# Another turbo camaro build **URL:** \ **Category:** Builds\ **Created:** [May 25, 2010, 7:41pm UTC](https://forums.speedlife.net/t/another-turbo-camaro-build/205036 "2010-05-25T19:41:07Z")\ **Posts on this page:** 1\ **Showing post:** 26
**Author:** ![1bad2.8](https://avatars.discourse-cdn.com/v4/letter/1/e0b2c6/32.png) [@1bad2.8](https://forums.speedlife.net/u/1bad2.8)\ **Post date:** [June 9, 2010, 4:08pm UTC](https://forums.speedlife.net/t/another-turbo-camaro-build/205036/26 "2010-06-09T16:08:13Z")
> [@Bush considering $800 tax rebate to boost US economy](https://forums.speedlife.net/t/bush-considering-800-tax-rebate-to-boost-us-economy/42063/73): > > Looks good man. Just wondering what size that turbo is? and the hotside? It just looks rather small that even a small v6 will choke up easily. Also for the hell of it pull your compressor cover off, we had a friend order a t70 turbo from ebay, and we pulled the compressor cover off, to find an evo3 16g wheel, no we werent guessing either, it was stamped on the inside, all they did was throw a huge compressor cover on it and call it a day, turbo wouldnt have made more than 350-400. (was going on a supra so 350-400 was a joke considering it made more on stock twins) just saying be weary check it over. the turbo is a 48 trim t4 verified and measured the hotside has 1.5 inch primarys to 2.5 inch collectors and crossover, t3 hotside with an .63 ar coldside is all 2.5 inch no alky at this time car will be setup to run 9-12 psi street and possibly more down the road my car went mid 12’s @ 9 psi with a t3/60-1 with the same style setup this car should run faster being it has a bigger motor but the smaller turbo will prolly have to run around 12 psi to run the same times my car did with the 60mm turbo the turbo thats going on is a starter turbo im sure he will upgrade later down the road i am going to recomend him to buy a gt35r or a t66/t70 if he upgrades --- _[View the full topic](https://forums.speedlife.net/t/another-turbo-camaro-build/205036)._