# Another Shitty Hyundai **URL:** \ **Category:** Builds\ **Created:** [March 14, 2010, 3:55pm UTC](https://forums.speedlife.net/t/another-shitty-hyundai/204712 "2010-03-14T15:55:57Z")\ **Posts on this page:** 12\ **Page:** 1
**Author:** ![yamaha](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/yamaha/32/5929_2.png) [@yamaha](https://forums.speedlife.net/u/yamaha)\ **Post date:** [March 14, 2010, 3:55pm UTC](https://forums.speedlife.net/t/another-shitty-hyundai/204712/1 "2010-03-14T15:55:57Z")
The motor 41mm crank block Block has been bored .020" over with Ross 9:1 forged pistons and Crower rods Pistons use custom thicker rings with more radial depth (compression rings are 1.8mm thick, oil ring is 3.00mm thick) Pistons have 0.05" wall clearance for ~500WHP power handling, but it sounds like a diesel when cold smile.gif Block has been decked to 0.015 quench clearance when cold Head ported by Manny Rodriguez of Saleen Custom set of ARP studs for both the head and main caps Air Ram intake HVE 58.5mm throttlebody HVE 4-1 header The fueling: 750CC peak-and-hold (low-impedance) injectors, freshly returned from RC Engineering pressure cleaning Aeromotive adjustable FPR (with guage) Stock fuel rail modified to accept an -8an line between the return end and the FPR Walbro 255LPH high-pressure unit (replaced it less than three months ago, as the old one died due to gunk in the tank) New fuel tank (as the stocker killed the old Walbro pump due to nasty gunk in it) New genuine Hyundai fuel filter Engine management: Haltech E6K 3 bar map Innovate LC1 wideband O2 sensor and associated Innovate DB (blue) gauge Compaq Armada M300 P3/600 + 64mb ram for tuning (yes, this will come with the car) Tuned sufficiently to allow normal driving, starting. Not “dyno tuned” to the current build though… Suspension So far as I know, this is the only 5-lug GK-swapped RD currently in any of the Hyundai forums. Prove me wrong? 2003 GK GT wheels painted black (some of the paint came off when mounting the new tires) and black lugs Goodyear Eagle F1 GS-D3 215/45ZR17 that have less than 200 miles on them H&R Touring Cup kit (springs + struts) with less than 200 miles Eibach front and rear sway bars Adjustable sway bar links Eibach camber adjustment bolts on all four corners Aligned at the same time that all the suspension and tires went on (ie, less than 200 miles ago) Brakes EBC dimpled and slotted 11" rotors for the GK Axxis Ultimate Ceramic brake pads Front calipers from a 2006 GT (Red with the silver “Hyundai” emblazoned on them) Stainless steel brake lines I bought this for $1,500, sold two parts for $900, and have another $50 into random shit to get it running. Installed a heavily modified stock intake manifold, going to be getting a tune first then off to Jeff’s for some fun. ![http://www.schulzjewelry.com/media/TibForSale/Tib_3.JPG](http://www.schulzjewelry.com/media/TibForSale/Tib_3.JPG) ![http://i71.photobucket.com/albums/i160/pod12597/carfront.jpg](http://i71.photobucket.com/albums/i160/pod12597/carfront.jpg) ![http://i71.photobucket.com/albums/i160/pod12597/carside.jpg](http://i71.photobucket.com/albums/i160/pod12597/carside.jpg) ---
**Author:** ![SixSpeed454SS](https://avatars.discourse-cdn.com/v4/letter/s/e19adc/32.png) [@SixSpeed454SS](https://forums.speedlife.net/u/SixSpeed454SS)\ **Post date:** [March 14, 2010, 5:54pm UTC](https://forums.speedlife.net/t/another-shitty-hyundai/204712/2 "2010-03-14T17:54:45Z")
I guess it is cheap enough. Good luck with it. ---
**Author:** ![BlkP42E](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/blkp42e/32/5938_2.png) [@BlkP42E](https://forums.speedlife.net/u/BlkP42E)\ **Post date:** [March 14, 2010, 6:43pm UTC](https://forums.speedlife.net/t/another-shitty-hyundai/204712/3 "2010-03-14T18:43:30Z")
lol awesome! ---
**Author:** ![Cheeks](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/cheeks/32/5930_2.png) [@Cheeks](https://forums.speedlife.net/u/Cheeks)\ **Post date:** [March 15, 2010, 7:25am UTC](https://forums.speedlife.net/t/another-shitty-hyundai/204712/4 "2010-03-15T07:25:06Z")
wtf is wrong with you? another hyundai?!?!? ---
**Author:** ![ZEX350Z](https://avatars.discourse-cdn.com/v4/letter/z/87869e/32.png) [@ZEX350Z](https://forums.speedlife.net/u/ZEX350Z)\ **Post date:** [March 15, 2010, 7:33am UTC](https://forums.speedlife.net/t/another-shitty-hyundai/204712/5 "2010-03-15T07:33:12Z")
It looks like we always go back to our roots. I stepped outside of the Honda scene for a while and now back in. I hate myself. ---
**Author:** ![spoolinsteve](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/spoolinsteve/32/6026_2.png) [@spoolinsteve](https://forums.speedlife.net/u/spoolinsteve)\ **Post date:** [March 15, 2010, 9:18am UTC](https://forums.speedlife.net/t/another-shitty-hyundai/204712/6 "2010-03-15T09:18:08Z")
I hope I dont go back to my roots, By the time the new car is finished DSM’s wont even be in junkyards anymore. Most will be in the dollar stores tool section hanging on the wall. ---
**Author:** ![imported\_steve](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/imported_steve/32/6050_2.png) [@imported\_steve](https://forums.speedlife.net/u/imported_steve)\ **Post date:** [March 15, 2010, 9:48am UTC](https://forums.speedlife.net/t/another-shitty-hyundai/204712/7 "2010-03-15T09:48:03Z")
And I thought you learned the error in your ways. You had me fooled I thought you were finally going to get a real car. FOR SHAME!!! ---
**Author:** ![foz](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/foz/32/6028_2.png) [@foz](https://forums.speedlife.net/u/foz)\ **Post date:** [March 15, 2010, 9:53am UTC](https://forums.speedlife.net/t/another-shitty-hyundai/204712/8 "2010-03-15T09:53:32Z")
I think you may be the only person I know that can’t seem to walk away from Hyundai! lol… good price for a little fun though ---
**Author:** ![SoLow](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/solow/32/6001_2.png) [@SoLow](https://forums.speedlife.net/u/SoLow)\ **Post date:** [March 15, 2010, 10:42am UTC](https://forums.speedlife.net/t/another-shitty-hyundai/204712/9 "2010-03-15T10:42:53Z")
oh jeesh…another 1 > [@Bush considering $800 tax rebate to boost US economy](https://forums.speedlife.net/t/bush-considering-800-tax-rebate-to-boost-us-economy/42063/35): > > I hope I dont go back to my roots, By the time the new car is finished DSM’s wont even be in junkyards anymore. Most will be in the dollar stores tool section hanging on the wall. 🤣 🤣 ---
**Author:** ![Darkstar](https://avatars.discourse-cdn.com/v4/letter/d/b487fb/32.png) [@Darkstar](https://forums.speedlife.net/u/Darkstar)\ **Post date:** [March 16, 2010, 9:08am UTC](https://forums.speedlife.net/t/another-shitty-hyundai/204712/10 "2010-03-16T09:08:18Z")
my pussy was dripping at the sight of this thread, but for $650 into it, even I can’t give you shit. ---
**Author:** ![yamaha](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/yamaha/32/5929_2.png) [@yamaha](https://forums.speedlife.net/u/yamaha)\ **Post date:** [April 9, 2010, 10:57am UTC](https://forums.speedlife.net/t/another-shitty-hyundai/204712/11 "2010-04-09T10:57:18Z")
Just a sneak peak. Precision 6360 turbo. Planning on a topmount and air/water intercooler. ![http://www.elantraxd.com/forums/attachment.php?attachmentid=13058](http://www.elantraxd.com/forums/attachment.php?attachmentid=13058) ![http://www.elantraxd.com/forums/attachment.php?attachmentid=13057](http://www.elantraxd.com/forums/attachment.php?attachmentid=13057) I ditched the 35r to build the manifold and buy some other parts. ---
**Author:** ![SupraSean](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/suprasean/32/6062_2.png) [@SupraSean](https://forums.speedlife.net/u/SupraSean)\ **Post date:** [April 11, 2010, 9:24am UTC](https://forums.speedlife.net/t/another-shitty-hyundai/204712/12 "2010-04-11T09:24:48Z")
To each there own. If you like what you got run it. i stepped outside of pupras for a short amount of time. and here i am less than a year later back in one,sorry “under one” … Good luck with the tib