# Arrow Enterprises-Current Project Post
**URL:** https://forums.speedlife.net/t/arrow-enterprises-current-project-post/226326
**Category:** NYSpeed Off Topic
**Created:** [October 2, 2012, 4:53pm UTC](https://forums.speedlife.net/t/arrow-enterprises-current-project-post/226326 "2012-10-02T16:53:17Z")
**Posts on this page:** 20
**Page:** 5
### Author:  [@slo\_ride](https://forums.speedlife.net/u/slo_ride)
#### Post date: [January 11, 2013, 7:05pm UTC](https://forums.speedlife.net/t/arrow-enterprises-current-project-post/226326/81 "2013-01-11T19:05:28Z")
i tried some of the stain and coat stuff and it was a major mistake…much better results from staining and finishing separately…i just feel like i have to sand much more heavily
---
### Author:  [@1QIKZ](https://forums.speedlife.net/u/1QIKZ)
#### Post date: [January 11, 2013, 7:09pm UTC](https://forums.speedlife.net/t/arrow-enterprises-current-project-post/226326/82 "2013-01-11T19:09:50Z")
Too fine a sandpaper on certain species “closes” the grain and makes stain harder to penetrate and even out. Magnalac is a self sealing lacquer so the first coat gets sanded as if it were a sanding sealer. Second coat typically yields orgasmic results.
---
### Author:  [@Spam16v](https://forums.speedlife.net/u/Spam16v)
#### Post date: [January 12, 2013, 8:09am UTC](https://forums.speedlife.net/t/arrow-enterprises-current-project-post/226326/83 "2013-01-12T08:09:16Z")
> [@1QIKZ](#):
>
> Thanks. She looked like McCauley Culkin from Home Alone with her hands on her cheeks and wide eyed. She was pretty thrilled…which is what I was going for.
That’s it sweet thang, smile like a doughnut.
---
### Author:  [@1QIKZ](https://forums.speedlife.net/u/1QIKZ)
#### Post date: [January 21, 2013, 6:39pm UTC](https://forums.speedlife.net/t/arrow-enterprises-current-project-post/226326/84 "2013-01-21T18:39:28Z")
Installed the glass and the LED lighting. Used a Sylvannia LED setup with remote control allowing her to vary from about 20 different colors and lighting effects. Enjoy.
---
### Author:  [@ProgRocker](https://forums.speedlife.net/u/ProgRocker)
#### Post date: [January 22, 2013, 9:36am UTC](https://forums.speedlife.net/t/arrow-enterprises-current-project-post/226326/85 "2013-01-22T09:36:04Z")
Looks awesome, great job as always.
---
### Author:  [@LUKE\_L](https://forums.speedlife.net/u/LUKE_L)
#### Post date: [January 22, 2013, 10:13am UTC](https://forums.speedlife.net/t/arrow-enterprises-current-project-post/226326/86 "2013-01-22T10:13:35Z")
Came in to see your updates…I think photobucket is doing something wierd at the moment. Some pics did not show up…refreshed and then different ones appeared.
---
### Author:  [@1QIKZ](https://forums.speedlife.net/u/1QIKZ)
#### Post date: [January 23, 2013, 4:14pm UTC](https://forums.speedlife.net/t/arrow-enterprises-current-project-post/226326/87 "2013-01-23T16:14:38Z")
Came in to see your updates…I think photobucket is doing something wierd at the moment. Some pics did not show up…refreshed and then different ones appeared.[/QUOTE]
Yeah, sorry about that. Thought I was simplifying my life on my photobucket account and just made it more difficult. Should be back to normal. Sorry.
:crap:
---
### Author:  [@Blue\_Eyed\_Devil](https://forums.speedlife.net/u/Blue_Eyed_Devil)
#### Post date: [January 23, 2013, 5:29pm UTC](https://forums.speedlife.net/t/arrow-enterprises-current-project-post/226326/88 "2013-01-23T17:29:43Z")
Nice work. Who cut your glass?
---
### Author:  [@1QIKZ](https://forums.speedlife.net/u/1QIKZ)
#### Post date: [January 23, 2013, 5:52pm UTC](https://forums.speedlife.net/t/arrow-enterprises-current-project-post/226326/89 "2013-01-23T17:52:03Z")
> [@Blue Eyed Devil](#):
>
> Nice work. Who cut your glass?
Hamburg Glass. Sorry to waste your time. How was I to know you could score / snap plate glass on a radius? Learn something new everyday.
:dunno:
---
### Author:  [@Blue\_Eyed\_Devil](https://forums.speedlife.net/u/Blue_Eyed_Devil)
#### Post date: [January 23, 2013, 5:54pm UTC](https://forums.speedlife.net/t/arrow-enterprises-current-project-post/226326/90 "2013-01-23T17:54:45Z")
No worries at all.
Edit: just keep in mind I can cut anything for you in any shape. 🙂
---
### Author:  [@Onyx\_Z32](https://forums.speedlife.net/u/Onyx_Z32)
#### Post date: [January 23, 2013, 6:41pm UTC](https://forums.speedlife.net/t/arrow-enterprises-current-project-post/226326/91 "2013-01-23T18:41:50Z")
> [@1QIKZ](#):
>
> How was I to know you could score / snap plate glass on a radius?
> [@Blue Eyed Devil](#):
>
> keep in mind I can cut anything for you in any shape. 🙂
:highfive:
---
### Author:  [@1QIKZ](https://forums.speedlife.net/u/1QIKZ)
#### Post date: [January 23, 2013, 6:47pm UTC](https://forums.speedlife.net/t/arrow-enterprises-current-project-post/226326/92 "2013-01-23T18:47:43Z")
Look here Mr. I’m gonna jump on your post infrequently…
---
### Author:  [@1QIKZ](https://forums.speedlife.net/u/1QIKZ)
#### Post date: [January 29, 2013, 8:13am UTC](https://forums.speedlife.net/t/arrow-enterprises-current-project-post/226326/93 "2013-01-29T08:13:33Z")
**General / Master / Half Bath Remodel**
Just completed this last week at the end of the cold snap. Customer wanted their master / general bath updated with new fixtures, cabinetry, tile, and paint. The half bath just received a coat of paint, new cabinet and countertop, and toilet. Removed original wall accessory fixtures, medicine cabinet, and old recessed cans. Patched and skim coated those area to blend.
**_Features:_**
Kohler Devonshire whirpool tub with matching Devonshire toilets and sinks.
Oil rubbed bronze finish on all faucets and accessories.
Wilsonart HD laminate countertops with beveled edges.
Comfort height (kitchen height) cabinets at both.
Existing doors and trim remained. New recessed lighting with (2) 4" halogen recessed lights over the master sink area.
New high capacity exhaust fan / light at shower. (was horribly dark)
---
### Author:  [@Beck](https://forums.speedlife.net/u/Beck)
#### Post date: [January 29, 2013, 8:38am UTC](https://forums.speedlife.net/t/arrow-enterprises-current-project-post/226326/94 "2013-01-29T08:38:47Z")
:tup: I have that same tub and LOVE it.
---
### Author:  [@LUKE\_L](https://forums.speedlife.net/u/LUKE_L)
#### Post date: [January 29, 2013, 8:58am UTC](https://forums.speedlife.net/t/arrow-enterprises-current-project-post/226326/95 "2013-01-29T08:58:37Z")
Very nice!
What is your current backlog? I have a bunch of “ideas” for my house.
---
### Author:  [@ProgRocker](https://forums.speedlife.net/u/ProgRocker)
#### Post date: [January 29, 2013, 9:15am UTC](https://forums.speedlife.net/t/arrow-enterprises-current-project-post/226326/96 "2013-01-29T09:15:19Z")
Multi day project? I know you won’t say but I’d love to know the ~cost of labor/job for this.
Would like to retile the surround and replace fixtures/plumbing on my bathroom. Just wonder at what price range we’re looking at
---
### Author:  [@1QIKZ](https://forums.speedlife.net/u/1QIKZ)
#### Post date: [January 29, 2013, 9:39am UTC](https://forums.speedlife.net/t/arrow-enterprises-current-project-post/226326/97 "2013-01-29T09:39:32Z")
> [@ProgRocker](#):
>
> Multi day project? I know you won’t say but I’d love to know the ~cost of labor/job for this.
>
> Would like to retile the surround and replace fixtures/plumbing on my bathroom. Just wonder at what price range we’re looking at
As is usual, every project is unique. This one was almost exactly (8) days. I can certainly quote anything you’d like.
> [@LUKE\_L](#):
>
> Very nice!
>
> What is your current backlog? I have a bunch of “ideas” for my house.
I’m fairly open right now, but I know the home show is going to change that. I have at least three baths that are waiting on decisions but they all look promising. If you have thoughts, now’s the time to act on them. Just let me know. Thanks.
---
### Author:  [@Dekar12](https://forums.speedlife.net/u/Dekar12)
#### Post date: [January 29, 2013, 10:06am UTC](https://forums.speedlife.net/t/arrow-enterprises-current-project-post/226326/98 "2013-01-29T10:06:34Z")
Really like those fixtures with the other colors in the room. Looks really awesome all together!
---
### Author:  [@1QIKZ](https://forums.speedlife.net/u/1QIKZ)
#### Post date: [January 29, 2013, 10:24am UTC](https://forums.speedlife.net/t/arrow-enterprises-current-project-post/226326/99 "2013-01-29T10:24:53Z")
As you can see in many of my posts, people are defaulting to the warm earth tones and darker colored woods. I am working with a customer right now who is leaning in the modern, white / grey look and it should be an interesting one. We would be combing a dressing room and general / master bath in a condominium. The shower looks like it’s also going to be very custom with an open feeling with glass. I’m kind of looking forward to this since we’ve been doing some pretty mundane projects these past few months. More to come.
---
### Author:  [@00zx6r](https://forums.speedlife.net/u/00zx6r)
#### Post date: [January 30, 2013, 5:24am UTC](https://forums.speedlife.net/t/arrow-enterprises-current-project-post/226326/100 "2013-01-30T05:24:53Z")
awesome work… i know the wife wants to get a few new windows installed at the house. When is the home and garden show??
[Previous page](https://forums.speedlife.net/t/arrow-enterprises-current-project-post/226326.md?page=4)
[Next page](https://forums.speedlife.net/t/arrow-enterprises-current-project-post/226326.md?page=6)