# ATT. Keyboard Racers what Pittspeed Grudge Match are you most interested in Next Year
**URL:** https://forums.speedlife.net/t/att-keyboard-racers-what-pittspeed-grudge-match-are-you-most-interested-in-next-year/186509
**Category:** PittSpeed Off Topic
**Created:** [November 29, 2006, 10:02pm UTC](https://forums.speedlife.net/t/att-keyboard-racers-what-pittspeed-grudge-match-are-you-most-interested-in-next-year/186509 "2006-11-29T22:02:05Z")
**Posts on this page:** 20
**Page:** 8
### Author:  [@Orr89rocz](https://forums.speedlife.net/u/Orr89rocz)
#### Post date: [December 6, 2006, 9:12pm UTC](https://forums.speedlife.net/t/att-keyboard-racers-what-pittspeed-grudge-match-are-you-most-interested-in-next-year/186509/141 "2006-12-06T21:12:36Z")
> it was a golen engine built 383 w/ afr cnc’d lt4 heads and the lt4 intake manifold, 30 lb injectors, a pussy ass cam and it only put down 385rwhp, 412tq. with a better tune i think it might of been a much better car, plus that mid 12 slip was my first time ever on a track, and the last time for that car, it def had more in it
those heads are a good start and that shortblock aint bad either. golens current 480hp motor has a 236/244 cam…which is around what i’d run. thats some good numbers…but probly should have more in it. 500hp in a fbody should definately be trappin near 117-118 and go mid 11’s on tire.
what cam did it have in yours? i thought it was the cc306? which is kinda a mild cam for a 383
---
### Author:  [@Quik](https://forums.speedlife.net/u/Quik)
#### Post date: [December 7, 2006, 3:40am UTC](https://forums.speedlife.net/t/att-keyboard-racers-what-pittspeed-grudge-match-are-you-most-interested-in-next-year/186509/142 "2006-12-07T03:40:00Z")
> [@more xbox 360 rumors..](https://forums.speedlife.net/t/more-xbox-360-rumors/26171/10):
>
> Alright, not bench racing for somone else truck any more. Just a qoute from the owner when told about quicks truck. " I’ve seen him at the track. Its pretty freakin fast." Then I say, " I started talkin some smack to see if he’d race ya. You gonna crush him or what?" Then he says, “You kidding!? No problem. That shits over before it begun!”
heres the thing, dude seen what my old setup did. i have no plans of gong backwards in ET only forward a few seconds. so for the dude to run his mouth and have no idea what hte situation is just as lame as some other things. and heres anothe thing its sad when you need a power adder to be or hang with a NA motor
---
### Author:  [@SloWhite\_Z](https://forums.speedlife.net/u/SloWhite_Z)
#### Post date: [December 7, 2006, 4:01am UTC](https://forums.speedlife.net/t/att-keyboard-racers-what-pittspeed-grudge-match-are-you-most-interested-in-next-year/186509/143 "2006-12-07T04:01:06Z")
run what you brung no excuses
---
### Author:  [@Turbo\_Silverado](https://forums.speedlife.net/u/Turbo_Silverado)
#### Post date: [December 7, 2006, 4:48am UTC](https://forums.speedlife.net/t/att-keyboard-racers-what-pittspeed-grudge-match-are-you-most-interested-in-next-year/186509/144 "2006-12-07T04:48:34Z")
> [@OFFICIAL Buffalo Sabres Thread](https://forums.speedlife.net/t/official-buffalo-sabres-thread/25170/3648):
>
> run what you brung no excuses
💏
soo if i bring you can i run you?
---
### Author:  [@Swift](https://forums.speedlife.net/u/Swift)
#### Post date: [December 7, 2006, 6:19am UTC](https://forums.speedlife.net/t/att-keyboard-racers-what-pittspeed-grudge-match-are-you-most-interested-in-next-year/186509/145 "2006-12-07T06:19:00Z")
> [@3M clear bra](https://forums.speedlife.net/t/3m-clear-bra/26341/2):
>
> those heads are a good start and that shortblock aint bad either. golens current 480hp motor has a 236/244 cam…which is around what i’d run. thats some good numbers…but probly should have more in it. 500hp in a fbody should definately be trappin near 117-118 and go mid 11’s on tire.
>
> what cam did it have in yours? i thought it was the cc306? which is kinda a mild cam for a 383
yea, thats the cam it had, if teh motor was setup better and had a good tune, it would of put down more impressive numbers and ran better, and 500hp in an f-body is gonna be pretty damn fast man
---
### Author:  [@BlkP42E](https://forums.speedlife.net/u/BlkP42E)
#### Post date: [December 7, 2006, 6:40am UTC](https://forums.speedlife.net/t/att-keyboard-racers-what-pittspeed-grudge-match-are-you-most-interested-in-next-year/186509/146 "2006-12-07T06:40:05Z")
> [@STi shite fuel gauge or someone syphoning?](https://forums.speedlife.net/t/sti-shite-fuel-gauge-or-someone-syphoning/26345/2):
>
> its sad when you need a power adder to be or hang with a NA motor
here we go again
---
### Author:  [@Dominator](https://forums.speedlife.net/u/Dominator)
#### Post date: [December 7, 2006, 8:16am UTC](https://forums.speedlife.net/t/att-keyboard-racers-what-pittspeed-grudge-match-are-you-most-interested-in-next-year/186509/147 "2006-12-07T08:16:14Z")
> [@STi shite fuel gauge or someone syphoning?](https://forums.speedlife.net/t/sti-shite-fuel-gauge-or-someone-syphoning/26345/2):
>
> heres the thing, dude seen what my old setup did. i have no plans of gong backwards in ET only forward a few seconds. so for the dude to run his mouth and have no idea what hte situation is just as lame as some other things. and heres anothe thing its sad when you need a power adder to be or hang with a NA motor
He knows the new “combo”.
NA excludes NOS you know right? Anyhow, he doesn’t need a power adder to hang with an NA truck, you need a displacement increase to hang with a factory stock truck!
---
### Author:  [@Turbo\_Silverado](https://forums.speedlife.net/u/Turbo_Silverado)
#### Post date: [December 7, 2006, 8:23am UTC](https://forums.speedlife.net/t/att-keyboard-racers-what-pittspeed-grudge-match-are-you-most-interested-in-next-year/186509/148 "2006-12-07T08:23:46Z")
> [@FS:2 Skidoo's Sleds](https://forums.speedlife.net/t/fs-2-skidoos-sleds/25171/16):
>
> He knows the new “combo”.
>
> NA excludes NOS you know right? Anyhow, he doesn’t need a power adder to hang with an NA truck, you need a displacement increase to hang with a factory stock truck!
i can will bet my left nut u take that blower off, it wouldnt hang with quicks 6.0
---
### Author:  [@77rednecktruck](https://forums.speedlife.net/u/77rednecktruck)
#### Post date: [December 7, 2006, 8:30am UTC](https://forums.speedlife.net/t/att-keyboard-racers-what-pittspeed-grudge-match-are-you-most-interested-in-next-year/186509/149 "2006-12-07T08:30:02Z")
> [@Chicago cop BEATS Female bartender!](https://forums.speedlife.net/t/chicago-cop-beats-female-bartender/26300/46):
>
> i can will bet my left nut u take that blower off, it wouldnt hang with quicks 6.0
would you n/a bitches quit complaining about f/i people. You should have been smarter in the beginning and either built a motor for boost or bought an already boosted car/truck from factory. You sound like 2 year olds “but he has a blower”, STFU.
---
### Author:  [@T70\_Tsi](https://forums.speedlife.net/u/T70_Tsi)
#### Post date: [December 7, 2006, 8:30am UTC](https://forums.speedlife.net/t/att-keyboard-racers-what-pittspeed-grudge-match-are-you-most-interested-in-next-year/186509/150 "2006-12-07T08:30:57Z")
> [@STi shite fuel gauge or someone syphoning?](https://forums.speedlife.net/t/sti-shite-fuel-gauge-or-someone-syphoning/26345/2):
>
> heres the thing, dude seen what my old setup did. i have no plans of gong backwards in ET only forward a few seconds.
i wish i had the energy to dig up threads where you post mods dont’ equal power.
> [@quik](#):
>
> so for the dude to run his mouth and have no idea what hte situation is just as lame as some other things.
WHAT THE FUCK ARE YOU DOING? YOUVE NEVER SEEN HIS SHIT AND YOURE TALKING SHIT! what a moron.
---
### Author:  [@BlkP42E](https://forums.speedlife.net/u/BlkP42E)
#### Post date: [December 7, 2006, 8:31am UTC](https://forums.speedlife.net/t/att-keyboard-racers-what-pittspeed-grudge-match-are-you-most-interested-in-next-year/186509/151 "2006-12-07T08:31:21Z")
x2
---
### Author:  [@Dominator](https://forums.speedlife.net/u/Dominator)
#### Post date: [December 7, 2006, 8:34am UTC](https://forums.speedlife.net/t/att-keyboard-racers-what-pittspeed-grudge-match-are-you-most-interested-in-next-year/186509/152 "2006-12-07T08:34:50Z")
> [@Chicago cop BEATS Female bartender!](https://forums.speedlife.net/t/chicago-cop-beats-female-bartender/26300/46):
>
> i can will bet my left nut u take that blower off, it wouldnt hang with quicks 6.0
huh? :bowrofl:
Factory stock includes the blower. Quick can increase displacment with a bore and stroke change, and the lightening can increase “displacement” with a pulley change. So I bet the lightening will win if quick will race a domestic truck even though its supercharged, and maybe a full moon, and may be a leap year, and might be his time of the month, and his tune might almost be done, and he has the right gas, and he ate breakfast, and he has all the screws in he lisense plate, and none of the rubber has torn off any of his wipers, and his hair doesnt hurt, and his floor mat doesn’t get stuck under the gas pedal, and he didn’t forget to remove the fuel filling nozzle at the gas station and drive off with it still in his tank…
---
### Author:  [@burnyd](https://forums.speedlife.net/u/burnyd)
#### Post date: [December 7, 2006, 8:35am UTC](https://forums.speedlife.net/t/att-keyboard-racers-what-pittspeed-grudge-match-are-you-most-interested-in-next-year/186509/153 "2006-12-07T08:35:13Z")
:shakeshead:
---
### Author:  [@Turbo\_Silverado](https://forums.speedlife.net/u/Turbo_Silverado)
#### Post date: [December 7, 2006, 8:36am UTC](https://forums.speedlife.net/t/att-keyboard-racers-what-pittspeed-grudge-match-are-you-most-interested-in-next-year/186509/154 "2006-12-07T08:36:05Z")
> [@NYSpeed Track Day #1 - Friday June 15th, 2007](https://forums.speedlife.net/t/nyspeed-track-day-1-friday-june-15th-2007/26320/15):
>
> would you n/a bitches quit complaining about f/i people. You should have been smarter in the beginning and either built a motor for boost or bought an already boosted car/truck from factory. You sound like 2 year olds “but he has a blower”, STFU.
im not aruging about f/i, i dont mind it at all, if i had money id do a turbo or a nice s/c set up in a second, but i dont, i was just sayin that since quik started the he has a s/c on his car to keep up wiht n/a cars, then he said u need more cubes to keep up with f/i, im not taking any sides, if u notice what build im doing the car is going to able to run f/i if i ever go that route, soo stfu and read stupid old hick :idb:
---
### Author:  [@Turbo\_Silverado](https://forums.speedlife.net/u/Turbo_Silverado)
#### Post date: [December 7, 2006, 8:39am UTC](https://forums.speedlife.net/t/att-keyboard-racers-what-pittspeed-grudge-match-are-you-most-interested-in-next-year/186509/155 "2006-12-07T08:39:52Z")
> [@RANT re: Cops](https://forums.speedlife.net/t/rant-re-cops/26272/109):
>
> huh? :bowrofl:
>
> Factory stock includes the blower. Quick can increase displacment with a bore and stroke change, and the lightening can increase “displacement” with a pulley change. So I bet the lightening will win if quick will race a domestic truck even though its supercharged, and maybe a full moon, and may be a leap year, and might be his time of the month, and his tune might almost be done, and he has the right gas, and he ate breakfast, and he has all the screws in he lisense plate, and none of the rubber has torn off any of his wipers, and his hair doesnt hurt, and his floor mat doesn’t get stuck under the gas pedal, and he didn’t forget to remove the fuel filling nozzle at the gas station and drive off with it still in his tank…
first off, a pulley doesn not change displacment, the arrgument ppl bring forward is, say a cobra, has a 4.6, and the s/c is a 2.2 soo that then makes a 6.8 motor, but i dont really belive that theory tho. no body ever said changin a pulley will add displacemnt, mr. know it all u should konw that a pulley change will just spin the screws faster thats all. i never knew a change of pulley would add more cubes to a blower. Soo wait if u say that, then me puttin a smaller pulley on my cranks should increase my motors cubes?!?!? awesome :hsugh:
---
### Author:  [@eurodad](https://forums.speedlife.net/u/eurodad)
#### Post date: [December 7, 2006, 8:41am UTC](https://forums.speedlife.net/t/att-keyboard-racers-what-pittspeed-grudge-match-are-you-most-interested-in-next-year/186509/156 "2006-12-07T08:41:11Z")
all you guys spend way top much money to “try” and go fast.
---
### Author:  [@Turbo\_Silverado](https://forums.speedlife.net/u/Turbo_Silverado)
#### Post date: [December 7, 2006, 8:43am UTC](https://forums.speedlife.net/t/att-keyboard-racers-what-pittspeed-grudge-match-are-you-most-interested-in-next-year/186509/157 "2006-12-07T08:43:15Z")
> [@3M clear bra](https://forums.speedlife.net/t/3m-clear-bra/26341/8):
>
> all you guys spend way top much money to “try” and go fast.
just make some wings, and ill pay u for them
---
### Author:  [@T70\_Tsi](https://forums.speedlife.net/u/T70_Tsi)
#### Post date: [December 7, 2006, 8:45am UTC](https://forums.speedlife.net/t/att-keyboard-racers-what-pittspeed-grudge-match-are-you-most-interested-in-next-year/186509/158 "2006-12-07T08:45:46Z")
> [@Hottest Acura Ever?](https://forums.speedlife.net/t/hottest-acura-ever/26330/32):
>
> first off, a pulley doesn not change displacment, the arrgument ppl bring forward is, say a cobra, has a 4.6, and the s/c is a 2.2 soo that then makes a 6.8 motor, but i dont really belive that theory tho. no body ever said changin a pulley will add displacemnt, mr. know it all u should konw that a pulley change will just spin the screws faster thats all. i never knew a change of pulley would add more cubes to a blower. Soo wait if u say that, then me puttin a smaller pulley on my cranks should increase my motors cubes?!?!? awesome :hsugh:
um, static displacement does not change but “dynamic” displacement of the motor does change, for every 1atm of air inside the motor, displacement of the motor essentually doubles, everyone knows this.
---
### Author:  [@Dominator](https://forums.speedlife.net/u/Dominator)
#### Post date: [December 7, 2006, 9:00am UTC](https://forums.speedlife.net/t/att-keyboard-racers-what-pittspeed-grudge-match-are-you-most-interested-in-next-year/186509/159 "2006-12-07T09:00:37Z")
> [@Hottest Acura Ever?](https://forums.speedlife.net/t/hottest-acura-ever/26330/32):
>
> first off, a pulley doesn not change displacment, the arrgument ppl bring forward is, say a cobra, has a 4.6, and the s/c is a 2.2 soo that then makes a 6.8 motor, but i dont really belive that theory tho. no body ever said changin a pulley will add displacemnt, mr. know it all u should konw that a pulley change will just spin the screws faster thats all. i never knew a change of pulley would add more cubes to a blower. Soo wait if u say that, then me puttin a smaller pulley on my cranks should increase my motors cubes?!?!? awesome :hsugh:
You stupid or something son?
Notice the " " marks around displacement when I was talkin about adding more air volume via spinning the super charger faster? I must have given you too much credit to asume you could understand that. Let me go back an elementy level so we can get on the same page. Displacement= potential volume of air a engine displaces. Rated in cubic inches or liters. Extremely rarely is it though that a 6.0l engine will displace 6.0l while running. (two complete crank revolution under its own power) There we run into a little thing call volumetric efficiency. under 100% and its moving less than 6.0l per two revs. Over 100% and is moving more than 6.0l. Ok so now we have a guy that has increased is baseline displacement, and increased his VE with other major mods and fine tuning. and another guy with a smaller base cube that is probably running even less efficient (super chargers rob alot of power, and generate alot of heat in the intake carge). You guys are already crying about the supercharger?
Simple question. Who do you think will win. Quick, or the lightening.
---
### Author:  [@eurodad](https://forums.speedlife.net/u/eurodad)
#### Post date: [December 7, 2006, 9:05am UTC](https://forums.speedlife.net/t/att-keyboard-racers-what-pittspeed-grudge-match-are-you-most-interested-in-next-year/186509/160 "2006-12-07T09:05:22Z")
noone will win cause quik won’t race. he’ll have some excuse.
[Previous page](https://forums.speedlife.net/t/att-keyboard-racers-what-pittspeed-grudge-match-are-you-most-interested-in-next-year/186509.md?page=7)
[Next page](https://forums.speedlife.net/t/att-keyboard-racers-what-pittspeed-grudge-match-are-you-most-interested-in-next-year/186509.md?page=9)