# Bennyfizzle's dicktone 318i build thread.
**URL:** https://forums.speedlife.net/t/bennyfizzles-dicktone-318i-build-thread/234986
**Category:** Builds
**Created:** [October 23, 2007, 5:16am UTC](https://forums.speedlife.net/t/bennyfizzles-dicktone-318i-build-thread/234986 "2007-10-23T05:16:43Z")
**Posts on this page:** 20
**Page:** 29
### Author:  [@bennyfizzle](https://forums.speedlife.net/u/bennyfizzle)
#### Post date: [May 2, 2010, 7:36pm UTC](https://forums.speedlife.net/t/bennyfizzles-dicktone-318i-build-thread/234986/561 "2010-05-02T19:36:50Z")
It was wired when I got in there.
Is there really a ‘wrong’ way to safety wire something, obviously it could move more than if it were at the opposite angle but it’s sure not going anywhere.
I think I see some loctite dried to the threads too, which is cool.
---
### Author:  [@97cavy](https://forums.speedlife.net/u/97cavy)
#### Post date: [May 9, 2010, 12:38pm UTC](https://forums.speedlife.net/t/bennyfizzles-dicktone-318i-build-thread/234986/562 "2010-05-09T12:38:17Z")
Do work son!
---
### Author:  [@JClark](https://forums.speedlife.net/u/JClark)
#### Post date: [May 9, 2010, 12:46pm UTC](https://forums.speedlife.net/t/bennyfizzles-dicktone-318i-build-thread/234986/563 "2010-05-09T12:46:21Z")
What ever happened to this car? Did he sell it or is it in a barn somewhere?
---
### Author:  [@97cavy](https://forums.speedlife.net/u/97cavy)
#### Post date: [May 9, 2010, 12:50pm UTC](https://forums.speedlife.net/t/bennyfizzles-dicktone-318i-build-thread/234986/564 "2010-05-09T12:50:01Z")
I actually just saw benny doing some engine work
---
### Author:  [@Fn\_Skanks](https://forums.speedlife.net/u/Fn_Skanks)
#### Post date: [May 9, 2010, 4:12pm UTC](https://forums.speedlife.net/t/bennyfizzles-dicktone-318i-build-thread/234986/565 "2010-05-09T16:12:48Z")
^^ I hope this thing is gonna be done soon, I’ll even lend a hand if I gotta.
---
### Author:  [@car\_ramrod](https://forums.speedlife.net/u/car_ramrod)
#### Post date: [May 9, 2010, 6:51pm UTC](https://forums.speedlife.net/t/bennyfizzles-dicktone-318i-build-thread/234986/566 "2010-05-09T18:51:49Z")
hey my car ran tonight, literally just need to tie up a few ends and I officially become better than you
---
### Author:  [@bennyfizzle](https://forums.speedlife.net/u/bennyfizzle)
#### Post date: [May 9, 2010, 6:56pm UTC](https://forums.speedlife.net/t/bennyfizzles-dicktone-318i-build-thread/234986/567 "2010-05-09T18:56:00Z")
this car has raised my blood pressure like 14 points in the last 6 hours.
doing this shit for the first time primarily by yourself sucks lol.
big thanks while I can to Tom, Pete, Adam, Jesse, and Jon for dealing with my whining when i fuck up/multiple big favors from you guys, it means a lot.
had some annoying setbacks tonight, but im determined to slide this thing at the valley on saturday.
---
### Author:  [@car\_ramrod](https://forums.speedlife.net/u/car_ramrod)
#### Post date: [May 9, 2010, 7:01pm UTC](https://forums.speedlife.net/t/bennyfizzles-dicktone-318i-build-thread/234986/568 "2010-05-09T19:01:37Z")
hopefully you will be there friday when the drift event is going on
---
### Author:  [@TurboTravis](https://forums.speedlife.net/u/TurboTravis)
#### Post date: [May 9, 2010, 7:07pm UTC](https://forums.speedlife.net/t/bennyfizzles-dicktone-318i-build-thread/234986/569 "2010-05-09T19:07:17Z")
> [@Adobe Acrobat 8 Pro](https://forums.speedlife.net/t/adobe-acrobat-8-pro/31576/7):
>
> Isnt that safety wired the wrong way if its a right-hand thread? [/superhelpfullatetothepartyguy]
Although it’s nearly ‘neutral’, It’s safety wired correctly.
> [@Volleyball Tonight 7PM](https://forums.speedlife.net/t/volleyball-tonight-7pm/31554/38):
>
> It was wired when I got in there.
>
> Is there really a ‘wrong’ way to safety wire something, obviously it could move more than if it were at the opposite angle but it’s sure not going anywhere.
>
> I think I see some loctite dried to the threads too, which is cool.
You can absolutely safety wire something backwards. For example, if the loop that is around the sproket was at the 12 o’clock position, the wire would be doing nothing until the nut got WAY loose.
---
### Author:  [@ninety1two40](https://forums.speedlife.net/u/ninety1two40)
#### Post date: [May 9, 2010, 7:28pm UTC](https://forums.speedlife.net/t/bennyfizzles-dicktone-318i-build-thread/234986/570 "2010-05-09T19:28:58Z")
> [@I have $5.](https://forums.speedlife.net/t/i-have-5/31768/37):
>
> hopefully you will be there friday when the drift event is going on
:rofl
---
### Author:  [@JClark](https://forums.speedlife.net/u/JClark)
#### Post date: [May 9, 2010, 7:33pm UTC](https://forums.speedlife.net/t/bennyfizzles-dicktone-318i-build-thread/234986/571 "2010-05-09T19:33:24Z")
> [@Transformers: Live Action Movie](https://forums.speedlife.net/t/transformers-live-action-movie/31795/6):
>
> Although it’s nearly ‘neutral’, It’s safety wired correctly.
>
> You can absolutely safety wire something backwards. For example, if the loop that is around the sproket was at the 12 o’clock position, the wire would be doing nothing until the nut got WAY loose.
That’s what I mean, its a reverse thread (clockwise is loosen), so it can move clockwise and loosen up a few degrees before the wire would be under tension. Or am I missing something? …It’s late…
---
### Author:  [@skiboard06](https://forums.speedlife.net/u/skiboard06)
#### Post date: [May 9, 2010, 7:41pm UTC](https://forums.speedlife.net/t/bennyfizzles-dicktone-318i-build-thread/234986/572 "2010-05-09T19:41:19Z")
toss a small tack weld on there and this will end the debate
---
### Author:  [@TurboTravis](https://forums.speedlife.net/u/TurboTravis)
#### Post date: [May 9, 2010, 7:45pm UTC](https://forums.speedlife.net/t/bennyfizzles-dicktone-318i-build-thread/234986/573 "2010-05-09T19:45:51Z")
> [@Transformers: Live Action Movie](https://forums.speedlife.net/t/transformers-live-action-movie/31795/9):
>
> That’s what I mean, its a reverse thread (clockwise is loosen), so it can move clockwise and loosen up a few degrees before the wire would be under tension. Or am I missing something? …It’s late…
Your original post said it was right hand thread, which is not reverse thread. However, if it is reverse thread (which I call left hand thread), then yes, it’s safety wired backwards.
> [@AndyB first Honda Build 2007](https://forums.speedlife.net/t/andyb-first-honda-build-2007/31791/11):
>
> toss a small tack weld on there and this will end the debate
Horrible idea.
---
### Author:  [@JClark](https://forums.speedlife.net/u/JClark)
#### Post date: [May 9, 2010, 7:47pm UTC](https://forums.speedlife.net/t/bennyfizzles-dicktone-318i-build-thread/234986/574 "2010-05-09T19:47:29Z")
Whup, meant left.
---
### Author:  [@bennyfizzle](https://forums.speedlife.net/u/bennyfizzle)
#### Post date: [May 9, 2010, 7:50pm UTC](https://forums.speedlife.net/t/bennyfizzles-dicktone-318i-build-thread/234986/575 "2010-05-09T19:50:28Z")
lots of people have tack welded their nut, but never being able to remove the sprocket seems dumb to me.
---
### Author:  [@TurboTravis](https://forums.speedlife.net/u/TurboTravis)
#### Post date: [May 9, 2010, 7:52pm UTC](https://forums.speedlife.net/t/bennyfizzles-dicktone-318i-build-thread/234986/576 "2010-05-09T19:52:46Z")
> [@Fat boss vs chair \*vid\*](https://forums.speedlife.net/t/fat-boss-vs-chair-vid/31777/15):
>
> lots of people have tack welded their nut, but never being able to remove the sprocket seems dumb to me.
I see no reason for that, but I’d def install the safety wire correctly.
---
### Author:  [@bennyfizzle](https://forums.speedlife.net/u/bennyfizzle)
#### Post date: [May 9, 2010, 7:56pm UTC](https://forums.speedlife.net/t/bennyfizzles-dicktone-318i-build-thread/234986/577 "2010-05-09T19:56:01Z")
That I’m not worried about, there’s PLENTY of tension on the wire now, and the nut is tight and I can see some loctite ‘crustiness’.
new oil pan gasket is set, and the pans on, I’m not worried about it at all.
just need to get the pilot bearing out, and I think I have to buy ANOTHER RMS…I’ll check on it tomorrow.
---
### Author:  [@JClark](https://forums.speedlife.net/u/JClark)
#### Post date: [May 9, 2010, 7:56pm UTC](https://forums.speedlife.net/t/bennyfizzles-dicktone-318i-build-thread/234986/578 "2010-05-09T19:56:27Z")
OEM setup w/o safety wire has a history of backing off and killing motors. People like overkill solutions I guess.
---
### Author:  [@TurboTravis](https://forums.speedlife.net/u/TurboTravis)
#### Post date: [May 9, 2010, 7:57pm UTC](https://forums.speedlife.net/t/bennyfizzles-dicktone-318i-build-thread/234986/579 "2010-05-09T19:57:18Z")
> [@Saturn Vue](https://forums.speedlife.net/t/saturn-vue/31770/33):
>
> That I’m not worried about, there’s PLENTY of tension on the wire now, and the nut is tight and I can see some loctite ‘crustiness’.
>
> new oil pan gasket is set, and the pans on, I’m not worried about it at all.
>
> just need to get the pilot bearing out, and I think I have to buy ANOTHER RMS…I’ll check on it tomorrow.
LOL, you do realize that if the nut loosens, that tension will go away, right? The whole idea of safety wire is for the tension to remain/increase as a fastener loosens.
---
### Author:  [@bennyfizzle](https://forums.speedlife.net/u/bennyfizzle)
#### Post date: [May 9, 2010, 8:00pm UTC](https://forums.speedlife.net/t/bennyfizzles-dicktone-318i-build-thread/234986/580 "2010-05-09T20:00:19Z")
ok so it might loosen 10\*at most, it’s not going any further than that. Keep in mind **I did not** do the safety wire. It was done by Turner Motorsport in 2004, and it’s tight enough that I can’t visually deform the wire in any way. It’s definitely not not weighing heavily on my mind all thing’s considered.
[Previous page](https://forums.speedlife.net/t/bennyfizzles-dicktone-318i-build-thread/234986.md?page=28)
[Next page](https://forums.speedlife.net/t/bennyfizzles-dicktone-318i-build-thread/234986.md?page=30)