# Anyone in blasdell have a breaker bar?
**URL:** https://forums.speedlife.net/t/anyone-in-blasdell-have-a-breaker-bar/217369
**Category:** NYSpeed Automotive
**Created:** [October 11, 2011, 1:10pm UTC](https://forums.speedlife.net/t/anyone-in-blasdell-have-a-breaker-bar/217369 "2011-10-11T13:10:26Z")
**Posts on this page:** 13
**Page:** 1
### Author:  [@robftw](https://forums.speedlife.net/u/robftw)
#### Post date: [October 11, 2011, 1:10pm UTC](https://forums.speedlife.net/t/anyone-in-blasdell-have-a-breaker-bar/217369/1 "2011-10-11T13:10:26Z")
Im trying to get the lug nuts off this rx7, i soaked them with penetrating fluid overnight. Tried to get them off this morning, bent my tire iron.
After that i sprayed them every hour or so with more penetrating fluid, for about… 6 hours now
Tried it again, bent tire iron even more. I don’t want to go all the way out to autozone on camp to get rent a breaker bar and then return it before they close.
I just need the lugs loosened
---
### Author:  [@travisn](https://forums.speedlife.net/u/travisn)
#### Post date: [October 11, 2011, 1:18pm UTC](https://forums.speedlife.net/t/anyone-in-blasdell-have-a-breaker-bar/217369/2 "2011-10-11T13:18:47Z")
drive to a shop and ask for help quick?
---
### Author:  [@TrueBlue](https://forums.speedlife.net/u/TrueBlue)
#### Post date: [October 11, 2011, 1:21pm UTC](https://forums.speedlife.net/t/anyone-in-blasdell-have-a-breaker-bar/217369/3 "2011-10-11T13:21:26Z")
Grab a 2’ x 2" steel pipe from Lowes, use over a 1/2" drive ratchet with an impact socket. Careful as you’ll imply a lot of torque with very minimal effort.
---
### Author:  [@Norb\_O](https://forums.speedlife.net/u/Norb_O)
#### Post date: [October 11, 2011, 1:29pm UTC](https://forums.speedlife.net/t/anyone-in-blasdell-have-a-breaker-bar/217369/4 "2011-10-11T13:29:38Z")
i was gonna say, doesn’t everyone have random pipe laying around?
---
### Author:  [@Minglor](https://forums.speedlife.net/u/Minglor)
#### Post date: [October 11, 2011, 1:44pm UTC](https://forums.speedlife.net/t/anyone-in-blasdell-have-a-breaker-bar/217369/5 "2011-10-11T13:44:28Z")
Well. I’m not in blasdell
---
### Author:  [@Jam](https://forums.speedlife.net/u/Jam)
#### Post date: [October 11, 2011, 2:38pm UTC](https://forums.speedlife.net/t/anyone-in-blasdell-have-a-breaker-bar/217369/6 "2011-10-11T14:38:13Z")
> [@TrueBlue](#):
>
> Grab a 2’ x 2" steel pipe from Lowes, use over a 1/2" drive ratchet with an impact socket. Careful as you’ll imply a lot of torque with very minimal effort.
This
---
### Author:  [@Deathproof](https://forums.speedlife.net/u/Deathproof)
#### Post date: [October 11, 2011, 2:50pm UTC](https://forums.speedlife.net/t/anyone-in-blasdell-have-a-breaker-bar/217369/7 "2011-10-11T14:50:13Z")
My dad has a breaker bar and a four foot pipe at his house in blasdell. I was just there, bummer. The soonest I could meet you there is Friday though.
---
### Author:  [@JayS](https://forums.speedlife.net/u/JayS)
#### Post date: [October 11, 2011, 3:10pm UTC](https://forums.speedlife.net/t/anyone-in-blasdell-have-a-breaker-bar/217369/8 "2011-10-11T15:10:31Z")
Some things are worth buying if you’re going to work on cars.
[http://www.sears.com/craftsman-1-2-in-dr-18-in-flex-handle/p-00944202000P](http://www.sears.com/craftsman-1-2-in-dr-18-in-flex-handle/p-00944202000P)
-
2’ piece of iron pipe. Probably the most used tool in my garage.
---
### Author:  [@JCuz](https://forums.speedlife.net/u/JCuz)
#### Post date: [October 11, 2011, 3:51pm UTC](https://forums.speedlife.net/t/anyone-in-blasdell-have-a-breaker-bar/217369/9 "2011-10-11T15:51:31Z")
> [@96V6Bird](#):
>
> i was gonna say, doesn’t everyone have random pipe laying around?
Haha, use anything you can find
---
### Author:  [@robftw](https://forums.speedlife.net/u/robftw)
#### Post date: [October 11, 2011, 11:51pm UTC](https://forums.speedlife.net/t/anyone-in-blasdell-have-a-breaker-bar/217369/10 "2011-10-11T23:51:09Z")
A friend stopped by and helped me out, even with a 2.5’ breaker bar it wouldnt come off, had to use a torch… FML
Atleast theyre off now
---
### Author:  [@SnowboardinWNY](https://forums.speedlife.net/u/SnowboardinWNY)
#### Post date: [October 12, 2011, 1:09am UTC](https://forums.speedlife.net/t/anyone-in-blasdell-have-a-breaker-bar/217369/11 "2011-10-12T01:09:48Z")
I love my breaker bar + steel pipe. Torches are nice to…
---
### Author:  [@Mike93](https://forums.speedlife.net/u/Mike93)
#### Post date: [October 12, 2011, 5:54am UTC](https://forums.speedlife.net/t/anyone-in-blasdell-have-a-breaker-bar/217369/12 "2011-10-12T05:54:41Z")
Floor jack handles work great as well! 4’ of leverage:tup:
---
### Author:  [@jay\_g](https://forums.speedlife.net/u/jay_g)
#### Post date: [October 12, 2011, 7:19am UTC](https://forums.speedlife.net/t/anyone-in-blasdell-have-a-breaker-bar/217369/13 "2011-10-12T07:19:01Z")
In a bind I have used a shovel. The handle opening is big enough to get around the ratchet plus its like 4ft long.