# Aluminum welding

**URL:** <https://forums.speedlife.net/t/aluminum-welding/140330>\
**Category:** Canada Nissan Automotive\
**Created:** [October 15, 2005, 3:31pm UTC](https://forums.speedlife.net/t/aluminum-welding/140330 "2005-10-15T15:31:48Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![rocafella](https://avatars.discourse-cdn.com/v4/letter/r/bcef8e/32.png) [@rocafella](https://forums.speedlife.net/u/rocafella)\
**Post date:** [October 15, 2005, 3:31pm UTC](https://forums.speedlife.net/t/aluminum-welding/140330/1 "2005-10-15T15:31:48Z")

</div>

What’s a good car shop that can weld aluminum?

I called some exhuast places and they said they don’t do aluminum, I need to get a piece of my hotpipe cut and a bov welded on.

Thanks

---

<div class="post-metadata">

**Author:** ![monks](https://avatars.discourse-cdn.com/v4/letter/m/4bbf92/32.png) [@monks](https://forums.speedlife.net/u/monks)\
**Post date:** [October 15, 2005, 10:05pm UTC](https://forums.speedlife.net/t/aluminum-welding/140330/2 "2005-10-15T22:05:17Z")

</div>

were are u located if your in edmonton go to kimco welding they specialize in aluminum welding and for what u want done it shouldnt be much

---

<div class="post-metadata">

**Author:** ![chasenyadown](https://avatars.discourse-cdn.com/v4/letter/c/e79b87/32.png) [@chasenyadown](https://forums.speedlife.net/u/chasenyadown)\
**Post date:** [October 15, 2005, 11:36pm UTC](https://forums.speedlife.net/t/aluminum-welding/140330/3 "2005-10-15T23:36:46Z")

</div>

I’d even try calling Park Muffler they seem to do anything a customer wants to be done

---

<div class="post-metadata">

**Author:** ![rocafella](https://avatars.discourse-cdn.com/v4/letter/r/bcef8e/32.png) [@rocafella](https://forums.speedlife.net/u/rocafella)\
**Post date:** [October 16, 2005, 2:11pm UTC](https://forums.speedlife.net/t/aluminum-welding/140330/4 "2005-10-16T14:11:27Z")

</div>

Yea I was thinking of just bringing the piece to a welding shop but I’m not sure where I need it cut and welded so maybe a car shop that welds aluminum would be my best bet?

I have the HKS SSQV bov w/ hotpipe kit for the SR20 cause I thought I read somewhere that it would fit on a CA18 w/ front mount but the bov is mounted on the left side of the hotpipe so it gets in the way of the engine and needs to be removed and rewelded somewhere else. Also the end of one side of the piping is too long and needs to be cut.

---

<div class="post-metadata">

**Author:** ![Evan\_Mcclleland](https://avatars.discourse-cdn.com/v4/letter/e/41988e/32.png) [@Evan\_Mcclleland](https://forums.speedlife.net/u/Evan_Mcclleland)\
**Post date:** [October 17, 2005, 2:21pm UTC](https://forums.speedlife.net/t/aluminum-welding/140330/5 "2005-10-17T14:21:03Z")

</div>

talk to jason lange… hes a bit of a slut, but he can do it all!

---

<div class="post-metadata">

**Author:** ![Jason\_Lange](https://avatars.discourse-cdn.com/v4/letter/j/65b543/32.png) [@Jason\_Lange](https://forums.speedlife.net/u/Jason_Lange)\
**Post date:** [October 17, 2005, 2:37pm UTC](https://forums.speedlife.net/t/aluminum-welding/140330/6 "2005-10-17T14:37:11Z")

</div>

I sure can do it. I live in Calgary though.