# Any Interest In a Dyno Tuning Session? **URL:** \ **Category:** PittSpeed Automotive\ **Created:** [October 20, 2009, 9:49am UTC](https://forums.speedlife.net/t/any-interest-in-a-dyno-tuning-session/203982 "2009-10-20T09:49:29Z")\ **Posts on this page:** 20\ **Page:** 24
**Author:** ![SK360](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sk360/32/5933_2.png) [@SK360](https://forums.speedlife.net/u/SK360)\ **Post date:** [April 23, 2010, 10:18pm UTC](https://forums.speedlife.net/t/any-interest-in-a-dyno-tuning-session/203982/461 "2010-04-23T22:18:59Z")
I think he just copy and pasted the Jeff’s shop part… if Ed is getting to Pittsburgh Performance around noon Sunday those in the first group I would say meet him there then get the cars down to Jeffs after so he can finish them up the next day with cold start and whatnot. Unless you live out Jeff’s way and want to follow cars out to Joe’s ---
**Author:** ![steelcitysix](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/steelcitysix/32/5992_2.png) [@steelcitysix](https://forums.speedlife.net/u/steelcitysix)\ **Post date:** [April 23, 2010, 10:55pm UTC](https://forums.speedlife.net/t/any-interest-in-a-dyno-tuning-session/203982/462 "2010-04-23T22:55:49Z")
pizza and beer shuttle ---
**Author:** ![edcmat-l1](https://avatars.discourse-cdn.com/v4/letter/e/e19b73/32.png) [@edcmat-l1](https://forums.speedlife.net/u/edcmat-l1)\ **Post date:** [April 24, 2010, 5:01am UTC](https://forums.speedlife.net/t/any-interest-in-a-dyno-tuning-session/203982/463 "2010-04-24T05:01:29Z")
> [@airport rant.](https://forums.speedlife.net/t/airport-rant/42211/4): > > ok, i guess i’ll have my car at Jeff’s Sunday morning then. i’ll get the car loaded on the trailer tomorrow. Don’t unload it at Jeff’s. We’ll just have you follow us to Joe’s. > [@My new booger!](https://forums.speedlife.net/t/my-new-booger/42206/14): > > My car is at jeffs now and was planning on leaving it there if jeffs ok with thst. Im still a little confused on how this is gonna work. Will you dyno and street tune the car the same day while im there? Then leave it over night for the cold start stuff? If you could just give us an idea how it went last time it might help me understand. Thanks. Don’t feel bad I’m cornfuzed too! If you’re gonna be there, that’s great. One more person to drive a car over to Joe’s. Because of the time frame on Sunnday, alot of the street tuning/driveability may not get done until Monday on the first group of cars. You figure I’ll only have about 6 hours or so Sunday to run a bunch of them through the dyno. > [@My new booger!](https://forums.speedlife.net/t/my-new-booger/42206/15): > > I wonder how long its gonna take for someone to say fuck it and let ed stay an extra week I’ll need a week to recover LOL. A liver transplant isn’t a bad idea either LOL > [@On another topic](https://forums.speedlife.net/t/42231/10): > > Does this mean we don’t go to Clairton for dyno? If you can meet us at the dyno, that would be great. BTW, do you have your 2 bar MAP sensor? > [@Whats new with your car for 2008?](https://forums.speedlife.net/t/whats-new-with-your-car-for-2008/42176/57): > > so whats up with beer? There will def be some beerage goin on! ---
**Author:** ![onyx\_rock](https://avatars.discourse-cdn.com/v4/letter/o/e8c25b/32.png) [@onyx\_rock](https://forums.speedlife.net/u/onyx_rock)\ **Post date:** [April 24, 2010, 6:59am UTC](https://forums.speedlife.net/t/any-interest-in-a-dyno-tuning-session/203982/464 "2010-04-24T06:59:59Z")
Ok Ed. Im in the second group anyway and am off of work Tue -Fri so I can come down two days if necessary. I will call Jeff Monday afternoon. ---
**Author:** ![2004ctsv](https://avatars.discourse-cdn.com/v4/letter/2/13edae/32.png) [@2004ctsv](https://forums.speedlife.net/u/2004ctsv)\ **Post date:** [April 24, 2010, 7:48am UTC](https://forums.speedlife.net/t/any-interest-in-a-dyno-tuning-session/203982/465 "2010-04-24T07:48:59Z")
Ed Could you bring the MAP sensor with you? I sent you an email too See you at the shop in Clairton around noon tomorrow. Jeff’s shop is about 30 miles from home (but 2 miles from work when the road’s open) ---
**Author:** ![edcmat-l1](https://avatars.discourse-cdn.com/v4/letter/e/e19b73/32.png) [@edcmat-l1](https://forums.speedlife.net/u/edcmat-l1)\ **Post date:** [April 24, 2010, 1:35pm UTC](https://forums.speedlife.net/t/any-interest-in-a-dyno-tuning-session/203982/466 "2010-04-24T13:35:54Z")
Tony, you really lucked out! I gots uno hear. I be bringin it wit me. ---
**Author:** ![2004ctsv](https://avatars.discourse-cdn.com/v4/letter/2/13edae/32.png) [@2004ctsv](https://forums.speedlife.net/u/2004ctsv)\ **Post date:** [April 24, 2010, 1:40pm UTC](https://forums.speedlife.net/t/any-interest-in-a-dyno-tuning-session/203982/467 "2010-04-24T13:40:10Z")
mucho grassy ass ---
**Author:** ![edcmat-l1](https://avatars.discourse-cdn.com/v4/letter/e/e19b73/32.png) [@edcmat-l1](https://forums.speedlife.net/u/edcmat-l1)\ **Post date:** [April 24, 2010, 3:50pm UTC](https://forums.speedlife.net/t/any-interest-in-a-dyno-tuning-session/203982/468 "2010-04-24T15:50:31Z")
Say what? I ain’t got no grassy ass!! i b O-fended!! LOL J/K approx 12 hours to wheels up!!! ---
**Author:** ![Nsty98LS1](https://avatars.discourse-cdn.com/v4/letter/n/cc9497/32.png) [@Nsty98LS1](https://forums.speedlife.net/u/Nsty98LS1)\ **Post date:** [April 25, 2010, 4:47am UTC](https://forums.speedlife.net/t/any-interest-in-a-dyno-tuning-session/203982/469 "2010-04-25T04:47:41Z")
i’m gonna meet up with you guys at the dyno. i’m leaving my house in 10 minutes ---
**Author:** ![SK360](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sk360/32/5933_2.png) [@SK360](https://forums.speedlife.net/u/SK360)\ **Post date:** [April 25, 2010, 9:00pm UTC](https://forums.speedlife.net/t/any-interest-in-a-dyno-tuning-session/203982/470 "2010-04-25T21:00:48Z")
Pretty successful day 1! ---
**Author:** ![spoolinsteve](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/spoolinsteve/32/6026_2.png) [@spoolinsteve](https://forums.speedlife.net/u/spoolinsteve)\ **Post date:** [April 25, 2010, 9:47pm UTC](https://forums.speedlife.net/t/any-interest-in-a-dyno-tuning-session/203982/471 "2010-04-25T21:47:32Z")
results!!! ---
**Author:** ![danhr](https://avatars.discourse-cdn.com/v4/letter/d/f4b2a3/32.png) [@danhr](https://forums.speedlife.net/u/danhr)\ **Post date:** [April 26, 2010, 5:12am UTC](https://forums.speedlife.net/t/any-interest-in-a-dyno-tuning-session/203982/472 "2010-04-26T05:12:38Z")
I made 782 rwhp ---
**Author:** ![Shaggy](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shaggy/32/5945_2.png) [@Shaggy](https://forums.speedlife.net/u/Shaggy)\ **Post date:** [April 26, 2010, 5:26am UTC](https://forums.speedlife.net/t/any-interest-in-a-dyno-tuning-session/203982/473 "2010-04-26T05:26:01Z")
Supra 13’s ^ 🤣 Wheres my beef with broccoli, cunt ?! ---
**Author:** ![czwalga00gt](https://avatars.discourse-cdn.com/v4/letter/c/6bbea6/32.png) [@czwalga00gt](https://forums.speedlife.net/u/czwalga00gt)\ **Post date:** [April 26, 2010, 9:36am UTC](https://forums.speedlife.net/t/any-interest-in-a-dyno-tuning-session/203982/474 "2010-04-26T09:36:42Z")
Unfortunately the turbo ls2 Rx7 will not be attending. I put 46 hours in from fri-sun. Only to be thwarted by thedriveshaftshop on my axles again (3rd time). ---
**Author:** ![BoostedYards86](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/boostedyards86/32/6048_2.png) [@BoostedYards86](https://forums.speedlife.net/u/BoostedYards86)\ **Post date:** [April 26, 2010, 9:53am UTC](https://forums.speedlife.net/t/any-interest-in-a-dyno-tuning-session/203982/475 "2010-04-26T09:53:25Z")
sounds like the driveshaftshop… ---
**Author:** ![SK360](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sk360/32/5933_2.png) [@SK360](https://forums.speedlife.net/u/SK360)\ **Post date:** [April 26, 2010, 10:13am UTC](https://forums.speedlife.net/t/any-interest-in-a-dyno-tuning-session/203982/476 "2010-04-26T10:13:31Z")
Damn Steve… sorry to hear ☹ ---
**Author:** ![edcmat-l1](https://avatars.discourse-cdn.com/v4/letter/e/e19b73/32.png) [@edcmat-l1](https://forums.speedlife.net/u/edcmat-l1)\ **Post date:** [April 26, 2010, 3:01pm UTC](https://forums.speedlife.net/t/any-interest-in-a-dyno-tuning-session/203982/477 "2010-04-26T15:01:39Z")
> [@Talk about picking the wrong place to break into](https://forums.speedlife.net/t/talk-about-picking-the-wrong-place-to-break-into/42210/7): > > Unfortunately the turbo ls2 Rx7 will not be attending. I put 46 hours in from fri-sun. Only to be thwarted by thedriveshaftshop on my axles again (3rd time). Bummer…Sorry to hear. ---
**Author:** ![spoolinsteve](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/spoolinsteve/32/6026_2.png) [@spoolinsteve](https://forums.speedlife.net/u/spoolinsteve)\ **Post date:** [April 26, 2010, 7:49pm UTC](https://forums.speedlife.net/t/any-interest-in-a-dyno-tuning-session/203982/478 "2010-04-26T19:49:36Z")
what the heck, I thought they can make driveshafts and cv shafts and stuff… better call up RAXLES. they might be able to help you. ---
**Author:** ![SK360](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sk360/32/5933_2.png) [@SK360](https://forums.speedlife.net/u/SK360)\ **Post date:** [April 27, 2010, 4:07am UTC](https://forums.speedlife.net/t/any-interest-in-a-dyno-tuning-session/203982/479 "2010-04-27T04:07:19Z")
Anyone else on the fence? We can get you in! lol ---
**Author:** ![czwalga00gt](https://avatars.discourse-cdn.com/v4/letter/c/6bbea6/32.png) [@czwalga00gt](https://forums.speedlife.net/u/czwalga00gt)\ **Post date:** [April 27, 2010, 6:44am UTC](https://forums.speedlife.net/t/any-interest-in-a-dyno-tuning-session/203982/480 "2010-04-27T06:44:13Z")
Dammit i’m still pissed haha. I’m shipping the axles back today to have them machined again. Steve, they keep sending me the wrong parts. The diff I have is out of a 2000 viper. First they sent me stub axles from a 03+, then they sent me stubs for the 2000 version. The splines weren’t machined long enough by about 1/8" so I couldn’t put them in all the way. I sent them back they machined and annealed them again. THey thought that I meant the splines were not wide enough… I meant long. I sent pics too so they must have not seen them or understood what was going on. Finally get stubs that fit. I measure they send me my axles, I get them friday. The out CV is not the right one. I didn’t realize this till sunday night. Up until that point I had full intentions of getting this thing to jeffs, by today or tomorrow at the latest. I’ll be stopping down jeff’s tomorrow just to talk to Ed, me and a few friends might take a mini vacation down to va beach and trailor it down. I know I dont have to go to ed, but it would be nice since he comes to the pitt area every now and then… and why not? Trip to va beach isn’t too bad. [Previous page](https://forums.speedlife.net/t/any-interest-in-a-dyno-tuning-session/203982.md?page=23) [Next page](https://forums.speedlife.net/t/any-interest-in-a-dyno-tuning-session/203982.md?page=25)