# B18C Build Troubleshooting

**URL:** <https://forums.speedlife.net/t/b18c-build-troubleshooting/196698>\
**Category:** PittSpeed Automotive\
**Created:** [April 9, 2008, 5:37am UTC](https://forums.speedlife.net/t/b18c-build-troubleshooting/196698 "2008-04-09T05:37:33Z")\
**Posts on this page:** 1\
**Showing post:** 49

<div class="post-metadata">

**Author:** ![dyingwish](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dyingwish/32/6041_2.png) [@dyingwish](https://forums.speedlife.net/u/dyingwish)\
**Post date:** [April 14, 2008, 4:48am UTC](https://forums.speedlife.net/t/b18c-build-troubleshooting/196698/49 "2008-04-14T04:48:20Z")

</div>

> [@Cobraman04 vs. ugososlo](https://forums.speedlife.net/t/cobraman04-vs-ugososlo/35898/7):
>
> you drilled a hole?

No I didn’t drill anything, in fact I left the vac ports you installed in the Suzuki injector ports (only because the pitch of the port is too extreme and would fire fuel into the floor of the runner so atomization would be teh suck).

There are tiny holes in the floor of each throttle body, that appear to bypass the plate, but there is nothing that could possiblly control them…unless the secondary butterflies on the GSX-R are what modulate the flow that seeps past the primaries:squint:

---

_[View the full topic](https://forums.speedlife.net/t/b18c-build-troubleshooting/196698)._