# ASAP! broken GSR/ITR trans case

**URL:** <https://forums.speedlife.net/t/asap-broken-gsr-itr-trans-case/75308>\
**Category:** Classifieds\
**Created:** [October 24, 2009, 8:19pm UTC](https://forums.speedlife.net/t/asap-broken-gsr-itr-trans-case/75308 "2009-10-24T20:19:18Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![stmotorsports](https://avatars.discourse-cdn.com/v4/letter/s/bb73d2/32.png) [@stmotorsports](https://forums.speedlife.net/u/stmotorsports)\
**Post date:** [October 24, 2009, 8:19pm UTC](https://forums.speedlife.net/t/asap-broken-gsr-itr-trans-case/75308/1 "2009-10-24T20:19:18Z")

</div>

need one that I can cut access holes for measuring internal tolerances once the case is assembled, etc

lmk, can pick up asap

---

<div class="post-metadata">

**Author:** ![stmotorsports](https://avatars.discourse-cdn.com/v4/letter/s/bb73d2/32.png) [@stmotorsports](https://forums.speedlife.net/u/stmotorsports)\
**Post date:** [October 25, 2009, 8:01am UTC](https://forums.speedlife.net/t/asap-broken-gsr-itr-trans-case/75308/2 "2009-10-25T08:01:58Z")

</div>

immediately! immediately!

lol

---

<div class="post-metadata">

**Author:** ![Saxon](https://avatars.discourse-cdn.com/v4/letter/s/59ef9b/32.png) [@Saxon](https://forums.speedlife.net/u/Saxon)\
**Post date:** [October 25, 2009, 8:43am UTC](https://forums.speedlife.net/t/asap-broken-gsr-itr-trans-case/75308/3 "2009-10-25T08:43:44Z")

</div>

so what are you going to do? i have a good case, do you plan on measuring clearances with one case and transferring internals to another case?

---

<div class="post-metadata">

**Author:** ![stmotorsports](https://avatars.discourse-cdn.com/v4/letter/s/bb73d2/32.png) [@stmotorsports](https://forums.speedlife.net/u/stmotorsports)\
**Post date:** [October 25, 2009, 10:31am UTC](https://forums.speedlife.net/t/asap-broken-gsr-itr-trans-case/75308/4 "2009-10-25T10:31:29Z")

</div>

lol no, just want to experiment with different clearances and see how it affects tooth contact

I figured using a broken case with access holes cut would be way easier than fabbing up a monster jig to hold everything in place