# Aw, not again(Brakes content ITT)

**URL:** <https://forums.speedlife.net/t/aw-not-again-brakes-content-itt/242224>\
**Category:** Shift518 Automotive\
**Created:** [February 18, 2009, 12:06pm UTC](https://forums.speedlife.net/t/aw-not-again-brakes-content-itt/242224 "2009-02-18T12:06:07Z")\
**Posts on this page:** 20\
**Page:** 3

<div class="post-metadata">

**Author:** ![94Gt5.0](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/94gt5.0/32/6377_2.png) [@94Gt5.0](https://forums.speedlife.net/u/94Gt5.0)\
**Post date:** [February 18, 2009, 6:32pm UTC](https://forums.speedlife.net/t/aw-not-again-brakes-content-itt/242224/41 "2009-02-18T18:32:34Z")

</div>

Slightly hung up caliper perhaps?

---

<div class="post-metadata">

**Author:** ![88slowmarro](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/88slowmarro/32/6339_2.png) [@88slowmarro](https://forums.speedlife.net/u/88slowmarro)\
**Post date:** [February 18, 2009, 6:35pm UTC](https://forums.speedlife.net/t/aw-not-again-brakes-content-itt/242224/42 "2009-02-18T18:35:10Z")

</div>

> [@TW: 2005 Ricer Red EVO 8](https://forums.speedlife.net/t/tw-2005-ricer-red-evo-8/14377/11):
>
> Slightly hung up caliper perhaps?

that or slides ,it dont take much to get em hot esp when ya ride em or they stickin

---

<div class="post-metadata">

**Author:** ![plaf713](https://avatars.discourse-cdn.com/v4/letter/p/439d5e/32.png) [@plaf713](https://forums.speedlife.net/u/plaf713)\
**Post date:** [February 18, 2009, 6:36pm UTC](https://forums.speedlife.net/t/aw-not-again-brakes-content-itt/242224/43 "2009-02-18T18:36:46Z")

</div>

could be a possible bearing

---

<div class="post-metadata">

**Author:** ![88slowmarro](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/88slowmarro/32/6339_2.png) [@88slowmarro](https://forums.speedlife.net/u/88slowmarro)\
**Post date:** [February 18, 2009, 6:42pm UTC](https://forums.speedlife.net/t/aw-not-again-brakes-content-itt/242224/44 "2009-02-18T18:42:50Z")

</div>

not likely as there is no noise ,most sealed bearings howl like a bastard when there bad

---

<div class="post-metadata">

**Author:** ![votblindub](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/votblindub/32/6280_2.png) [@votblindub](https://forums.speedlife.net/u/votblindub)\
**Post date:** [February 18, 2009, 6:58pm UTC](https://forums.speedlife.net/t/aw-not-again-brakes-content-itt/242224/45 "2009-02-18T18:58:51Z")

</div>

> [@What beats a rock to the face at 40mph?](https://forums.speedlife.net/t/what-beats-a-rock-to-the-face-at-40mph/14384/15):
>
> is it pulsing in the pedal or the steering wheel? if its in the pedal its most likely the rear brakes if its in the st wheel its in the front …rotors are prolly warped due to bad braking or suttin hung up a little ,even new rotors are warped 99% of the time .if ya have to ask bring it to a shop and let them diag it and fix it not callin ya stupid but i do remeber ya havin trouble doin these breaks .so in your case bring to someone who knows how to do them dont do it yourself

my pedal pulses, the steering wheel is fine. i might take it to a midas or something and have them look at it

---

<div class="post-metadata">

**Author:** ![votblindub](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/votblindub/32/6280_2.png) [@votblindub](https://forums.speedlife.net/u/votblindub)\
**Post date:** [February 18, 2009, 6:59pm UTC](https://forums.speedlife.net/t/aw-not-again-brakes-content-itt/242224/46 "2009-02-18T18:59:08Z")

</div>

> [@ECM Re-programming](https://forums.speedlife.net/t/ecm-re-programming/14393/3):
>
> could be a possible bearing

does that make any kind of sound?

---

<div class="post-metadata">

**Author:** ![88slowmarro](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/88slowmarro/32/6339_2.png) [@88slowmarro](https://forums.speedlife.net/u/88slowmarro)\
**Post date:** [February 18, 2009, 7:03pm UTC](https://forums.speedlife.net/t/aw-not-again-brakes-content-itt/242224/47 "2009-02-18T19:03:44Z")

</div>

> [@Date/things to do ideas...](https://forums.speedlife.net/t/date-things-to-do-ideas/14389/19):
>
> my pedal pulses, the steering wheel is fine. i might take it to a midas or something and have them look at it

its in the rear brakes then ill swear to it the rotor is prolly rusted or pads and rotors are shot either way replace them .and not at midas as they will hit ya 900 for a 2-300 dollar brake job

---

<div class="post-metadata">

**Author:** ![88slowmarro](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/88slowmarro/32/6339_2.png) [@88slowmarro](https://forums.speedlife.net/u/88slowmarro)\
**Post date:** [February 18, 2009, 7:04pm UTC](https://forums.speedlife.net/t/aw-not-again-brakes-content-itt/242224/48 "2009-02-18T19:04:08Z")

</div>

> [@Montoya](https://forums.speedlife.net/t/montoya/14316/40):
>
> does that make any kind of sound?

look up 2 posts:lol

---

<div class="post-metadata">

**Author:** ![votblindub](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/votblindub/32/6280_2.png) [@votblindub](https://forums.speedlife.net/u/votblindub)\
**Post date:** [February 18, 2009, 7:08pm UTC](https://forums.speedlife.net/t/aw-not-again-brakes-content-itt/242224/49 "2009-02-18T19:08:16Z")

</div>

> [@Date/things to do ideas...](https://forums.speedlife.net/t/date-things-to-do-ideas/14389/20):
>
> look up 2 posts:lol

ha! wasnt there when i put mine in. it must have appeared as i was making my post

---

<div class="post-metadata">

**Author:** ![votblindub](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/votblindub/32/6280_2.png) [@votblindub](https://forums.speedlife.net/u/votblindub)\
**Post date:** [February 18, 2009, 7:08pm UTC](https://forums.speedlife.net/t/aw-not-again-brakes-content-itt/242224/50 "2009-02-18T19:08:49Z")

</div>

> [@FS: Used Verizon Kyocera Slider Phone](https://forums.speedlife.net/t/fs-used-verizon-kyocera-slider-phone/11007/22):
>
> its in the rear brakes then ill swear to it the rotor is prolly rusted or pads and rotors are shot either way replace them .and not at midas as they will hit ya 900 for a 2-300 dollar brake job

if they could tell me whats goin on with it, ill try fixing it if i can do it.

---

<div class="post-metadata">

**Author:** ![88slowmarro](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/88slowmarro/32/6339_2.png) [@88slowmarro](https://forums.speedlife.net/u/88slowmarro)\
**Post date:** [February 18, 2009, 7:14pm UTC](https://forums.speedlife.net/t/aw-not-again-brakes-content-itt/242224/51 "2009-02-18T19:14:40Z")

</div>

> [@new plate came in yesterday...](https://forums.speedlife.net/t/new-plate-came-in-yesterday/14397/8):
>
> if they could tell me whats goin on with it, ill try fixing it if i can do it.

what yr is your car a lot of the newer audi and v/w are comin wit electric e/brakes and need a comp to reset em ,and a special tool to reset piston also:thumbup

---

<div class="post-metadata">

**Author:** ![plaf713](https://avatars.discourse-cdn.com/v4/letter/p/439d5e/32.png) [@plaf713](https://forums.speedlife.net/u/plaf713)\
**Post date:** [February 18, 2009, 7:20pm UTC](https://forums.speedlife.net/t/aw-not-again-brakes-content-itt/242224/52 "2009-02-18T19:20:06Z")

</div>

no noise, just shakes like a feeling of bad rotors though, i didnt know that there was noise

---

<div class="post-metadata">

**Author:** ![88slowmarro](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/88slowmarro/32/6339_2.png) [@88slowmarro](https://forums.speedlife.net/u/88slowmarro)\
**Post date:** [February 18, 2009, 7:21pm UTC](https://forums.speedlife.net/t/aw-not-again-brakes-content-itt/242224/53 "2009-02-18T19:21:56Z")

</div>

> [@What beats a rock to the face at 40mph?](https://forums.speedlife.net/t/what-beats-a-rock-to-the-face-at-40mph/14384/21):
>
> no noise, just shakes like a feeling of bad rotors though, i didnt know that there was noise

most sealed bearings there is ,old school ones didnt though untill they were fallin out:lol

---

<div class="post-metadata">

**Author:** ![votblindub](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/votblindub/32/6280_2.png) [@votblindub](https://forums.speedlife.net/u/votblindub)\
**Post date:** [February 18, 2009, 7:25pm UTC](https://forums.speedlife.net/t/aw-not-again-brakes-content-itt/242224/54 "2009-02-18T19:25:30Z")

</div>

mines a 2003

---

<div class="post-metadata">

**Author:** ![Cossey](https://avatars.discourse-cdn.com/v4/letter/c/3ec8ea/32.png) [@Cossey](https://forums.speedlife.net/u/Cossey)\
**Post date:** [February 18, 2009, 7:38pm UTC](https://forums.speedlife.net/t/aw-not-again-brakes-content-itt/242224/55 "2009-02-18T19:38:25Z")

</div>

> [@What beats a rock to the face at 40mph?](https://forums.speedlife.net/t/what-beats-a-rock-to-the-face-at-40mph/14384/15):
>
> even new rotors are warped 99% of the time

Maybe on Wearever rotors lol. High quality stuff is mucho different.

---

<div class="post-metadata">

**Author:** ![88slowmarro](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/88slowmarro/32/6339_2.png) [@88slowmarro](https://forums.speedlife.net/u/88slowmarro)\
**Post date:** [February 18, 2009, 7:44pm UTC](https://forums.speedlife.net/t/aw-not-again-brakes-content-itt/242224/56 "2009-02-18T19:44:05Z")

</div>

im talkin most aftermarket through parts suppliers like adv, napa,foriegn,etc

---

<div class="post-metadata">

**Author:** ![bennyfizzle](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bennyfizzle/32/6291_2.png) [@bennyfizzle](https://forums.speedlife.net/u/bennyfizzle)\
**Post date:** [February 18, 2009, 7:46pm UTC](https://forums.speedlife.net/t/aw-not-again-brakes-content-itt/242224/57 "2009-02-18T19:46:31Z")

</div>

yeah he has oem zimmerman’s though, very legit.

---

<div class="post-metadata">

**Author:** ![88slowmarro](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/88slowmarro/32/6339_2.png) [@88slowmarro](https://forums.speedlife.net/u/88slowmarro)\
**Post date:** [February 18, 2009, 7:48pm UTC](https://forums.speedlife.net/t/aw-not-again-brakes-content-itt/242224/58 "2009-02-18T19:48:30Z")

</div>

> [@Date/things to do ideas...](https://forums.speedlife.net/t/date-things-to-do-ideas/14389/23):
>
> yeah he has oem zimmerman’s though, very legit.

we see a lot of audi,s and v/w,s in wit warped rotors and shit mostly due to hard braking

---

<div class="post-metadata">

**Author:** ![JClark](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jclark/32/6309_2.png) [@JClark](https://forums.speedlife.net/u/JClark)\
**Post date:** [February 18, 2009, 7:51pm UTC](https://forums.speedlife.net/t/aw-not-again-brakes-content-itt/242224/59 "2009-02-18T19:51:16Z")

</div>

Modern vented rotors really dont warp in 99.9% of situations.

---

<div class="post-metadata">

**Author:** ![88slowmarro](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/88slowmarro/32/6339_2.png) [@88slowmarro](https://forums.speedlife.net/u/88slowmarro)\
**Post date:** [February 18, 2009, 7:53pm UTC](https://forums.speedlife.net/t/aw-not-again-brakes-content-itt/242224/60 "2009-02-18T19:53:18Z")

</div>

> [@New restaurant at Galleria](https://forums.speedlife.net/t/new-restaurant-at-galleria/14396/10):
>
> Modern vented rotors really dont warp in 99.9% of situations.

with alot of hard stops they do ,along wit other circimstances though

[Previous page](https://forums.speedlife.net/t/aw-not-again-brakes-content-itt/242224.md?page=2)

[Next page](https://forums.speedlife.net/t/aw-not-again-brakes-content-itt/242224.md?page=4)
