# another heads cam motor i just finished **URL:** \ **Category:** PittSpeed Off Topic\ **Created:** [April 27, 2010, 9:50pm UTC](https://forums.speedlife.net/t/another-heads-cam-motor-i-just-finished/204923 "2010-04-27T21:50:28Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![1bad2.8](https://avatars.discourse-cdn.com/v4/letter/1/e0b2c6/32.png) [@1bad2.8](https://forums.speedlife.net/u/1bad2.8)\ **Post date:** [April 27, 2010, 9:50pm UTC](https://forums.speedlife.net/t/another-heads-cam-motor-i-just-finished/204923/1 "2010-04-27T21:50:28Z")
just finished up this motor for a member of thirdgen 2.8 v6 headers / cam / heads / ported intake / full ex system should make about 250 hp na and 400+ once it gets a turbo first startup vids [![http://i76.photobucket.com/albums/j39/lethalrides2k3/th_100_0422.jpg](http://i76.photobucket.com/albums/j39/lethalrides2k3/th_100_0422.jpg)](http://s76.photobucket.com/albums/j39/lethalrides2k3/?action=view¤t=100_0422.flv) [![http://i76.photobucket.com/albums/j39/lethalrides2k3/th_100_0421.jpg](http://i76.photobucket.com/albums/j39/lethalrides2k3/th_100_0421.jpg)](http://s76.photobucket.com/albums/j39/lethalrides2k3/?action=view¤t=100_0421.flv) has a hard time idling if i drop the idle speed below 1,200 so might need a lil tunning to get it to idle right with the cam thats in it gota see what happenes once the ex system is finishd and all the maf sensor is hooked back up i will say the car is clean as far as rot and rust on the bottom there is 0, and anything on the body is light surface rust nothing a lil sanding cant take care of should be a really nice car if the body work is done right and it gets painted ---
**Author:** ![Orr89rocz](https://avatars.discourse-cdn.com/v4/letter/o/ac91a4/32.png) [@Orr89rocz](https://forums.speedlife.net/u/Orr89rocz)\ **Post date:** [April 28, 2010, 3:48pm UTC](https://forums.speedlife.net/t/another-heads-cam-motor-i-just-finished/204923/2 "2010-04-28T15:48:32Z")
NOt bad for an old 2.8 ---
**Author:** ![1bad2.8](https://avatars.discourse-cdn.com/v4/letter/1/e0b2c6/32.png) [@1bad2.8](https://forums.speedlife.net/u/1bad2.8)\ **Post date:** [April 28, 2010, 6:41pm UTC](https://forums.speedlife.net/t/another-heads-cam-motor-i-just-finished/204923/3 "2010-04-28T18:41:21Z")
yeah sounds good anyways unfortunatly the car needs a set of rear springs one is actually broken, so i didnt get a chance to take it out and drive it. not that i could have goten far anyways there were no accessory’s bolted to the engine and hell the radiator wasnt even installed yet.the kid i did the motor for should have it back together this week hopefully ---
**Author:** ![fshowcars](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/fshowcars/32/5937_2.png) [@fshowcars](https://forums.speedlife.net/u/fshowcars)\ **Post date:** [April 30, 2010, 11:15am UTC](https://forums.speedlife.net/t/another-heads-cam-motor-i-just-finished/204923/4 "2010-04-30T11:15:36Z")
wow… that car looks rough ---
**Author:** ![1bad2.8](https://avatars.discourse-cdn.com/v4/letter/1/e0b2c6/32.png) [@1bad2.8](https://forums.speedlife.net/u/1bad2.8)\ **Post date:** [April 30, 2010, 11:34am UTC](https://forums.speedlife.net/t/another-heads-cam-motor-i-just-finished/204923/5 "2010-04-30T11:34:14Z")
> [@When Toyota needs durability....](https://forums.speedlife.net/t/when-toyota-needs-durability/42227/2): > > wow… that car looks rough somone rattle can primered the car and then hit it with rattle can black it looks like crap but the body is straight and 0 rust underneath so a lil tlc and it could be a really nice car ---
**Author:** ![Shaggy](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shaggy/32/5945_2.png) [@Shaggy](https://forums.speedlife.net/u/Shaggy)\ **Post date:** [April 30, 2010, 12:48pm UTC](https://forums.speedlife.net/t/another-heads-cam-motor-i-just-finished/204923/6 "2010-04-30T12:48:01Z")
I don’t miss the 1980’s at all. good luck with it