# Anyone who knows Solidworks..... **URL:** \ **Category:** NYSpeed Off Topic\ **Created:** [October 10, 2005, 12:48pm UTC](https://forums.speedlife.net/t/anyone-who-knows-solidworks/3249 "2005-10-10T12:48:32Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![Tkklemann](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/tkklemann/32/7298_2.png) [@Tkklemann](https://forums.speedlife.net/u/Tkklemann)\ **Post date:** [October 10, 2005, 12:48pm UTC](https://forums.speedlife.net/t/anyone-who-knows-solidworks/3249/1 "2005-10-10T12:48:32Z")
You should call me to talk… It involves an opportunity at SSBC… (716) 407-0154… ---
**Author:** ![supry](https://avatars.discourse-cdn.com/v4/letter/s/ce73a5/32.png) [@supry](https://forums.speedlife.net/u/supry)\ **Post date:** [October 10, 2005, 4:23pm UTC](https://forums.speedlife.net/t/anyone-who-knows-solidworks/3249/2 "2005-10-10T16:23:36Z")
Dammit, if only I stayed in school another 2 years. ---
**Author:** ![Tkklemann](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/tkklemann/32/7298_2.png) [@Tkklemann](https://forums.speedlife.net/u/Tkklemann)\ **Post date:** [October 10, 2005, 4:28pm UTC](https://forums.speedlife.net/t/anyone-who-knows-solidworks/3249/3 "2005-10-10T16:28:47Z")
My appologies for being alittle vague in this post, I just don’t want to get 4,000 calls on my voicemail at work from people who “think” they know solidworks… Maybe I am just to accustomed to the “Barf” network… We have an opportunity to bring someone aboard to do lots of solidworks work for us, and it would be awful nice to get some young talent in there who is a car nut as well… ---
**Author:** ![vq30de](https://avatars.discourse-cdn.com/v4/letter/v/9dc877/32.png) [@vq30de](https://forums.speedlife.net/u/vq30de)\ **Post date:** [October 10, 2005, 4:44pm UTC](https://forums.speedlife.net/t/anyone-who-knows-solidworks/3249/4 "2005-10-10T16:44:26Z")
I have some experience with it, not nearly enough for what youre looking for. Good luck… ---
**Author:** ![chino](https://avatars.discourse-cdn.com/v4/letter/c/bcef8e/32.png) [@chino](https://forums.speedlife.net/u/chino)\ **Post date:** [October 10, 2005, 5:03pm UTC](https://forums.speedlife.net/t/anyone-who-knows-solidworks/3249/5 "2005-10-10T17:03:40Z")
i know how to run solidworks license servers, and how to install it, is that good enough? 😛 ---
**Author:** ![Tkklemann](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/tkklemann/32/7298_2.png) [@Tkklemann](https://forums.speedlife.net/u/Tkklemann)\ **Post date:** [October 10, 2005, 5:08pm UTC](https://forums.speedlife.net/t/anyone-who-knows-solidworks/3249/6 "2005-10-10T17:08:14Z")
> [@chino](#): > > i know how to run solidworks license servers, and how to install it, is that good enough? 😛 Can you aimlessly bitch and moan about how my EVO is faster than 95% of the V8 cars in our parking lot, and try to explain to me how terblows make it unfair for V8’s? Can you put on horse blinders and hate me only because I drive a car with less than 8 cylinders? If you can do that, you would fit right in… Oh yeah, alittle drafting experience would help… ---
**Author:** ![funkylemons](https://avatars.discourse-cdn.com/v4/letter/f/3ec8ea/32.png) [@funkylemons](https://forums.speedlife.net/u/funkylemons)\ **Post date:** [October 10, 2005, 5:41pm UTC](https://forums.speedlife.net/t/anyone-who-knows-solidworks/3249/7 "2005-10-10T17:41:43Z")
I have a friend… that is soon to graduate w/ a mechanical engineering degree… he is taking his solid works class now and already did the whole book… and hes been working /w cars for years now… its his last year of college in CNY… I don’t have your cell… ---
**Author:** ![supry](https://avatars.discourse-cdn.com/v4/letter/s/ce73a5/32.png) [@supry](https://forums.speedlife.net/u/supry)\ **Post date:** [October 10, 2005, 7:23pm UTC](https://forums.speedlife.net/t/anyone-who-knows-solidworks/3249/8 "2005-10-10T19:23:05Z")
I do know a few people who would be interested and either have degrees or will soon have degrees from RIT. They’ve spent a number of years on the RIT Mini-Baja team designing and building their own off-road race car for SAE. We actually designed and machined our own calipers and rotors for the car. [http://www.rit.edu/~bajawww/home/](http://www.rit.edu/%7Ebajawww/home/) I’ll let some people know ---
**Author:** ![catalyst](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/catalyst/32/7279_2.png) [@catalyst](https://forums.speedlife.net/u/catalyst)\ **Post date:** [October 10, 2005, 7:26pm UTC](https://forums.speedlife.net/t/anyone-who-knows-solidworks/3249/9 "2005-10-10T19:26:29Z")
How much compensation is SSBC offering? ---
**Author:** ![MaximaSE98](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/maximase98/32/7600_2.png) [@MaximaSE98](https://forums.speedlife.net/u/MaximaSE98)\ **Post date:** [October 10, 2005, 7:40pm UTC](https://forums.speedlife.net/t/anyone-who-knows-solidworks/3249/10 "2005-10-10T19:40:05Z")
tom ill send u my resume tomorrow ---
**Author:** ![Tkklemann](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/tkklemann/32/7298_2.png) [@Tkklemann](https://forums.speedlife.net/u/Tkklemann)\ **Post date:** [October 11, 2005, 5:09am UTC](https://forums.speedlife.net/t/anyone-who-knows-solidworks/3249/11 "2005-10-11T05:09:02Z")
> [@catalyst](#): > > How much compensation is SSBC offering? That is something for the SSBC wanna-be employee and our HR department to discuss. ---
**Author:** ![catalyst](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/catalyst/32/7279_2.png) [@catalyst](https://forums.speedlife.net/u/catalyst)\ **Post date:** [October 11, 2005, 5:20am UTC](https://forums.speedlife.net/t/anyone-who-knows-solidworks/3249/12 "2005-10-11T05:20:15Z")
I was just wondering if you are talking engineering money or drafting money. :shrug: ---
**Author:** ![walter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/walter/32/7202_2.png) [@walter](https://forums.speedlife.net/u/walter)\ **Post date:** [October 11, 2005, 8:48am UTC](https://forums.speedlife.net/t/anyone-who-knows-solidworks/3249/13 "2005-10-11T08:48:12Z")
I do :o It’s open right now. ---
**Author:** ![walter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/walter/32/7202_2.png) [@walter](https://forums.speedlife.net/u/walter)\ **Post date:** [October 11, 2005, 8:50am UTC](https://forums.speedlife.net/t/anyone-who-knows-solidworks/3249/14 "2005-10-11T08:50:07Z")
> [@catalyst](#): > > I was just wondering if you are talking engineering money or drafting money. :shrug: If you’re going to be a CAD bitch, it’s gonna be drafting money. There’s a reason Engineer’s have drafters :-p They get paid too much to spend all of their time in SolidWorks ---
**Author:** ![Tkklemann](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/tkklemann/32/7298_2.png) [@Tkklemann](https://forums.speedlife.net/u/Tkklemann)\ **Post date:** [October 11, 2005, 8:52am UTC](https://forums.speedlife.net/t/anyone-who-knows-solidworks/3249/15 "2005-10-11T08:52:12Z")
> [@walter](#): > > If you’re going to be a CAD bitch, it’s gonna be drafting money. > > There’s a reason Engineer’s have drafters :-p They get paid too much to spend all of their time in SolidWorks You are correct. ---
**Author:** ![Dr.Stevil](https://avatars.discourse-cdn.com/v4/letter/d/da6949/32.png) [@Dr.Stevil](https://forums.speedlife.net/u/Dr.Stevil)\ **Post date:** [October 11, 2005, 8:59am UTC](https://forums.speedlife.net/t/anyone-who-knows-solidworks/3249/16 "2005-10-11T08:59:53Z")
only solidworks work huh? go to UniGraphics 😃 😛 ---
**Author:** ![newman](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/newman/32/7569_2.png) [@newman](https://forums.speedlife.net/u/newman)\ **Post date:** [October 11, 2005, 9:11am UTC](https://forums.speedlife.net/t/anyone-who-knows-solidworks/3249/17 "2005-10-11T09:11:34Z")
if you want to run autodesk inventor, i am pretty good at it… i use it 40hrs/wk. ![http://i23.photobucket.com/albums/b370/ctnewman4/CR1.jpg](http://i23.photobucket.com/albums/b370/ctnewman4/CR1.jpg) ---
**Author:** ![MaximaSE98](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/maximase98/32/7600_2.png) [@MaximaSE98](https://forums.speedlife.net/u/MaximaSE98)\ **Post date:** [October 11, 2005, 9:41am UTC](https://forums.speedlife.net/t/anyone-who-knows-solidworks/3249/18 "2005-10-11T09:41:37Z")
I \<3 INVENTOR…IMO \> SOLIDWORKS…but that one mans insight ---
**Author:** ![Jack](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jack/32/7613_2.png) [@Jack](https://forums.speedlife.net/u/Jack)\ **Post date:** [October 11, 2005, 9:48am UTC](https://forums.speedlife.net/t/anyone-who-knows-solidworks/3249/19 "2005-10-11T09:48:36Z")
newman - the glass doors in the top right of the cabinet… their handles are not equally spaced from the edge of the glass. Sorry dude. ---
**Author:** ![newman](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/newman/32/7569_2.png) [@newman](https://forums.speedlife.net/u/newman)\ **Post date:** [October 11, 2005, 10:03am UTC](https://forums.speedlife.net/t/anyone-who-knows-solidworks/3249/20 "2005-10-11T10:03:40Z")
> [@Jack](#): > > newman - the glass doors in the top right of the cabinet… their handles are not equally spaced from the edge of the glass. Sorry dude. that whole edge of the room was not being remodeled, so i eyballed alot of stuff. I was getting sick of walking down to the room and measuring. The handles are probably off because they are an arrayed element that wasnt constrained in the x axis. I started having to delete my constraints because they were slowing up my machine too much. [Next page](https://forums.speedlife.net/t/anyone-who-knows-solidworks/3249.md?page=2)