# Anyone ever do A-Arm bushings in a 97+ Grand Prix?

**URL:** <https://forums.speedlife.net/t/anyone-ever-do-a-arm-bushings-in-a-97-grand-prix/172803>\
**Category:** PittSpeed Off Topic\
**Created:** [March 7, 2005, 6:27pm UTC](https://forums.speedlife.net/t/anyone-ever-do-a-arm-bushings-in-a-97-grand-prix/172803 "2005-03-07T18:27:59Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![bics56](https://avatars.discourse-cdn.com/v4/letter/b/47e85d/32.png) [@bics56](https://forums.speedlife.net/u/bics56)\
**Post date:** [March 7, 2005, 6:27pm UTC](https://forums.speedlife.net/t/anyone-ever-do-a-arm-bushings-in-a-97-grand-prix/172803/1 "2005-03-07T18:27:59Z")

</div>

I am pretty sure my a-arm bushings are shot in my GTP. Outside of my tires are wearing fast and I think i can hear the a-arm rattle when pulling into my driveway. I had the same problem with my old car and paid to have them done. I want to do it myself to save some cash. I was told I wont need a press to put them in…a c-clam should be fine. Is this true. Also if someone could provide a little guidance on how to do it and if there is anything to look out for it would be appreciated.

---

<div class="post-metadata">

**Author:** ![GNocide](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/gnocide/32/5947_2.png) [@GNocide](https://forums.speedlife.net/u/GNocide)\
**Post date:** [March 7, 2005, 7:22pm UTC](https://forums.speedlife.net/t/anyone-ever-do-a-arm-bushings-in-a-97-grand-prix/172803/2 "2005-03-07T19:22:52Z")

</div>

jjs is where id go eff i were you

---

<div class="post-metadata">

**Author:** ![Stroker](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/stroker/32/5948_2.png) [@Stroker](https://forums.speedlife.net/u/Stroker)\
**Post date:** [March 7, 2005, 7:52pm UTC](https://forums.speedlife.net/t/anyone-ever-do-a-arm-bushings-in-a-97-grand-prix/172803/3 "2005-03-07T19:52:09Z")

</div>

their cake 20 min a side

---

<div class="post-metadata">

**Author:** ![customandsound](https://avatars.discourse-cdn.com/v4/letter/c/f08c70/32.png) [@customandsound](https://forums.speedlife.net/u/customandsound)\
**Post date:** [March 7, 2005, 7:57pm UTC](https://forums.speedlife.net/t/anyone-ever-do-a-arm-bushings-in-a-97-grand-prix/172803/4 "2005-03-07T19:57:00Z")

</div>

> [@Dick Starbucks](#):
>
> jjs is where id go eff i were you

Yep that is where i would take it

---

<div class="post-metadata">

**Author:** ![22PSI](https://avatars.discourse-cdn.com/v4/letter/2/4af34b/32.png) [@22PSI](https://forums.speedlife.net/u/22PSI)\
**Post date:** [March 7, 2005, 8:53pm UTC](https://forums.speedlife.net/t/anyone-ever-do-a-arm-bushings-in-a-97-grand-prix/172803/5 "2005-03-07T20:53:52Z")

</div>

> [@Stroker](#):
>
> their cake 20 min a side

x2 they are not hard at all, its trickier getting the arm to line up back in the frame

---

<div class="post-metadata">

**Author:** ![bics56](https://avatars.discourse-cdn.com/v4/letter/b/47e85d/32.png) [@bics56](https://forums.speedlife.net/u/bics56)\
**Post date:** [March 8, 2005, 12:39pm UTC](https://forums.speedlife.net/t/anyone-ever-do-a-arm-bushings-in-a-97-grand-prix/172803/6 "2005-03-08T12:39:40Z")

</div>

So I just take out the lower a-arm bushing bolts…pop ou the old ones and pop in the new ones and put the bolts back in?