# Anyone work on Mitsubishi Galants?

**URL:** https://forums.speedlife.net/t/anyone-work-on-mitsubishi-galants/12354
**Category:** NYSpeed Automotive
**Created:** [May 22, 2006, 7:44am UTC](https://forums.speedlife.net/t/anyone-work-on-mitsubishi-galants/12354 "2006-05-22T07:44:29Z")
**Posts on this page:** 6
**Page:** 1

<div class="post-metadata">

### Author: ![soigoslo2.0](https://avatars.discourse-cdn.com/v4/letter/s/35a633/32.png) [@soigoslo2.0](https://forums.speedlife.net/u/soigoslo2.0)
#### Post date: [May 22, 2006, 7:44am UTC](https://forums.speedlife.net/t/anyone-work-on-mitsubishi-galants/12354/1 "2006-05-22T07:44:29Z")

</div>

My womans Check Engine light is on and is a CODE PO335 (Crank Position Sensor).

She doesnt have alot of money (Just changed jobs) so I am trying to find someone or somewhere that can check it out for a good price.

Anyone?

I could do it but I dont wanna mess with the timing belt.

---

<div class="post-metadata">

### Author: ![newman](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/newman/32/7569_2.png) [@newman](https://forums.speedlife.net/u/newman)
#### Post date: [May 22, 2006, 7:50am UTC](https://forums.speedlife.net/t/anyone-work-on-mitsubishi-galants/12354/2 "2006-05-22T07:50:06Z")

</div>

you could check continuity on the harness. then check for voltages at the ecu, etc without removing anything associated with the timing belt. idk where the pickup is for that motor tho.

---

<div class="post-metadata">

### Author: ![soigoslo2.0](https://avatars.discourse-cdn.com/v4/letter/s/35a633/32.png) [@soigoslo2.0](https://forums.speedlife.net/u/soigoslo2.0)
#### Post date: [May 22, 2006, 8:48am UTC](https://forums.speedlife.net/t/anyone-work-on-mitsubishi-galants/12354/3 "2006-05-22T08:48:44Z")

</div>

Thanks Newman!

---

<div class="post-metadata">

### Author: ![newman](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/newman/32/7569_2.png) [@newman](https://forums.speedlife.net/u/newman)
#### Post date: [May 22, 2006, 8:50am UTC](https://forums.speedlife.net/t/anyone-work-on-mitsubishi-galants/12354/4 "2006-05-22T08:50:06Z")

</div>

just check the service manual for ECU pinouts and wiring diagrams…

---

<div class="post-metadata">

### Author: ![91CRXSI](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/91crxsi/32/7247_2.png) [@91CRXSI](https://forums.speedlife.net/u/91CRXSI)
#### Post date: [May 22, 2006, 9:55am UTC](https://forums.speedlife.net/t/anyone-work-on-mitsubishi-galants/12354/5 "2006-05-22T09:55:58Z")

</div>

the crank angle sensor on my car ( honda ) is in the dizzy

does the car run fine or is it running shitty?

---

<div class="post-metadata">

### Author: ![soigoslo2.0](https://avatars.discourse-cdn.com/v4/letter/s/35a633/32.png) [@soigoslo2.0](https://forums.speedlife.net/u/soigoslo2.0)
#### Post date: [May 22, 2006, 10:18am UTC](https://forums.speedlife.net/t/anyone-work-on-mitsubishi-galants/12354/6 "2006-05-22T10:18:23Z")

</div>

Runs fine, I would like to see if someone can come look at it or If anyone works at a shop I can bring it into. Just dont wanna have her break down.