# Basic 300ZX Suspension Upgrade **URL:** \ **Category:** Canada Nissan Automotive\ **Created:** [April 16, 2007, 7:27pm UTC](https://forums.speedlife.net/t/basic-300zx-suspension-upgrade/133334 "2007-04-16T19:27:17Z")\ **Posts on this page:** 1\ **Showing post:** 5
**Author:** ![jschrauwen](https://avatars.discourse-cdn.com/v4/letter/j/a88e4f/32.png) [@jschrauwen](https://forums.speedlife.net/u/jschrauwen)\ **Post date:** [April 16, 2007, 8:54pm UTC](https://forums.speedlife.net/t/basic-300zx-suspension-upgrade/133334/5 "2007-04-16T20:54:59Z")
> [@Formula \> C6](https://forums.speedlife.net/t/formula-c6/1405/14): > > When you got the alignment, did you dial in factory settings or do your own stuff? Patrick - Went for the factory settings. All of the critical tolerances were achieved. I’ll take a pic of the alignment print-out and post later. > [@CALLING OUT:94BlackLS](https://forums.speedlife.net/t/calling-out-94blackls/1388/24): > > nice, I’ve got AGX’s as well for my sentra, waiting on a GB for my springs tho… Both are available on Ebay most of the time and at reasonable prices too. > [@On another topic](https://forums.speedlife.net/t/1403/8): > > Hope to see and discuss your suspension in person soon. My 1991 is due for same kind of repair/care. Sounds good!! I’ve got the initial settings at 2 (out of 4) for the front and 4 (out of 8) on the rear. Noticeable difference over previous suspension set-up. Much stiffer at present and I’m thinking of taking the settings down to 1 on front and 2 on the rear and see how that feels. I still have to install my strut brace. ![http://i11.ebayimg.com/04/i/06/19/f7/41_1.JPG](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/3X/4/d/4dcb57651a75abfd07fb36c70c6c5108c49bdb34.jpeg) ![http://i24.ebayimg.com/03/i/06/20/fc/f1_1.JPG](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/3X/4/d/4dcb57651a75abfd07fb36c70c6c5108c49bdb34.jpeg) ![http://i11.ebayimg.com/05/i/06/19/f7/47_1.JPG](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/3X/4/d/4dcb57651a75abfd07fb36c70c6c5108c49bdb34.jpeg) --- _[View the full topic](https://forums.speedlife.net/t/basic-300zx-suspension-upgrade/133334)._