# Anybody have a roof guy?

**URL:** <https://forums.speedlife.net/t/anybody-have-a-roof-guy/1414192>\
**Category:** NYSpeed Automotive\
**Created:** [September 14, 2022, 11:01am UTC](https://forums.speedlife.net/t/anybody-have-a-roof-guy/1414192 "2022-09-14T11:01:51Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![ubengineering](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ubengineering/32/5171_2.png) [@ubengineering](https://forums.speedlife.net/u/ubengineering)\
**Post date:** [September 14, 2022, 11:01am UTC](https://forums.speedlife.net/t/anybody-have-a-roof-guy/1414192/1 "2022-09-14T11:01:51Z")

</div>

Can’t seem to get a hold of mine. May need some recommendations. Seal around my chimney is dripping in my attic. Don’t want it to get worse. Roof is less than 10 years old.

---

<div class="post-metadata">

**Author:** ![Onyx\_Z32](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/onyx_z32/32/7581_2.png) [@Onyx\_Z32](https://forums.speedlife.net/u/Onyx_Z32)\
**Post date:** [September 14, 2022, 11:12am UTC](https://forums.speedlife.net/t/anybody-have-a-roof-guy/1414192/2 "2022-09-14T11:12:31Z")

</div>

Damn I’m looking for soffit repair myself.

Temporary (or semi perm) solution to your leak: go to Home Depot and buy this:

> **[Henry 209XR Extreme Rubberized Wet Patch Roof Cement Leak Repair - 0.90...](https://www.homedepot.com/p/Henry-209XR-Extreme-Rubberized-Wet-Patch-Roof-Cement-Leak-Repair-0-90-Gallon-HE209142/100002730?ITC=AUC-144361-23-12145)**
>
> Henry 209XR Extreme Rubberized Wet Patch Roof Leak Repair is an ultra-premium, rubberized roof sealant with excellent adhesion, especially at moving joints where its flexibility and elasticity make it

They make it in caulking tube size too.

Also snag some of that fabric mesh to lay down first.

This shit works. I made a repair years ago and it’s still holding. Doesn’t look great, but nothing is getting through it.

---

<div class="post-metadata">

**Author:** ![LUC1F3R](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/luc1f3r/32/7299_2.png) [@LUC1F3R](https://forums.speedlife.net/u/LUC1F3R)\
**Post date:** [September 14, 2022, 11:26am UTC](https://forums.speedlife.net/t/anybody-have-a-roof-guy/1414192/3 "2022-09-14T11:26:11Z")

</div>

I second @Onyx_Z32  
I had to make some repairs around our chimney that lasted about 4 years and then had the whole roof replaced. Chimney is a tough spot, especially if its off to one side on your roof. Make sure your capstone is good too, could be getting in there.

---

<div class="post-metadata">

**Author:** ![JayS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jays/32/15375_2.png) [@JayS](https://forums.speedlife.net/u/JayS)\
**Post date:** [September 14, 2022, 11:43am UTC](https://forums.speedlife.net/t/anybody-have-a-roof-guy/1414192/4 "2022-09-14T11:43:27Z")

</div>

I used a bucket of the Henry stuff on my chimney a couple years ago and haven’t had an issue since. I put on a coat of the tar, then wrapped some of this and embedded it into the first coat, then went back over it with more tar.

> **[Henry 181 4 in. x 150 ft. Asphalt Glass Fabric HE181195 - The Home Depot](https://www.homedepot.com/p/Henry-181-4-in-x-150-ft-Asphalt-Glass-Fabric-HE181195/100047055)**
>
> Henry 181 repair fabric is a woven fabric, made of flexible filaments of pure glass saturated with asphalt. It has tensil strength of 75 lbs. per in., giving it stability and durability. It is also acid

Basically treated it like fiberglass if you’ve ever worked with that. Seemed like a very solid repair when I was done.

---

<div class="post-metadata">

**Author:** ![Motocrossx23](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/motocrossx23/32/5120_2.png) [@Motocrossx23](https://forums.speedlife.net/u/Motocrossx23)\
**Post date:** [September 14, 2022, 1:12pm UTC](https://forums.speedlife.net/t/anybody-have-a-roof-guy/1414192/5 "2022-09-14T13:12:41Z")

</div>

I’m having the same issue with mine, leaking into the attic too. Had some company that started with F…idk what, come by and they quoted me $1400 to fix the chimney or $1200 to tear it down. I’m leaning to the latter and then going with a power vented hot water tank.

---

<div class="post-metadata">

**Author:** ![LUC1F3R](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/luc1f3r/32/7299_2.png) [@LUC1F3R](https://forums.speedlife.net/u/LUC1F3R)\
**Post date:** [September 14, 2022, 1:53pm UTC](https://forums.speedlife.net/t/anybody-have-a-roof-guy/1414192/6 "2022-09-14T13:53:03Z")

</div>

Good idea

---

<div class="post-metadata">

**Author:** ![ubengineering](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ubengineering/32/5171_2.png) [@ubengineering](https://forums.speedlife.net/u/ubengineering)\
**Post date:** [September 14, 2022, 2:47pm UTC](https://forums.speedlife.net/t/anybody-have-a-roof-guy/1414192/7 "2022-09-14T14:47:12Z")

</div>

Thanks for the suggestions fellas, gotta get this figured out before winter.

---

<div class="post-metadata">

**Author:** ![ubengineering](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ubengineering/32/5171_2.png) [@ubengineering](https://forums.speedlife.net/u/ubengineering)\
**Post date:** [September 15, 2022, 5:41pm UTC](https://forums.speedlife.net/t/anybody-have-a-roof-guy/1414192/8 "2022-09-15T17:41:17Z")

</div>

Put on the stuff recommended by @Onyx_Z32

Next rainfall will be the test!

---

<div class="post-metadata">

**Author:** ![ubengineering](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ubengineering/32/5171_2.png) [@ubengineering](https://forums.speedlife.net/u/ubengineering)\
**Post date:** [September 19, 2022, 2:32pm UTC](https://forums.speedlife.net/t/anybody-have-a-roof-guy/1414192/9 "2022-09-19T14:32:30Z")

</div>

Didn’t leak yesterday but we had light rain. Today will be the true test.
