# bee\*R Rev Limiters **URL:** \ **Category:** Classifieds\ **Created:** [February 4, 2008, 8:17am UTC](https://forums.speedlife.net/t/bee-r-rev-limiters/112921 "2008-02-04T08:17:20Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![Keez](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/keez/32/5570_2.png) [@Keez](https://forums.speedlife.net/u/Keez)\ **Post date:** [February 4, 2008, 8:17am UTC](https://forums.speedlife.net/t/bee-r-rev-limiters/112921/1 "2008-02-04T08:17:20Z")
Hey i got in contact with a dealer online, i can get bee\*R rev limiters to my house for CAD 245.01 thats just if i ship one, from rhdjapan, the cheapest place i have seen these. so if i get quite a few, then we are all saving a few bucks on shipping. here is the scooop on the limiter BRAND NEW Rev Limitter by BEE-R for a virtually any 4-cylinder, 6-cylinder and Rotary Engine equipped vehicles. The item is designed to prevent over revving by cutting ignition and thus producing an open flame Rat the exhaust. Please note that the flame will not be produced with vehicles still using the OEM catalytic and those using a silencer at the tip of your aftermarket muffler. Full instructions on installation, disclaimer along with videos are available on BEE-R `s website at ([http://www.bee-r.com/english/revlimitter/inde.htm](http://www.bee-r.com/english/revlimitter/inde.htm)). The 3 dial knobs on the head unit will do the following adjustments: RED KNOB `REV 1`: This will set the Rev Limiter 16 adjustment from 0~F. 0=2500rpm with an increase in 500rpm for each additional turn in the knob. WHITE KNOB `REV 2`: The signal for this knob is set while the E-BRAKE is engaged. GAIN KNOB: This knob will increase or decrease the `impact` of the flame/sound from the exhaust. With the setting as zero the item will be turned off and will increase as the knob dial is set. This is a great unit to stand out at the weekend meets, drag strip, drift competitions or car shows!! Every unit set will come with new connectors, a `BEE-R` sticker and full color pamphlet on the Rev Limiter. We will also be more than happy to send the manual with translation of the necessary areas. from bee\*R these things cost 24,800 Japanese yen = 231.174802 Canadian dollarsand they have NONE in stock for nissan also i have seen this thing posted used on NICO club for 250.00 plus shipping from new hamphere. [http://forums.nicoclub.com/zerothread/281313](http://forums.nicoclub.com/zerothread/281313) _quoted from Bee_R website after some translation lol\* REBURIMITTA What is it? 設定回転数で点火をカットする装置。 Rotate set to cut the number of ignition device. 燃料カットでは無い為、燃料に火が付いて炎を発生したり、爆音を発したりする。 Not a cut for fuel and fuel to the flames with a fire occurred, and the roar of the script. なぜ点火カットか？ Why ignition cut? 高回転時に燃料カットが標準で機能しているが燃料をカットする事は、エンジンに強いダメージを与える事になる。 High turnover cut fuel standard when it is functioning to cut fuel it is the matter of damage to the engine to be strong. 特にターボ車は、 燃料が希薄になるとピストンの『棚落ち』が発生してエンジンブローにつながる。 Especially turbo cars, and fuel to dilute the piston dropout occurs, the engine and lead to blow. 最近のF1やGTレースカーは、点火カットを使用している。 GT recent F1 race car and the ignition using cut. ＮＥＷＳ NEWS ＨＯＭＥ HOME 定価 ２４８００円（税抜き） Fixed price 24,800 yen (tax excluded) 一部特注販売が御座います Some are selling bespoke御座います Videos for the non belivers and people who want to know whats up let the list start 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. $100.00 deposit lets get it on! ---
**Author:** ![duckJAI](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/duckjai/32/5553_2.png) [@duckJAI](https://forums.speedlife.net/u/duckJAI)\ **Post date:** [February 4, 2008, 8:34am UTC](https://forums.speedlife.net/t/bee-r-rev-limiters/112921/2 "2008-02-04T08:34:26Z")
this shit is sick here’s one on Tezuka’s BNR32 another one ---
**Author:** ![Pants](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pants/32/5590_2.png) [@Pants](https://forums.speedlife.net/u/Pants)\ **Post date:** [February 4, 2008, 11:14am UTC](https://forums.speedlife.net/t/bee-r-rev-limiters/112921/3 "2008-02-04T11:14:25Z")
ill get one but only if more people get one so i can save on shipping lol ---
**Author:** ![Fobwall](https://avatars.discourse-cdn.com/v4/letter/f/7ea924/32.png) [@Fobwall](https://forums.speedlife.net/u/Fobwall)\ **Post date:** [February 6, 2008, 4:52pm UTC](https://forums.speedlife.net/t/bee-r-rev-limiters/112921/4 "2008-02-06T16:52:02Z")
I already got one a while back for $233 CAD to my door. Didn’t have to pay anything extra. How much did you say the price would be if more people were to buy this? Oh yeah, it was brand new from Rhd japan too. ---
**Author:** ![NoSkillz](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/noskillz/32/5606_2.png) [@NoSkillz](https://forums.speedlife.net/u/NoSkillz)\ **Post date:** [February 6, 2008, 5:25pm UTC](https://forums.speedlife.net/t/bee-r-rev-limiters/112921/5 "2008-02-06T17:25:36Z")
i can’t see the instructions… is this thing a pain to wire? if i could get some detail on this i mite be able to make it. and if i can’t then il buy it from this gb 😛 ---
**Author:** ![BRIGGS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/briggs/32/5662_2.png) [@BRIGGS](https://forums.speedlife.net/u/BRIGGS)\ **Post date:** [February 6, 2008, 5:38pm UTC](https://forums.speedlife.net/t/bee-r-rev-limiters/112921/6 "2008-02-06T17:38:26Z")
damn ive been thinking about getting one of these for years!!! does anyone know how difficult it is to wire up? ---
**Author:** ![PureEuroM3](https://avatars.discourse-cdn.com/v4/letter/p/3bc359/32.png) [@PureEuroM3](https://forums.speedlife.net/u/PureEuroM3)\ **Post date:** [February 6, 2008, 5:48pm UTC](https://forums.speedlife.net/t/bee-r-rev-limiters/112921/7 "2008-02-06T17:48:01Z")
Put me down for one! ---
**Author:** ![BRIGGS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/briggs/32/5662_2.png) [@BRIGGS](https://forums.speedlife.net/u/BRIGGS)\ **Post date:** [February 6, 2008, 5:55pm UTC](https://forums.speedlife.net/t/bee-r-rev-limiters/112921/8 "2008-02-06T17:55:18Z")
yeaa fuck it, put me down for one too!!! how long will i have to wait to get it though? ---
**Author:** ![Singh](https://avatars.discourse-cdn.com/v4/letter/s/43a26b/32.png) [@Singh](https://forums.speedlife.net/u/Singh)\ **Post date:** [February 6, 2008, 6:30pm UTC](https://forums.speedlife.net/t/bee-r-rev-limiters/112921/9 "2008-02-06T18:30:49Z")
why does this remind me of initial d, LOL. Sounds sick tho. ---
**Author:** ![DirrtyDevo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dirrtydevo/32/5547_2.png) [@DirrtyDevo](https://forums.speedlife.net/u/DirrtyDevo)\ **Post date:** [February 6, 2008, 6:44pm UTC](https://forums.speedlife.net/t/bee-r-rev-limiters/112921/10 "2008-02-06T18:44:54Z")
Lovvin it! Just curious on the wiring schematic and what language its in? Id be down after some more lights spread on the subject Also does this a good limiter for the motor…? im not looking to risk damaging the motor…seing that rpm needle jumping violently scares me but im thinking that has to do with the unit throwing the ECU off and that the rpms arnt actually changing so suddenly…Hmm… ---
**Author:** ![Heatw](https://avatars.discourse-cdn.com/v4/letter/h/cdc98d/32.png) [@Heatw](https://forums.speedlife.net/u/Heatw)\ **Post date:** [February 6, 2008, 8:16pm UTC](https://forums.speedlife.net/t/bee-r-rev-limiters/112921/11 "2008-02-06T20:16:56Z")
its better for your engine than the stock limiter hahaha, also yes the tach bounces violently cause it’s shutting the ign off which the stock guage reads from hence no rpm ---
**Author:** ![Theo23](https://avatars.discourse-cdn.com/v4/letter/t/43a26b/32.png) [@Theo23](https://forums.speedlife.net/u/Theo23)\ **Post date:** [February 6, 2008, 8:20pm UTC](https://forums.speedlife.net/t/bee-r-rev-limiters/112921/12 "2008-02-06T20:20:28Z")
> [@MIGHTY](https://forums.speedlife.net/t/mighty/15842/8): > > Also does this a good limiter for the motor…? im not looking to risk damaging the motor… > [@callouts to get back in the loop](https://forums.speedlife.net/t/callouts-to-get-back-in-the-loop/15754/20): > > High turnover cut fuel standard when it is functioning to cut fuel it is the matter of damage to the engine to be strong. > 特にターボ車は、 燃料が希薄になるとピストンの『棚落ち』が発生してエンジンブローにつながる。 Especially turbo cars, and fuel to dilute the piston dropout occurs, the engine and lead to blow. What he is saying here, is that factory systems use fuel cut as a limiter, which is bad for a turbo motor due to leaning out, essentially, therefore weakening it. He then goes on to say how the pistons will fall out of the engine. So yeah, it will be safer than the factory system (if that is how nissan’s limiters work). ---
**Author:** ![schwiin\_27](https://avatars.discourse-cdn.com/v4/letter/s/ecb155/32.png) [@schwiin\_27](https://forums.speedlife.net/u/schwiin_27)\ **Post date:** [February 6, 2008, 8:37pm UTC](https://forums.speedlife.net/t/bee-r-rev-limiters/112921/13 "2008-02-06T20:37:32Z")
put me down for one . when would these be arriving?? useful link for wiring and setup - [http://www.driftworks.com/resources/bee-r-rev-limiter-fitting,16.html](http://www.driftworks.com/resources/bee-r-rev-limiter-fitting,16.html) ---
**Author:** ![Sky14](https://avatars.discourse-cdn.com/v4/letter/s/bcef8e/32.png) [@Sky14](https://forums.speedlife.net/u/Sky14)\ **Post date:** [February 6, 2008, 10:25pm UTC](https://forums.speedlife.net/t/bee-r-rev-limiters/112921/14 "2008-02-06T22:25:26Z")
i think im going to have to get one of these. ---
**Author:** ![Keez](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/keez/32/5570_2.png) [@Keez](https://forums.speedlife.net/u/Keez)\ **Post date:** [February 6, 2008, 11:14pm UTC](https://forums.speedlife.net/t/bee-r-rev-limiters/112921/15 "2008-02-06T23:14:53Z")
ok so list is this then , correct me if im wrong 1.PureEuroM3 2.sideways14 3.schwiin\_27 4.born2beaskyline as of five people i can buy it now. people either got to speak up. or not get one. im setting up my emt tomorow. ill pm you guys the details. [http://www.driftworks.com/resources/bee-r-rev-limiter-fitting,16.html](http://www.driftworks.com/resources/bee-r-rev-limiter-fitting,16.html) Pictured instructions, google is your friend. im also not making any money off of this, its just simple to deliver to one house and get people to pick them up. as stated before. if i can get 100.00 deposit ill order them. thanks for the interest you guys. ---
**Author:** ![NoSkillz](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/noskillz/32/5606_2.png) [@NoSkillz](https://forums.speedlife.net/u/NoSkillz)\ **Post date:** [February 7, 2008, 12:48am UTC](https://forums.speedlife.net/t/bee-r-rev-limiters/112921/16 "2008-02-07T00:48:19Z")
“There has been potential problems reported with Power FC users. The earth wiring may need to be reviewed for in some cases” Bahhh thats me… ah well no biggy, i think il get one… il post tonight if im on the list ---
**Author:** ![lewtz](https://avatars.discourse-cdn.com/v4/letter/l/439d5e/32.png) [@lewtz](https://forums.speedlife.net/u/lewtz)\ **Post date:** [February 7, 2008, 9:25am UTC](https://forums.speedlife.net/t/bee-r-rev-limiters/112921/17 "2008-02-07T09:25:45Z")
whens the deadline? ---
**Author:** ![Keez](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/keez/32/5570_2.png) [@Keez](https://forums.speedlife.net/u/Keez)\ **Post date:** [February 7, 2008, 10:31am UTC](https://forums.speedlife.net/t/bee-r-rev-limiters/112921/18 "2008-02-07T10:31:44Z")
im hoping to have these parts ordered for Feb. 29th. now i gotto go set up my emt. ---
**Author:** ![nwmrkt](https://avatars.discourse-cdn.com/v4/letter/n/aca169/32.png) [@nwmrkt](https://forums.speedlife.net/u/nwmrkt)\ **Post date:** [February 7, 2008, 10:39am UTC](https://forums.speedlife.net/t/bee-r-rev-limiters/112921/19 "2008-02-07T10:39:06Z")
so whats the main point of this thing? For “launching” purposes? ---
**Author:** ![Keez](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/keez/32/5570_2.png) [@Keez](https://forums.speedlife.net/u/Keez)\ **Post date:** [February 7, 2008, 12:24pm UTC](https://forums.speedlife.net/t/bee-r-rev-limiters/112921/20 "2008-02-07T12:24:37Z")
and it also limits your car alot better then the stock ecu cut off…as heatw said… this limiter cuts ignition instead of your stock ecu limiter that cuts fuel. lean=bad at high rpm for long periods of time. and yes its pretty much like a two step im also sure it works also as a anti-lag and will spool your turbo. maybe BAS can correct me on that but its what i have been told. and common…shooting huge flames?? how can you not want it. [Next page](https://forums.speedlife.net/t/bee-r-rev-limiters/112921.md?page=2)