# anyone a tech at a dodge dealer?

**URL:** <https://forums.speedlife.net/t/anyone-a-tech-at-a-dodge-dealer/27173>\
**Category:** NYSpeed Off Topic\
**Created:** [April 5, 2007, 6:22pm UTC](https://forums.speedlife.net/t/anyone-a-tech-at-a-dodge-dealer/27173 "2007-04-05T18:22:20Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![intense98rt](https://avatars.discourse-cdn.com/v4/letter/i/77aa72/32.png) [@intense98rt](https://forums.speedlife.net/u/intense98rt)\
**Post date:** [April 5, 2007, 6:22pm UTC](https://forums.speedlife.net/t/anyone-a-tech-at-a-dodge-dealer/27173/1 "2007-04-05T18:22:20Z")

</div>

After my motor swap I’m getting a CEL, a code 11.  
I need a someone with access to a DRB that could help me out.  
this is what I have been told on [neons.org](http://neons.org)

> If the code 11 is because of too much difference from the original timing, you will need the DRB3 to do the relearn procedure.  
> This is also called the ‘cam/crank relearn’. The dealer has the ability to ‘reset’ the PCM to accept a ‘new’ TDC value.

I won’t be able to get my car inspected unless I take care of this.

---

<div class="post-metadata">

**Author:** ![intense98rt](https://avatars.discourse-cdn.com/v4/letter/i/77aa72/32.png) [@intense98rt](https://forums.speedlife.net/u/intense98rt)\
**Post date:** [April 19, 2007, 2:57pm UTC](https://forums.speedlife.net/t/anyone-a-tech-at-a-dodge-dealer/27173/2 "2007-04-19T14:57:46Z")

</div>

I went to the dealer and they want $80 to flash/update the ecu, and they arent even positive it will do anything. So anyone else know someone that has a DRB? I’m going to double check the timing again before I do anything tho.