# ATTN ppl with detroit locker

**URL:** https://forums.speedlife.net/t/attn-ppl-with-detroit-locker/180420
**Category:** PittSpeed Automotive
**Created:** [February 21, 2006, 4:23am UTC](https://forums.speedlife.net/t/attn-ppl-with-detroit-locker/180420 "2006-02-21T04:23:38Z")
**Posts on this page:** 20
**Page:** 1

<div class="post-metadata">

### Author: ![Turbo\_Silverado](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/turbo_silverado/32/5990_2.png) [@Turbo\_Silverado](https://forums.speedlife.net/u/Turbo_Silverado)
#### Post date: [February 21, 2006, 4:23am UTC](https://forums.speedlife.net/t/attn-ppl-with-detroit-locker/180420/1 "2006-02-21T04:23:38Z")

</div>

or ppl that have experince with it

put my new rearend in last nite, broke it in while on the lift still witha jack under the rear end to get rid of the bad pinon angle, everything sounded perfect, heard no noise from the rear end. soo when i put it on the ground and go to back out, the slightest turn i would here chatter or rearend nosie…would get louder or worse if it was a harder turn!! Id say it would sound like its ratchiting (sp) is this how it normal sounds?

All info is greatly appericated!

its a Moser 9inch with 4.30s detroit locker, 31spline moser axles

---

<div class="post-metadata">

### Author: ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)
#### Post date: [February 21, 2006, 4:58am UTC](https://forums.speedlife.net/t/attn-ppl-with-detroit-locker/180420/2 "2006-02-21T04:58:24Z")

</div>

yes,that hows it is,ur goingto be sorry for how much u daily drive ur car!

---

<div class="post-metadata">

### Author: ![EXTtoG35](https://avatars.discourse-cdn.com/v4/letter/e/67e7ee/32.png) [@EXTtoG35](https://forums.speedlife.net/u/EXTtoG35)
#### Post date: [February 21, 2006, 5:05am UTC](https://forums.speedlife.net/t/attn-ppl-with-detroit-locker/180420/3 "2006-02-21T05:05:29Z")

</div>

[http://www.detroitlocker.com/Techtips.htm](http://www.detroitlocker.com/Techtips.htm)

I didnt know a detroit locker or spool was streetable. Will that just make noise or is it going to shorten the life of his rear?

---

<div class="post-metadata">

### Author: ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)
#### Post date: [February 21, 2006, 5:10am UTC](https://forums.speedlife.net/t/attn-ppl-with-detroit-locker/180420/4 "2006-02-21T05:10:25Z")

</div>

noise & wear driverablity

---

<div class="post-metadata">

### Author: ![Turbo\_Silverado](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/turbo_silverado/32/5990_2.png) [@Turbo\_Silverado](https://forums.speedlife.net/u/Turbo_Silverado)
#### Post date: [February 21, 2006, 5:13am UTC](https://forums.speedlife.net/t/attn-ppl-with-detroit-locker/180420/5 "2006-02-21T05:13:30Z")

</div>

> [@pewterss](#):
>
> yes,that hows it is,ur goingto be sorry for how much u daily drive ur car!

ya im going to be selling this third member, or just selling the locker, and getting a tru trac

---

<div class="post-metadata">

### Author: ![imported\_SINISTER](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/imported_sinister/32/5970_2.png) [@imported\_SINISTER](https://forums.speedlife.net/u/imported_SINISTER)
#### Post date: [February 21, 2006, 8:04am UTC](https://forums.speedlife.net/t/attn-ppl-with-detroit-locker/180420/6 "2006-02-21T08:04:44Z")

</div>

clickilty clank clicklity clank

detroit locker why the hell did you get one of dem…

---

<div class="post-metadata">

### Author: ![A468Bu](https://avatars.discourse-cdn.com/v4/letter/a/278dde/32.png) [@A468Bu](https://forums.speedlife.net/u/A468Bu)
#### Post date: [February 21, 2006, 8:26am UTC](https://forums.speedlife.net/t/attn-ppl-with-detroit-locker/180420/7 "2006-02-21T08:26:36Z")

</div>

Ya they make horrible noise

---

<div class="post-metadata">

### Author: ![BlkP42E](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/blkp42e/32/5938_2.png) [@BlkP42E](https://forums.speedlife.net/u/BlkP42E)
#### Post date: [February 21, 2006, 8:42am UTC](https://forums.speedlife.net/t/attn-ppl-with-detroit-locker/180420/8 "2006-02-21T08:42:17Z")

</div>

i agree. what the hell did you get a locker for?

---

<div class="post-metadata">

### Author: ![Turbo\_Silverado](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/turbo_silverado/32/5990_2.png) [@Turbo\_Silverado](https://forums.speedlife.net/u/Turbo_Silverado)
#### Post date: [February 21, 2006, 9:20am UTC](https://forums.speedlife.net/t/attn-ppl-with-detroit-locker/180420/9 "2006-02-21T09:20:23Z")

</div>

> [@SINISTER](#):
>
> clickilty clank clicklity clank
> 
> detroit locker why the hell did you get one of dem…

was in the rearend, got it as a package

---

<div class="post-metadata">

### Author: ![imported\_SINISTER](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/imported_sinister/32/5970_2.png) [@imported\_SINISTER](https://forums.speedlife.net/u/imported_SINISTER)
#### Post date: [February 21, 2006, 9:31am UTC](https://forums.speedlife.net/t/attn-ppl-with-detroit-locker/180420/10 "2006-02-21T09:31:47Z")

</div>

> [@00BlackSS](#):
>
> was in the rearend, got it as a package

12 bolt?? who makes it moser strange?

you could of gotten a eaton posi

---

<div class="post-metadata">

### Author: ![eurodad](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/eurodad/32/5988_2.png) [@eurodad](https://forums.speedlife.net/u/eurodad)
#### Post date: [February 21, 2006, 9:42am UTC](https://forums.speedlife.net/t/attn-ppl-with-detroit-locker/180420/11 "2006-02-21T09:42:44Z")

</div>

> [@SINISTER](#):
>
> 12 bolt?? who makes it moser strange?
> 
> you could of gotten a eaton posi

reading \> you

> [@00BlackSS](#):
>
> its a Moser 9inch with 4.30s detroit locker, 31spline moser axles

---

<div class="post-metadata">

### Author: ![Turbo\_Silverado](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/turbo_silverado/32/5990_2.png) [@Turbo\_Silverado](https://forums.speedlife.net/u/Turbo_Silverado)
#### Post date: [February 21, 2006, 10:59am UTC](https://forums.speedlife.net/t/attn-ppl-with-detroit-locker/180420/12 "2006-02-21T10:59:18Z")

</div>

> [@SINISTER](#):
>
> 12 bolt?? who makes it moser strange?
> 
> you could of gotten a eaton posi

moser, was a place in illinos selling em, with detroit lockers

---

<div class="post-metadata">

### Author: ![Slim\_06\_F-150](https://avatars.discourse-cdn.com/v4/letter/s/d26b3c/32.png) [@Slim\_06\_F-150](https://forums.speedlife.net/u/Slim_06_F-150)
#### Post date: [February 21, 2006, 11:03am UTC](https://forums.speedlife.net/t/attn-ppl-with-detroit-locker/180420/13 "2006-02-21T11:03:10Z")

</div>

how much did it cost ya if you dont mind me asking, but with it being your DD shoulda just keep buyin 10 bolts unless your going all out drag racing everyweek

---

<div class="post-metadata">

### Author: ![Turbo\_Silverado](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/turbo_silverado/32/5990_2.png) [@Turbo\_Silverado](https://forums.speedlife.net/u/Turbo_Silverado)
#### Post date: [February 21, 2006, 11:06am UTC](https://forums.speedlife.net/t/attn-ppl-with-detroit-locker/180420/14 "2006-02-21T11:06:34Z")

</div>

> [@Slim 01 WS-6](#):
>
> how much did it cost ya if you dont mind me asking, but with it being your DD shoulda just keep buyin 10 bolts unless your going all out drag racing everyweek

fuck i ant going to keep buying 10bolts…i have some parts going on the car now that are going to be helping me make some nice power!!! fuck them 10 bolts, i hate em!!

i might sell this 9 inch, and get a 12 bolt…or just buy a new thrid member, or some kind of posi for the car

---

<div class="post-metadata">

### Author: ![Slim\_06\_F-150](https://avatars.discourse-cdn.com/v4/letter/s/d26b3c/32.png) [@Slim\_06\_F-150](https://forums.speedlife.net/u/Slim_06_F-150)
#### Post date: [February 21, 2006, 11:15am UTC](https://forums.speedlife.net/t/attn-ppl-with-detroit-locker/180420/15 "2006-02-21T11:15:12Z")

</div>

my rear end doesnt make any noise at all i got the new rear end cover on there so hopefully it will be ok, my interior panels rattle like none other though

---

<div class="post-metadata">

### Author: ![Turbo\_Silverado](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/turbo_silverado/32/5990_2.png) [@Turbo\_Silverado](https://forums.speedlife.net/u/Turbo_Silverado)
#### Post date: [February 21, 2006, 11:17am UTC](https://forums.speedlife.net/t/attn-ppl-with-detroit-locker/180420/16 "2006-02-21T11:17:38Z")

</div>

> [@Slim 01 WS-6](#):
>
> my rear end doesnt make any noise at all i got the new rear end cover on there so hopefully it will be ok, my interior panels rattle like none other though

should have heard my 10 bolt

---

<div class="post-metadata">

### Author: ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)
#### Post date: [February 21, 2006, 11:23am UTC](https://forums.speedlife.net/t/attn-ppl-with-detroit-locker/180420/17 "2006-02-21T11:23:02Z")

</div>

> [@Slim 01 WS-6](#):
>
> my rear end doesnt make any noise at all i got the new rear end cover on there so hopefully it will be ok, my interior panels rattle like none other though

put screw under rear seat speaker cover!(call for details)

---

<div class="post-metadata">

### Author: ![imported\_gearhead](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/imported_gearhead/32/5957_2.png) [@imported\_gearhead](https://forums.speedlife.net/u/imported_gearhead)
#### Post date: [February 21, 2006, 1:42pm UTC](https://forums.speedlife.net/t/attn-ppl-with-detroit-locker/180420/18 "2006-02-21T13:42:35Z")

</div>

Is this the full locker that is the carrier as well? Usually they arn’t very loud… or not as loud as the Detroit Lock-rite’s.

---

<div class="post-metadata">

### Author: ![Turbo\_Silverado](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/turbo_silverado/32/5990_2.png) [@Turbo\_Silverado](https://forums.speedlife.net/u/Turbo_Silverado)
#### Post date: [February 21, 2006, 1:43pm UTC](https://forums.speedlife.net/t/attn-ppl-with-detroit-locker/180420/19 "2006-02-21T13:43:46Z")

</div>

> [@gearhead](#):
>
> Is this the full locker that is the carrier as well? Usually they arn’t very loud… or not as loud as the Detroit Lock-rite’s.

its not a spool, not a locker, its not ver loud, but going around bends u def here it…i guess a way to say what it souns like is, ratchiting

---

<div class="post-metadata">

### Author: ![imported\_SINISTER](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/imported_sinister/32/5970_2.png) [@imported\_SINISTER](https://forums.speedlife.net/u/imported_SINISTER)
#### Post date: [February 21, 2006, 2:06pm UTC](https://forums.speedlife.net/t/attn-ppl-with-detroit-locker/180420/20 "2006-02-21T14:06:09Z")

</div>

> [@Slim 01 WS-6](#):
>
> how much did it cost ya if you dont mind me asking, but with it being your DD shoulda just keep buyin 10 bolts unless your going all out drag racing everyweek

10 boplts fucking suck

tell us that when axel breaks athe that fucker comes flyout

first upgrade to f body! rear end def if 6 speed

[Next page](https://forums.speedlife.net/t/attn-ppl-with-detroit-locker/180420.md?page=2)
