# AUTO TO A MANUAL?

**URL:** <https://forums.speedlife.net/t/auto-to-a-manual/86653>\
**Category:** SON240sx Automotive\
**Created:** [June 23, 2005, 2:37pm UTC](https://forums.speedlife.net/t/auto-to-a-manual/86653 "2005-06-23T14:37:47Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![paqman](https://avatars.discourse-cdn.com/v4/letter/p/b77776/32.png) [@paqman](https://forums.speedlife.net/u/paqman)\
**Post date:** [June 23, 2005, 2:37pm UTC](https://forums.speedlife.net/t/auto-to-a-manual/86653/1 "2005-06-23T14:37:47Z")

</div>

I need some professional advise. Please read this post on neo and let me know what you guys think, thanks for any help.  
Ryan

[http://forums.neo240sx.ca/viewtopic.php?t=5526](http://forums.neo240sx.ca/viewtopic.php?t=5526)

---

<div class="post-metadata">

**Author:** ![DarkForceJackal](https://avatars.discourse-cdn.com/v4/letter/d/b38774/32.png) [@DarkForceJackal](https://forums.speedlife.net/u/DarkForceJackal)\
**Post date:** [June 23, 2005, 3:04pm UTC](https://forums.speedlife.net/t/auto-to-a-manual/86653/2 "2005-06-23T15:04:33Z")

</div>

There’s a fair bit of misc. info around this forum, do a search on “auto manual” and check the sites recommended to this guy as well:

[http://www.son240sx.ca/forum/viewtopic.php?t=13407](http://www.son240sx.ca/forum/viewtopic.php?t=13407)

Good luck.

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\
**Post date:** [June 23, 2005, 8:46pm UTC](https://forums.speedlife.net/t/auto-to-a-manual/86653/3 "2005-06-23T20:46:47Z")

</div>

Factory Service Manual

Manual Transmission

Shifter

Release Bearing

Pressure plate

Clutch

Flywheel from a m/t

M/T Mounting plate  
Flywheel Bolts (m/t bolts are longer than a/t bolts)

Clutch pedal

Brake pedal (From M/T car)

Clutch master cylinder w/ resevoir

Clutch slave cylinder

Clutch hydraulic lines (Main line, bleeder line, rubber line to slave cylinder)  
Drive shaft front & rear section

Adapter bolts & nuts for mounting crossmember to the 5 speed (2)

Reverse light sensor, Neutral position sensor, 5th gear sensor (on side of 5 speed)

Lower shift boot & plate

Upper Shift boot & Finisher plate.

---

<div class="post-metadata">

**Author:** ![Sven](https://avatars.discourse-cdn.com/v4/letter/s/e47c2d/32.png) [@Sven](https://forums.speedlife.net/u/Sven)\
**Post date:** [June 23, 2005, 9:42pm UTC](https://forums.speedlife.net/t/auto-to-a-manual/86653/4 "2005-06-23T21:42:01Z")

</div>

Locked but only after you got helpful advice anyway.  
You got lucky this time lazy.