# any residential heating and a/c guys on here **URL:** \ **Category:** PittSpeed Off Topic\ **Created:** [December 14, 2005, 7:56am UTC](https://forums.speedlife.net/t/any-residential-heating-and-a-c-guys-on-here/178835 "2005-12-14T07:56:08Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [December 14, 2005, 7:56am UTC](https://forums.speedlife.net/t/any-residential-heating-and-a-c-guys-on-here/178835/1 "2005-12-14T07:56:08Z")
i got a question about my furnace that keeps freezing up and shuting of. ---
**Author:** ![eurodad](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/eurodad/32/5988_2.png) [@eurodad](https://forums.speedlife.net/u/eurodad)\ **Post date:** [December 14, 2005, 7:59am UTC](https://forums.speedlife.net/t/any-residential-heating-and-a-c-guys-on-here/178835/2 "2005-12-14T07:59:34Z")
bravada442 ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [December 14, 2005, 8:12am UTC](https://forums.speedlife.net/t/any-residential-heating-and-a-c-guys-on-here/178835/3 "2005-12-14T08:12:28Z")
cool thanks ---
**Author:** ![S10Blazed\_Si](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/s10blazed_si/32/5983_2.png) [@S10Blazed\_Si](https://forums.speedlife.net/u/S10Blazed_Si)\ **Post date:** [December 14, 2005, 8:38am UTC](https://forums.speedlife.net/t/any-residential-heating-and-a-c-guys-on-here/178835/4 "2005-12-14T08:38:11Z")
Sean’s (Bravada442) in FL for the week. ---
**Author:** ![sonic03snake](https://avatars.discourse-cdn.com/v4/letter/s/898d66/32.png) [@sonic03snake](https://forums.speedlife.net/u/sonic03snake)\ **Post date:** [December 14, 2005, 9:43am UTC](https://forums.speedlife.net/t/any-residential-heating-and-a-c-guys-on-here/178835/5 "2005-12-14T09:43:24Z")
Cam99 on steelcity. ---
**Author:** ![eurodad](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/eurodad/32/5988_2.png) [@eurodad](https://forums.speedlife.net/u/eurodad)\ **Post date:** [December 14, 2005, 9:45am UTC](https://forums.speedlife.net/t/any-residential-heating-and-a-c-guys-on-here/178835/6 "2005-12-14T09:45:58Z")
> [@sonic03snake](#): > > Cam99 on steelcity. ^^he would be more local also ---
**Author:** ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)\ **Post date:** [December 14, 2005, 9:55am UTC](https://forums.speedlife.net/t/any-residential-heating-and-a-c-guys-on-here/178835/7 "2005-12-14T09:55:49Z")
> [@sonic03snake](#): > > Cam99 on steelcity. he’s also here ---
**Author:** ![Bravada\_442](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bravada_442/32/5982_2.png) [@Bravada\_442](https://forums.speedlife.net/u/Bravada_442)\ **Post date:** [December 14, 2005, 10:10am UTC](https://forums.speedlife.net/t/any-residential-heating-and-a-c-guys-on-here/178835/8 "2005-12-14T10:10:34Z")
PM is answered. John’s right, I’m on my way to FL, im in Baltimore right now and luckily the place were at has wireless so im able to connect and read the site for a little bit. ---
**Author:** ![slowcamaro](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/slowcamaro/32/5975_2.png) [@slowcamaro](https://forums.speedlife.net/u/slowcamaro)\ **Post date:** [December 14, 2005, 10:16am UTC](https://forums.speedlife.net/t/any-residential-heating-and-a-c-guys-on-here/178835/9 "2005-12-14T10:16:11Z")
oneslowtie might be able to help also ---
**Author:** ![Shaggy](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shaggy/32/5945_2.png) [@Shaggy](https://forums.speedlife.net/u/Shaggy)\ **Post date:** [December 14, 2005, 10:25am UTC](https://forums.speedlife.net/t/any-residential-heating-and-a-c-guys-on-here/178835/10 "2005-12-14T10:25:07Z")
oneslowbowtie works for trane. ---
**Author:** ![cleanquick306](https://avatars.discourse-cdn.com/v4/letter/c/48db29/32.png) [@cleanquick306](https://forums.speedlife.net/u/cleanquick306)\ **Post date:** [December 14, 2005, 10:31am UTC](https://forums.speedlife.net/t/any-residential-heating-and-a-c-guys-on-here/178835/11 "2005-12-14T10:31:53Z")
i have a friend who works for L. S. Hafer (dunno how its spelled), his dad owns it he’s been doing it a long time himself, but he doesnt have his phone on during the day…i can call him if you still need help after 6 ---
**Author:** ![mustang03gt](https://avatars.discourse-cdn.com/v4/letter/m/35a633/32.png) [@mustang03gt](https://forums.speedlife.net/u/mustang03gt)\ **Post date:** [December 14, 2005, 10:38am UTC](https://forums.speedlife.net/t/any-residential-heating-and-a-c-guys-on-here/178835/12 "2005-12-14T10:38:09Z")
is the pilot just going out? only reason i asked this is cause i had this happen, the pilot wouldnt stay lit. all it needed was a thermalcupple (one word i def cant spell). its like a couple bux at home depot. fixed her right up! 🙂 ---
**Author:** ![Atreyu](https://avatars.discourse-cdn.com/v4/letter/a/5e9695/32.png) [@Atreyu](https://forums.speedlife.net/u/Atreyu)\ **Post date:** [December 14, 2005, 10:43am UTC](https://forums.speedlife.net/t/any-residential-heating-and-a-c-guys-on-here/178835/13 "2005-12-14T10:43:14Z")
> [@mustang03gt](#): > > all it needed was a thermocouple. their are quite interesting in their simplicity, only two different metal wires that produce a small voltage as the temperature at the two seperate ends varies. Sorry for the lesson, im bored as hell! ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [December 14, 2005, 11:07am UTC](https://forums.speedlife.net/t/any-residential-heating-and-a-c-guys-on-here/178835/14 "2005-12-14T11:07:59Z")
heres the problem im dealing with(if this makes any sense). there 2 pipes that go from the furnace to the outside of the house they both turn 90 degrees to the grond one is longer than the other. the longer one is the exhaust so when the furnace is on it blows out the hot air the shorter pipe next to it is on a little of a suction which sucks up some of the hot air as it blows out of the longer pipe. so everytime the tempature drops below freezing the sorter pipe with the suction clogs with ice/snow and then the furnace shuts off. you have to go out suide and stick a coat hanger in the short pipe to clean out the ice/snow then you can reset the furnace and it will start. i was thinking of putting a piece of plexaglass between the 2 pipes to seperate them just in case the condesation from the hot pipe is getting into the other pipe and causeing it to freeze. or should the pipe that blows exahust out be the shorter pipe and the longer pipe be the suction pipe? both the pipes exit the house about 3’ off the ground so the shorter pipe isnt sucking snow off the ground.thanks for the help everyone. ---
**Author:** ![German\_with\_a\_Bowtie](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/german_with_a_bowtie/32/5967_2.png) [@German\_with\_a\_Bowtie](https://forums.speedlife.net/u/German_with_a_Bowtie)\ **Post date:** [December 14, 2005, 11:37am UTC](https://forums.speedlife.net/t/any-residential-heating-and-a-c-guys-on-here/178835/15 "2005-12-14T11:37:51Z")
I told you that makin whiskey in the basement was gonna cause problems! Sent you a pm ---
**Author:** ![Darkstar](https://avatars.discourse-cdn.com/v4/letter/d/b487fb/32.png) [@Darkstar](https://forums.speedlife.net/u/Darkstar)\ **Post date:** [December 14, 2005, 11:42am UTC](https://forums.speedlife.net/t/any-residential-heating-and-a-c-guys-on-here/178835/16 "2005-12-14T11:42:18Z")
> [@Vapor Trail](#): > > heres the problem im dealing with(if this makes any sense). there 2 pipes that go from the furnace to the outside of the house they both turn 90 degrees to the grond one is longer than the other. the longer one is the exhaust so when the furnace is on it blows out the hot air the shorter pipe next to it is on a little of a suction which sucks up some of the hot air as it blows out of the longer pipe. so everytime the tempature drops below freezing the sorter pipe with the suction clogs with ice/snow and then the furnace shuts off. you have to go out suide and stick a coat hanger in the short pipe to clean out the ice/snow then you can reset the furnace and it will start. i was thinking of putting a piece of plexaglass between the 2 pipes to seperate them just in case the condesation from the hot pipe is getting into the other pipe and causeing it to freeze. or should the pipe that blows exahust out be the shorter pipe and the longer pipe be the suction pipe? both the pipes exit the house about 3’ off the ground so the shorter pipe isnt sucking snow off the ground.thanks for the help everyone. the plexiglass idea seems good. :dunno: ---
**Author:** ![vtecsol](https://avatars.discourse-cdn.com/v4/letter/v/b5ac83/32.png) [@vtecsol](https://forums.speedlife.net/u/vtecsol)\ **Post date:** [December 14, 2005, 1:47pm UTC](https://forums.speedlife.net/t/any-residential-heating-and-a-c-guys-on-here/178835/17 "2005-12-14T13:47:21Z")
i just talked to the guys here at work eric and they are saying that those pipes are supposed to be like 3 feet apart they also said that you could put like 90 degree elbows on the end make one go left and one go right then down ---
**Author:** ![Cam99](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/cam99/32/6012_2.png) [@Cam99](https://forums.speedlife.net/u/Cam99)\ **Post date:** [December 15, 2005, 7:12pm UTC](https://forums.speedlife.net/t/any-residential-heating-and-a-c-guys-on-here/178835/18 "2005-12-15T19:12:24Z")
The pipes don’t need to be 3 feet apart, however they do need to be 3 feet or so off the ground ( well above snow level). The exhaust should be a good 12-18" longer than the intake pipe. If the condensation is freezing the intake pipe and not snow or ice dripping from above it you can put a 45 degree PVC fitting on each of them aimed in opposite directions to keep the contact down. You could put plexiglass between them , but shouldn’t have to. ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [December 15, 2005, 8:03pm UTC](https://forums.speedlife.net/t/any-residential-heating-and-a-c-guys-on-here/178835/19 "2005-12-15T20:03:47Z")
thanks for the replies everyone > [@Cam99](#): > > The pipes don’t need to be 3 feet apart, however they do need to be 3 feet or so off the ground ( well above snow level). The exhaust should be a good 12-18" longer than the intake pipe. If the condensation is freezing the intake pipe and not snow or ice dripping from above it you can put a 45 degree PVC fitting on each of them aimed in opposite directions to keep the contact down. You could put plexiglass between them , but shouldn’t have to. its set up just like you said it should be. i put the plexiglass between it, and so far so good, other than it looks stupid. im gonna give the 45 degree fittings a shot. thanks for your help. ---
**Author:** ![Cam99](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/cam99/32/6012_2.png) [@Cam99](https://forums.speedlife.net/u/Cam99)\ **Post date:** [December 15, 2005, 8:30pm UTC](https://forums.speedlife.net/t/any-residential-heating-and-a-c-guys-on-here/178835/20 "2005-12-15T20:30:45Z")
No problem.