# Basic 300ZX Suspension Upgrade **URL:** \ **Category:** Canada Nissan Automotive\ **Created:** [April 16, 2007, 7:27pm UTC](https://forums.speedlife.net/t/basic-300zx-suspension-upgrade/133334 "2007-04-16T19:27:17Z")\ **Posts on this page:** 1\ **Showing post:** 21
**Author:** ![pcproa](https://avatars.discourse-cdn.com/v4/letter/p/c5a1d2/32.png) [@pcproa](https://forums.speedlife.net/u/pcproa)\ **Post date:** [September 1, 2007, 9:36am UTC](https://forums.speedlife.net/t/basic-300zx-suspension-upgrade/133334/21 "2007-09-01T09:36:25Z")
> [@FS: 2000 Mazda Millenia S, ME Sthrn Car. Custom sound](https://forums.speedlife.net/t/fs-2000-mazda-millenia-s-me-sthrn-car-custom-sound/1591/2): > > Sounds and looking good Patrick :R Yes, the higher grade bolts are a must for the adjustable control arms. Have you made a few checks of the front adjustable control arms to make sure they’re not making any contact with the control arm mount? Like Hanzzz mentioned before, don’t want to ride too much with severe negative camber else the insides of the tires will get smoked. Next stop - an alignment shop to get everything squared away. There’s no contact on the upper control mounts. I put the upper bulkheads on the control arms in the proper direction on both sides so I’m good. Here I am now ![http://i117.photobucket.com/albums/o69/pcproa/Suspension/PICT0005.jpg](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/3X/d/8/d8a4627a366a0b218555e8e16834a1e70385ba0c.jpeg) - Adjustable Coilovers - Adjustable Upper Control Arms - Adjustable Oversized Tension Rods - Stainless Steel Braided Brake Lines - 13" Big Brake Rotor Upgrade with aluminum hat (These brakes are half the weight of my stock brakes and cut my stopping distance in half) I think that’s it with suspension now. All I have to worry about are pads… Or maybe even upgrading my rear rotors to drilled and slotted so it can match the front. --- _[View the full topic](https://forums.speedlife.net/t/basic-300zx-suspension-upgrade/133334)._