# Anyone know where Jim's steak out Gets the SS sheeting in their kitchens?4X8 sheet

**URL:** https://forums.speedlife.net/t/anyone-know-where-jims-steak-out-gets-the-ss-sheeting-in-their-kitchens-4x8-sheet/27602
**Category:** NYSpeed Off Topic
**Created:** [April 13, 2007, 3:48pm UTC](https://forums.speedlife.net/t/anyone-know-where-jims-steak-out-gets-the-ss-sheeting-in-their-kitchens-4x8-sheet/27602 "2007-04-13T15:48:05Z")
**Posts on this page:** 1
**Showing post:** 15

<div class="post-metadata">

### Author: ![newman](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/newman/32/7569_2.png) [@newman](https://forums.speedlife.net/u/newman)
#### Post date: [April 14, 2007, 5:01am UTC](https://forums.speedlife.net/t/anyone-know-where-jims-steak-out-gets-the-ss-sheeting-in-their-kitchens-4x8-sheet/27602/15 "2007-04-14T05:01:31Z")

</div>

[quote=“misteroman$$$,post:12,topic:27602"”]

I wasn’t worried too much about the fire proof,I just thought it would look nice and be easily cleanable.  
D

[/quote]

DEPENDING ON THE AMOUNT OF AREA YOU HAVE TO COVER, THIS ENDEAVOR COULD BE EXPENSIVE AS FUCK.

ALSO, AFTER WORKING IN A RESTAURANT FOR 4 YEARS, I THINK DIAMOND PLATE WOULD BE A BITCH TO GET FRYER GREASE OFF OF UNLESS IT WAS CLEANED THOROUGHLY EVERY NIGHT…

BUT ANYWAY, YOU CAN ORDER IT THROUGH RYERSON, I MIGHT BE ABLE TO GET YOU A PRETTY SWEET PRICE ON IT. HOWEVER, I WOULD GO WITH RAISED TREAD ALUMINUM (DIAMOND PLATE PATTERN) THE MINIMUM THICKNESS IS .100 AND THE MINIMUM SHEET SIZE IS 48 X 96, BUT I CAN GET UP TO 60 X 192

A 4X8 SHEET WEIGHS 50.24 LBS

IF YOU ACTUALLY WANT TO GO WITH STAINLESS DIAMOND PLATE (WHICH I DON’T RECOMMEND) I CAN GET 36 INCH WIDE PLATES, BUT 1/8 THICK…

KEEP IN MIND THAT A ENOUGH TO COVER THE SAME 4X8 AREA AS THE ALUMINUM ABOVE WOULD WEIGH 196.8LBS…

ALUMINUM WILL PROBABLY BE CHEAPER AS WELL.

I CAN PROBABLY BEAT MCMASTER’S PRICES BY 20-30%, BUT FOR EXAMPLE, CHECK OUT PART NUMBER **6245T22** ON [WWW.MCMASTER.COM](http://WWW.MCMASTER.COM)

YEAH, IT’S $487.09 A SHEET. (.125" X 48" X 96")

A .12 X 3 X 8 SHEET OF **NON DIAMOND PLATE** 304 IS $613.62

OBVIOUSLY MCMASTER STUFF IS OVERPRICED, BUT IT’S A GOOD COMPARISON.

THIS IS ALL ASSUMING THAT DIAMOND PLATE IS THE LOOK YOU’RE GOING FOR.

---

_[View the full topic](https://forums.speedlife.net/t/anyone-know-where-jims-steak-out-gets-the-ss-sheeting-in-their-kitchens-4x8-sheet/27602)._