# attn:foxbody drivers / shaggy

**URL:** <https://forums.speedlife.net/t/attn-foxbody-drivers-shaggy/167062>\
**Category:** PittSpeed Off Topic\
**Created:** [June 11, 2004, 6:05am UTC](https://forums.speedlife.net/t/attn-foxbody-drivers-shaggy/167062 "2004-06-11T06:05:02Z")\
**Posts on this page:** 5\
**Page:** 2

<div class="post-metadata">

**Author:** ![Shaggy](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shaggy/32/5945_2.png) [@Shaggy](https://forums.speedlife.net/u/Shaggy)\
**Post date:** [June 11, 2004, 11:35am UTC](https://forums.speedlife.net/t/attn-foxbody-drivers-shaggy/167062/21 "2004-06-11T11:35:47Z")

</div>

> [@turbovw18](#):
>
> headlight problems… if one headlight burns out, do they both not turn on?
> 
> fuse is cool, parking lights work, one bulb is good, didn’t check the other… but the headlights won’t turn on…
> 
> if i was at the car i could check a lot better, but i’m not… so just wondering if foxbody’s have a common headlight issue…
> 
> flame away, it IS a mustang anyway… :eek4:

i’d say its a coincidence they both stop working at the same time-  
if 1 goes out then the other still works. just luck it happens to be both.

Im also having issues w/ the turn signal switch as chad says- But  
my low beams work and my hazards work too-  
Focking fords :kekegay: :hs:

---

<div class="post-metadata">

**Author:** ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)\
**Post date:** [June 11, 2004, 12:00pm UTC](https://forums.speedlife.net/t/attn-foxbody-drivers-shaggy/167062/22 "2004-06-11T12:00:20Z")

</div>

both low beams out or like chads says switch!!!

i swap is when u change a motor to something other than it came with from the factory!!!302 to 351=swap!!!302 to 347 = motor change to a build motor!!!1

---

<div class="post-metadata">

**Author:** ![Shaggy](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shaggy/32/5945_2.png) [@Shaggy](https://forums.speedlife.net/u/Shaggy)\
**Post date:** [June 11, 2004, 12:04pm UTC](https://forums.speedlife.net/t/attn-foxbody-drivers-shaggy/167062/23 "2004-06-11T12:04:54Z")

</div>

> [@8.1crew](#):
>
> both low beams out or like chads says switch!!!
> 
> i swap is when u change a motor to something other than it came with from the factory!!!302 to 351=swap!!!302 to 347 = motor change to a build motor!!!1

sam spelled pretty good :hahano:

---

<div class="post-metadata">

**Author:** ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)\
**Post date:** [June 11, 2004, 12:06pm UTC](https://forums.speedlife.net/t/attn-foxbody-drivers-shaggy/167062/24 "2004-06-11T12:06:24Z")

</div>

:finger:

> [@Shaggy](#):
>
> sam spelled pretty good :hahano:

i did that my self :asshole

---

<div class="post-metadata">

**Author:** ![Shaggy](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shaggy/32/5945_2.png) [@Shaggy](https://forums.speedlife.net/u/Shaggy)\
**Post date:** [June 11, 2004, 8:19pm UTC](https://forums.speedlife.net/t/attn-foxbody-drivers-shaggy/167062/25 "2004-06-11T20:19:25Z")

</div>

Update\_

moron forgot to click to the low beam switch 🙂

j/k :dunno: sOnny give an update when its possible :bigok:

[Previous page](https://forums.speedlife.net/t/attn-foxbody-drivers-shaggy/167062.md?page=1)