# Bad,bad,bad....... **URL:** \ **Category:** PittSpeed Automotive\ **Created:** [May 10, 2006, 8:33pm UTC](https://forums.speedlife.net/t/bad-bad-bad/182175 "2006-05-10T20:33:25Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![imported\_Sleeper](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/imported_sleeper/32/5939_2.png) [@imported\_Sleeper](https://forums.speedlife.net/u/imported_Sleeper)\ **Post date:** [May 10, 2006, 8:33pm UTC](https://forums.speedlife.net/t/bad-bad-bad/182175/1 "2006-05-10T20:33:25Z")
Well i am on my second motor in a month now,first wad due to oil prssure problem and second also. Well i got the new one running today and i have very bad misfires on #1 & #5 real bad. Now when i got the motor it must of been tipped b4 casue i pulled the manis off and a lil bit of oil came out of one. Now the motor is running like shit after the first satrt up,left it runnig for a lil bit to check my oil pressure on AM gauge and fine(60) pounds. Ran rough so i scanned it and found the misfires. Now i changed the coil pack,moved wires around,stole wires form the impala and put on,changed plugs and changed fuel injectors 1 and 5. No help… Now in this motor b4 i put it in i threw in a cam,springs and rollmaster set,timing is set up right and put it back together. Pullef first plugs off after 10 mins of running at idle and two were lil wet so i replaced em,no avail! So what could be causing this? :stick: ---
**Author:** ![Streetnstrip](https://avatars.discourse-cdn.com/v4/letter/s/7bcc69/32.png) [@Streetnstrip](https://forums.speedlife.net/u/Streetnstrip)\ **Post date:** [May 11, 2006, 1:19am UTC](https://forums.speedlife.net/t/bad-bad-bad/182175/2 "2006-05-11T01:19:58Z")
left u a reply on [SNSPerformance.org](http://SNSPerformance.org) if need to call me later today. ---
**Author:** ![A468Bu](https://avatars.discourse-cdn.com/v4/letter/a/278dde/32.png) [@A468Bu](https://forums.speedlife.net/u/A468Bu)\ **Post date:** [May 11, 2006, 11:33am UTC](https://forums.speedlife.net/t/bad-bad-bad/182175/3 "2006-05-11T11:33:04Z")
Compression check and leak down check ---
**Author:** ![fmfkid250](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/fmfkid250/32/5973_2.png) [@fmfkid250](https://forums.speedlife.net/u/fmfkid250)\ **Post date:** [May 11, 2006, 2:27pm UTC](https://forums.speedlife.net/t/bad-bad-bad/182175/4 "2006-05-11T14:27:33Z")
> [@A468Bu](#): > > Compression check and leak down check thats what i would do, remember you always used to harass me about blowen shit up, haha… ---
**Author:** ![04AspenWhiteWRX](https://avatars.discourse-cdn.com/v4/letter/0/9fc348/32.png) [@04AspenWhiteWRX](https://forums.speedlife.net/u/04AspenWhiteWRX)\ **Post date:** [May 11, 2006, 8:34pm UTC](https://forums.speedlife.net/t/bad-bad-bad/182175/5 "2006-05-11T20:34:05Z")
did u fix it yet? i called u before to see if u needed help but ur loser ass never called back lol. by the way im leaving in the morning for camp 2 cut grass ---
**Author:** ![imported\_Sleeper](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/imported_sleeper/32/5939_2.png) [@imported\_Sleeper](https://forums.speedlife.net/u/imported_Sleeper)\ **Post date:** [May 11, 2006, 9:56pm UTC](https://forums.speedlife.net/t/bad-bad-bad/182175/6 "2006-05-11T21:56:10Z")
I found a leak from the throttle body to supercharger,coolant runs through both,it wnet into my SC and down the drafts. That might be y i had bad misfires on 1 and 5. Went to retap it casue it was loose(throtle body stud) and it was a dissaster. Time for a new SC housing and SC rebuild. Coolant in the motor=spun bearing so i have to cleanse the motor too which menas,SC off,LIM off and clean oil through passages. So who knows now…BURN IT! ---
**Author:** ![Streetnstrip](https://avatars.discourse-cdn.com/v4/letter/s/7bcc69/32.png) [@Streetnstrip](https://forums.speedlife.net/u/Streetnstrip)\ **Post date:** [May 12, 2006, 1:00am UTC](https://forums.speedlife.net/t/bad-bad-bad/182175/7 "2006-05-12T01:00:22Z")
> [@SleeperGTP](#): > > I found a leak from the throttle body to supercharger,coolant runs through both,it wnet into my SC and down the drafts. That might be y i had bad misfires on 1 and 5. Went to retap it casue it was loose(throtle body stud) and it was a dissaster. Time for a new SC housing and SC rebuild. Coolant in the motor=spun bearing so i have to cleanse the motor too which menas,SC off,LIM off and clean oil through passages. So who knows now…BURN IT! Hey devin I may have some parts for ya Ill know later today if I get the car I want all I have to say is fuck v6 motors I like my v8:boink ---
**Author:** ![imported\_Sleeper](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/imported_sleeper/32/5939_2.png) [@imported\_Sleeper](https://forums.speedlife.net/u/imported_Sleeper)\ **Post date:** [May 12, 2006, 8:55am UTC](https://forums.speedlife.net/t/bad-bad-bad/182175/8 "2006-05-12T08:55:05Z")
> [@Streetnstrip](#): > > Hey devin I may have some parts for ya Ill know later today if I get the car I want all I have to say is fuck v6 motors I like my v8:boink LOL…now what?..i,ll call u later sammy.