# ATTN: Euro guys **URL:** \ **Category:** PittSpeed Automotive\ **Created:** [April 3, 2008, 3:51pm UTC](https://forums.speedlife.net/t/attn-euro-guys/196581 "2008-04-03T15:51:23Z")\ **Posts on this page:** 11\ **Page:** 1
**Author:** ![ShalerPunk](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shalerpunk/32/5976_2.png) [@ShalerPunk](https://forums.speedlife.net/u/ShalerPunk)\ **Post date:** [April 3, 2008, 3:51pm UTC](https://forums.speedlife.net/t/attn-euro-guys/196581/1 "2008-04-03T15:51:23Z")
I have an Austria plate and a Rieger Tuning frame, and i can’t fit the fucking plate into the frame. Did Euro plates come in multiple sizes, or am I retarded? They’re both 21" wide, but the plate seems to be 4 11/16" tall, while the frame looks only able to accommodate 4 8/16". wtf? ---
**Author:** ![JackdUp](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jackdup/32/6015_2.png) [@JackdUp](https://forums.speedlife.net/u/JackdUp)\ **Post date:** [April 3, 2008, 4:58pm UTC](https://forums.speedlife.net/t/attn-euro-guys/196581/2 "2008-04-03T16:58:35Z")
trimmen the plate ---
**Author:** ![ShalerPunk](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shalerpunk/32/5976_2.png) [@ShalerPunk](https://forums.speedlife.net/u/ShalerPunk)\ **Post date:** [April 3, 2008, 5:09pm UTC](https://forums.speedlife.net/t/attn-euro-guys/196581/3 "2008-04-03T17:09:00Z")
> [@i know another one..lol](https://forums.speedlife.net/t/i-know-another-one-lol/35728/46): > > trimmen the plate with? ---
**Author:** ![1320](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/1320/32/5949_2.png) [@1320](https://forums.speedlife.net/u/1320)\ **Post date:** [April 3, 2008, 5:09pm UTC](https://forums.speedlife.net/t/attn-euro-guys/196581/4 "2008-04-03T17:09:25Z")
I think the older ones like you have may be a bit taller. The one I ordered is 520mm long x 111mm tall. 111 mm is roughly equal to 4.37 inches tall. If yours is 4 and 11/16" inches tall that puts you around 4.69 inches or 119.12millimeters. Also, you can verify the length of the plate which should be 520mm or 20.47 inches by letting Mrs. Knapp deepthroat it. I believe she has a 21 inch capacity. ---
**Author:** ![JackdUp](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jackdup/32/6015_2.png) [@JackdUp](https://forums.speedlife.net/u/JackdUp)\ **Post date:** [April 3, 2008, 5:44pm UTC](https://forums.speedlife.net/t/attn-euro-guys/196581/5 "2008-04-03T17:44:14Z")
tin snips? ---
**Author:** ![BeastMode](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/beastmode/32/6027_2.png) [@BeastMode](https://forums.speedlife.net/u/BeastMode)\ **Post date:** [April 3, 2008, 5:59pm UTC](https://forums.speedlife.net/t/attn-euro-guys/196581/6 "2008-04-03T17:59:01Z")
cut off wheel ---
**Author:** ![ShalerPunk](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shalerpunk/32/5976_2.png) [@ShalerPunk](https://forums.speedlife.net/u/ShalerPunk)\ **Post date:** [April 3, 2008, 6:06pm UTC](https://forums.speedlife.net/t/attn-euro-guys/196581/7 "2008-04-03T18:06:09Z")
the only tools i have are a craftsman 216pc socket set and a hammer. fuck. and after measuring, i’m looking at almost 7mm that’ll need to be trimmed. ---
**Author:** ![1st\_v-dub](https://avatars.discourse-cdn.com/v4/letter/1/ee7513/32.png) [@1st\_v-dub](https://forums.speedlife.net/u/1st_v-dub)\ **Post date:** [April 4, 2008, 6:07am UTC](https://forums.speedlife.net/t/attn-euro-guys/196581/8 "2008-04-04T06:07:55Z")
use hammer to break frame. use hammer to break something else. Reassemble all broken pieces into a frame that is 7mm larger than current? ---
**Author:** ![dyingwish](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dyingwish/32/6041_2.png) [@dyingwish](https://forums.speedlife.net/u/dyingwish)\ **Post date:** [April 4, 2008, 6:23am UTC](https://forums.speedlife.net/t/attn-euro-guys/196581/9 "2008-04-04T06:23:32Z")
If a hammer can’t fix it, it ain’t broke. ---
**Author:** ![b13SER](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/b13ser/32/3356_2.png) [@b13SER](https://forums.speedlife.net/u/b13SER)\ **Post date:** [April 9, 2008, 12:54am UTC](https://forums.speedlife.net/t/attn-euro-guys/196581/10 "2008-04-09T00:54:06Z")
ill cut it for you. you know where i live. ---
**Author:** ![fshowcars](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/fshowcars/32/5937_2.png) [@fshowcars](https://forums.speedlife.net/u/fshowcars)\ **Post date:** [April 9, 2008, 4:58am UTC](https://forums.speedlife.net/t/attn-euro-guys/196581/11 "2008-04-09T04:58:09Z")
> [@WTB: P71 Police Interceptor 99-up](https://forums.speedlife.net/t/wtb-p71-police-interceptor-99-up/35344/9): > > I have an Austria plate and a Rieger Tuning frame, and i can’t fit the fucking plate into the frame. Did Euro plates come in multiple sizes, or am I retarded? > > They’re both 21" wide, but the plate seems to be 4 11/16" tall, while the frame looks only able to accommodate 4 8/16". > > wtf? did you seriously just measure that in inches? how not euro of you…