# Attn: Cutty and other G-body freaks **URL:** \ **Category:** PittSpeed Off Topic\ **Created:** [February 22, 2005, 12:35pm UTC](https://forums.speedlife.net/t/attn-cutty-and-other-g-body-freaks/172451 "2005-02-22T12:35:26Z")\ **Posts on this page:** 13\ **Page:** 1
**Author:** ![Darkstar](https://avatars.discourse-cdn.com/v4/letter/d/b487fb/32.png) [@Darkstar](https://forums.speedlife.net/u/Darkstar)\ **Post date:** [February 22, 2005, 12:35pm UTC](https://forums.speedlife.net/t/attn-cutty-and-other-g-body-freaks/172451/1 "2005-02-22T12:35:26Z")
my good buddy down here just purchased a 80 something Monte Carlo SS. He wants to lower it a little bit to ditch the 4x4 look. Whats the hookup on that? ---
**Author:** ![77rednecktruck](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/77rednecktruck/32/5966_2.png) [@77rednecktruck](https://forums.speedlife.net/u/77rednecktruck)\ **Post date:** [February 22, 2005, 12:36pm UTC](https://forums.speedlife.net/t/attn-cutty-and-other-g-body-freaks/172451/2 "2005-02-22T12:36:27Z")
> [@Darkstar](#): > > my good buddy down here just purchased a 80 something Monte Carlo SS. He wants to lower it a little bit to ditch the 4x4 look. Whats the hookup on that? hacksaw and a little bit of elbow grease goes a long way to lowering a car. ---
**Author:** ![boostjunkie](https://avatars.discourse-cdn.com/v4/letter/b/fbc32d/32.png) [@boostjunkie](https://forums.speedlife.net/u/boostjunkie)\ **Post date:** [February 22, 2005, 12:36pm UTC](https://forums.speedlife.net/t/attn-cutty-and-other-g-body-freaks/172451/3 "2005-02-22T12:36:46Z")
> [@Darkstar](#): > > my good buddy down here just purchased a 80 something Monte Carlo SS. He wants to lower it a little bit to ditch the 4x4 look. Whats the hookup on that? go with Bell Tec Summit sell them ---
**Author:** ![Silver\_WS6](https://avatars.discourse-cdn.com/v4/letter/s/c0e974/32.png) [@Silver\_WS6](https://forums.speedlife.net/u/Silver_WS6)\ **Post date:** [February 22, 2005, 12:38pm UTC](https://forums.speedlife.net/t/attn-cutty-and-other-g-body-freaks/172451/4 "2005-02-22T12:38:42Z")
u wanta ghetto cheap way or the right way ?? 87 iroc camaro front springs cut 1 -2 coils off stiff n lower then s10 rear springs cut a lil good way kyb shocks s10 rear springs camaro front springs cut 1 1/2 coils and 2 inch beltech dropp spindles ---
**Author:** ![OLDS\_ROCKETMAN](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/olds_rocketman/32/5942_2.png) [@OLDS\_ROCKETMAN](https://forums.speedlife.net/u/OLDS_ROCKETMAN)\ **Post date:** [February 22, 2005, 12:40pm UTC](https://forums.speedlife.net/t/attn-cutty-and-other-g-body-freaks/172451/5 "2005-02-22T12:40:39Z")
just find some tired ass springs from one in the junk yard or fill it with fat black women. ---
**Author:** ![Darkstar](https://avatars.discourse-cdn.com/v4/letter/d/b487fb/32.png) [@Darkstar](https://forums.speedlife.net/u/Darkstar)\ **Post date:** [February 22, 2005, 2:46pm UTC](https://forums.speedlife.net/t/attn-cutty-and-other-g-body-freaks/172451/6 "2005-02-22T14:46:29Z")
> [@Cutty](#): > > just find some tired ass springs from one in the junk yard or fill it with fat black women. heres the perfect opportunity for you to drop some good G-body knowledge… and you suggest to fill it with fat black women? I know fat bitches are the traditional way to lower a g-body, but I was hoping for something a little more permanent. ---
**Author:** ![22PSI](https://avatars.discourse-cdn.com/v4/letter/2/4af34b/32.png) [@22PSI](https://forums.speedlife.net/u/22PSI)\ **Post date:** [February 22, 2005, 2:50pm UTC](https://forums.speedlife.net/t/attn-cutty-and-other-g-body-freaks/172451/7 "2005-02-22T14:50:43Z")
i have my old saggy rear springs, sitting in a corner, and my front saggy ones are still on the car. Got new front springs waiting to be put in. i will get rid my old saggy springs real cheap if interested. ---
**Author:** ![Darkstar](https://avatars.discourse-cdn.com/v4/letter/d/b487fb/32.png) [@Darkstar](https://forums.speedlife.net/u/Darkstar)\ **Post date:** [February 22, 2005, 2:52pm UTC](https://forums.speedlife.net/t/attn-cutty-and-other-g-body-freaks/172451/8 "2005-02-22T14:52:50Z")
> [@22PSI](#): > > i have my old saggy rear springs, sitting in a corner, and my front saggy ones are still on the car. Got new front springs waiting to be put in. i will get rid my old saggy springs real cheap if interested. are they gonna be any lower than the old, saggy springs that are already on his car? ---
**Author:** ![22PSI](https://avatars.discourse-cdn.com/v4/letter/2/4af34b/32.png) [@22PSI](https://forums.speedlife.net/u/22PSI)\ **Post date:** [February 22, 2005, 3:24pm UTC](https://forums.speedlife.net/t/attn-cutty-and-other-g-body-freaks/172451/9 "2005-02-22T15:24:03Z")
don’t know how low your looking to go, these would just be little lower than stock ---
**Author:** ![Darkstar](https://avatars.discourse-cdn.com/v4/letter/d/b487fb/32.png) [@Darkstar](https://forums.speedlife.net/u/Darkstar)\ **Post date:** [February 22, 2005, 5:11pm UTC](https://forums.speedlife.net/t/attn-cutty-and-other-g-body-freaks/172451/10 "2005-02-22T17:11:22Z")
> [@22PSI](#): > > don’t know how low your looking to go, these would just be little lower than stock gotcha. I think he’s looking for a good 2-3 inch drop. ---
**Author:** ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)\ **Post date:** [February 22, 2005, 7:08pm UTC](https://forums.speedlife.net/t/attn-cutty-and-other-g-body-freaks/172451/11 "2005-02-22T19:08:10Z")
> [@Darkstar](#): > > gotcha. I think he’s looking for a good 2-3 inch drop. put u in the car=lowerd ---
**Author:** ![OLDS\_ROCKETMAN](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/olds_rocketman/32/5942_2.png) [@OLDS\_ROCKETMAN](https://forums.speedlife.net/u/OLDS_ROCKETMAN)\ **Post date:** [February 23, 2005, 10:46am UTC](https://forums.speedlife.net/t/attn-cutty-and-other-g-body-freaks/172451/12 "2005-02-23T10:46:17Z")
> [@Darkstar](#): > > heres the perfect opportunity for you to drop some good G-body knowledge… > > and you suggest to fill it with fat black women? I know fat bitches are the traditional way to lower a g-body, but I was hoping for something a little more permanent. people already said the same things i would, beltech spindles and drops springs. the ghetto way is to heat to the coils or cut a few out but then the car rides like shit. There is also a way to get a lowered look…add ground effects, sounds kinda dumb but they do make a nice subtle ground effect for the SS. My SS sits a little ass high but i kinda like the stance, its not a vette or something thats supposed to sit low, Lowering muscle cars is the craze right now but when it goes out of style i’ll be a head of the game, ---
**Author:** ![YellowZ](https://avatars.discourse-cdn.com/v4/letter/y/edb3f5/32.png) [@YellowZ](https://forums.speedlife.net/u/YellowZ)\ **Post date:** [February 23, 2005, 11:14am UTC](https://forums.speedlife.net/t/attn-cutty-and-other-g-body-freaks/172451/13 "2005-02-23T11:14:44Z")
> [@Darkstar](#): > > I know fat bitches are the traditional way to lower a g-body, but I was hoping for something a little more permanent. Sig material :bowrofl: