# Basic 300ZX Suspension Upgrade **URL:** \ **Category:** Canada Nissan Automotive\ **Created:** [April 16, 2007, 7:27pm UTC](https://forums.speedlife.net/t/basic-300zx-suspension-upgrade/133334 "2007-04-16T19:27:17Z")\ **Posts on this page:** 1\ **Showing post:** 17
**Author:** ![pcproa](https://avatars.discourse-cdn.com/v4/letter/p/c5a1d2/32.png) [@pcproa](https://forums.speedlife.net/u/pcproa)\ **Post date:** [May 20, 2007, 9:23am UTC](https://forums.speedlife.net/t/basic-300zx-suspension-upgrade/133334/17 "2007-05-20T09:23:34Z")
And the coilovers. Very nice quality. > [@Good MP3 player to buy?](https://forums.speedlife.net/t/good-mp3-player-to-buy/1574/2): > > Looks good Patrick!! > When you put on those front upper adjustable control arms make sure the thicker adjustable part of the unit is to the outside furthest away from the bulkhead of the fender well. The section to the bottom of the pic is the thickest and should be situated furthest away from the bulkhead to prevent rubbing and making contact with the fender well mount. There’s a thread on this in [www.300zxClub.com](http://www.300zxClub.com) where even a very expensive set was seen to be making contact with the inner arm mount. > I’m sure you’ll figure that out when it’s installed anyway. > Looking good. :R Yup. When I was putting it on I made sure of it. Thanks :R . Pictures to come in the next couple days of front and back all put together. The setup is very nice now, I just have to play with dampening and coilover height. Big brakes on next and the parts for the TT swap should be leaking in over the next few days. --- _[View the full topic](https://forums.speedlife.net/t/basic-300zx-suspension-upgrade/133334)._