# Anyone have a pulley puller?

**URL:** <https://forums.speedlife.net/t/anyone-have-a-pulley-puller/170377>\
**Category:** PittSpeed Off Topic\
**Created:** [November 14, 2004, 2:28pm UTC](https://forums.speedlife.net/t/anyone-have-a-pulley-puller/170377 "2004-11-14T14:28:37Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![bics56](https://avatars.discourse-cdn.com/v4/letter/b/47e85d/32.png) [@bics56](https://forums.speedlife.net/u/bics56)\
**Post date:** [November 14, 2004, 2:28pm UTC](https://forums.speedlife.net/t/anyone-have-a-pulley-puller/170377/1 "2004-11-14T14:28:37Z")

</div>

I just installed a FWI, 180 T-stat, and AC Delco 41-932 plugs on my GTP. I have a 3.4" pulley waiting to be put on, but have no pulley puller. I got one from pep boys but it was the wrong type. So if anyone on here has one that would work I would apprecaite it if they could meet up w/me and help me swap out the stock one. 🙂 Also if anyone has a scan tool for me car that would be cool too so I can see if I have any KR with the smaller pulley.

---

<div class="post-metadata">

**Author:** ![Jeff95TA](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jeff95ta/32/5935_2.png) [@Jeff95TA](https://forums.speedlife.net/u/Jeff95TA)\
**Post date:** [November 14, 2004, 4:07pm UTC](https://forums.speedlife.net/t/anyone-have-a-pulley-puller/170377/2 "2004-11-14T16:07:19Z")

</div>

> [@bics56](#):
>
> I just installed a FWI, 180 T-stat, and AC Delco 41-932 plugs on my GTP. I have a 3.4" pulley waiting to be put on, but have no pulley puller. I got one from pep boys but it was the wrong type. So if anyone on here has one that would work I would apprecaite it if they could meet up w/me and help me swap out the stock one. 🙂 Also if anyone has a scan tool for me car that would be cool too so I can see if I have any KR with the smaller pulley.

If I remember correctly, you can’t use a regular pulley puller to get those off. Check with SleeperGTP - I think he may know some people from the GP club that may have one.

What kind did you get? I have a three claw puller that you can try.

---

<div class="post-metadata">

**Author:** ![Jeff95TA](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jeff95ta/32/5935_2.png) [@Jeff95TA](https://forums.speedlife.net/u/Jeff95TA)\
**Post date:** [November 14, 2004, 4:23pm UTC](https://forums.speedlife.net/t/anyone-have-a-pulley-puller/170377/3 "2004-11-14T16:23:05Z")

</div>

This might help you out if you can’t find one.

[http://www.zzperformance.com/zzp/products/supercharger\_pulley\_puller.htm](http://www.zzperformance.com/zzp/products/supercharger_pulley_puller.htm)

I’m pretty sure you could just make something that would work though if you know the thread size in the snout.

---

<div class="post-metadata">

**Author:** ![RezarSPER](https://avatars.discourse-cdn.com/v4/letter/r/ea5d25/32.png) [@RezarSPER](https://forums.speedlife.net/u/RezarSPER)\
**Post date:** [November 14, 2004, 5:02pm UTC](https://forums.speedlife.net/t/anyone-have-a-pulley-puller/170377/4 "2004-11-14T17:02:28Z")

</div>

dont they rent a few different types of pullers. I had trouble with the 3 arm puller. They come with a pointed tip. I grinded it off and drilled into the middle. It gripped a whole lot better. They never said anything to me about it.