# Best clutch for SR20? **URL:** \ **Category:** Canada Nissan Automotive\ **Created:** [March 7, 2006, 2:06pm UTC](https://forums.speedlife.net/t/best-clutch-for-sr20/141741 "2006-03-07T14:06:15Z")\ **Posts on this page:** 13\ **Page:** 1
**Author:** ![stillslow](https://avatars.discourse-cdn.com/v4/letter/s/87869e/32.png) [@stillslow](https://forums.speedlife.net/u/stillslow)\ **Post date:** [March 7, 2006, 2:06pm UTC](https://forums.speedlife.net/t/best-clutch-for-sr20/141741/1 "2006-03-07T14:06:15Z")
I am wondering what you guys are running for clutchs and what you think of them? I am going to buy a new clutch shortly because I dont think the stock S13 clutch will take 300whp.I want something that is good for around 400whp because I am planning on going with a bigger turbo next year and dont want ot replace it again.I had an exedy stage 1 in my old civic and never had any problems.I am also thinking I might buy a flywheel as well .My setup is an S15 motor mated to an S13 tranny. My options are pretty much ACT Exedy Spec ---
**Author:** ![RS13](https://avatars.discourse-cdn.com/v4/letter/r/46a35a/32.png) [@RS13](https://forums.speedlife.net/u/RS13)\ **Post date:** [March 7, 2006, 2:40pm UTC](https://forums.speedlife.net/t/best-clutch-for-sr20/141741/2 "2006-03-07T14:40:18Z")
i have an RPS. I love it. It hodl about the same power as a spec stage 3 but it feels sooooo nice. The guys at apex loved it when they dyno’d my car. A little heavy for rush hour everyday, but i grabs so nice and you can still slip it. It is this one. Look at clutches under s13 and it is the RPS max series with the full disc. [http://www.splparts.com/](http://www.splparts.com/) Oh and everyone on zilvia loves it too ---
**Author:** ![stillslow](https://avatars.discourse-cdn.com/v4/letter/s/87869e/32.png) [@stillslow](https://forums.speedlife.net/u/stillslow)\ **Post date:** [March 7, 2006, 2:54pm UTC](https://forums.speedlife.net/t/best-clutch-for-sr20/141741/3 "2006-03-07T14:54:12Z")
Never heard of them before but it looks pretty good what did you pay for yours? ---
**Author:** ![RS13](https://avatars.discourse-cdn.com/v4/letter/r/46a35a/32.png) [@RS13](https://forums.speedlife.net/u/RS13)\ **Post date:** [March 7, 2006, 3:02pm UTC](https://forums.speedlife.net/t/best-clutch-for-sr20/141741/4 "2006-03-07T15:02:08Z")
I forget exacly abut 500. talk to autodream or our sponsors in town. ---
**Author:** ![sil\_eightyRPS13](https://avatars.discourse-cdn.com/v4/letter/s/2bfe46/32.png) [@sil\_eightyRPS13](https://forums.speedlife.net/u/sil_eightyRPS13)\ **Post date:** [March 7, 2006, 9:17pm UTC](https://forums.speedlife.net/t/best-clutch-for-sr20/141741/5 "2006-03-07T21:17:02Z")
whatevery it is, make sure its a 3-puck metalic or multi plate setup…anything else is truely infearior… 😛 ---
**Author:** ![jdms13rhd](https://avatars.discourse-cdn.com/v4/letter/j/f05b48/32.png) [@jdms13rhd](https://forums.speedlife.net/u/jdms13rhd)\ **Post date:** [March 8, 2006, 4:55am UTC](https://forums.speedlife.net/t/best-clutch-for-sr20/141741/6 "2006-03-08T04:55:49Z")
I just tryed somthing new this week for clutch combo and it works pretty good! I use the factory flywheel and pressure plate and I use a GTR clutch disc. I threw it in a SR20 Silvia 2 days ago and when I switch to second during a burn out I had NO slip at all and held it for a good 10 secs. Big burn out 🙂 It feels good slamming gears too. Not bad for a budgit performance mod! Feels like a Spec stage 2 but 1/5 the ammount of money. ---
**Author:** ![stillslow](https://avatars.discourse-cdn.com/v4/letter/s/87869e/32.png) [@stillslow](https://forums.speedlife.net/u/stillslow)\ **Post date:** [March 8, 2006, 1:40pm UTC](https://forums.speedlife.net/t/best-clutch-for-sr20/141741/7 "2006-03-08T13:40:14Z")
> [@sil\_eightyRPS13](#): > > whatevery it is, make sure its a 3-puck metalic or multi plate setup…anything else is truely infearior… 😛 3 puck would be pretty rough on the street wouldnt it? ---
**Author:** ![sil\_eightyRPS13](https://avatars.discourse-cdn.com/v4/letter/s/2bfe46/32.png) [@sil\_eightyRPS13](https://forums.speedlife.net/u/sil_eightyRPS13)\ **Post date:** [March 8, 2006, 4:38pm UTC](https://forums.speedlife.net/t/best-clutch-for-sr20/141741/8 "2006-03-08T16:38:13Z")
> [@Still\_slow](#): > > [quote=sil\_eightyRPS13]whatevery it is, make sure its a 3-puck metalic or multi plate setup…anything else is truely infearior… 😛 3 puck would be pretty rough on the street wouldnt it?[/quote] no not at all…even a mulitplate isnt bad on the street…ive run both… :tonqe: ---
**Author:** ![1mns13](https://avatars.discourse-cdn.com/v4/letter/1/8491ac/32.png) [@1mns13](https://forums.speedlife.net/u/1mns13)\ **Post date:** [March 8, 2006, 4:48pm UTC](https://forums.speedlife.net/t/best-clutch-for-sr20/141741/9 "2006-03-08T16:48:14Z")
I liked my ACT. Stiff pedal, strong grab. ---
**Author:** ![imported\_silvia](https://avatars.discourse-cdn.com/v4/letter/i/e79b87/32.png) [@imported\_silvia](https://forums.speedlife.net/u/imported_silvia)\ **Post date:** [March 8, 2006, 6:19pm UTC](https://forums.speedlife.net/t/best-clutch-for-sr20/141741/10 "2006-03-08T18:19:50Z")
Any thoughts on the differnce between 3pucks and 6 pucks?? Harsher/ feel the same with more grab? ---
**Author:** ![stillslow](https://avatars.discourse-cdn.com/v4/letter/s/87869e/32.png) [@stillslow](https://forums.speedlife.net/u/stillslow)\ **Post date:** [March 9, 2006, 3:15pm UTC](https://forums.speedlife.net/t/best-clutch-for-sr20/141741/11 "2006-03-09T15:15:34Z")
> [@1mns13](#): > > I liked my ACT. Stiff pedal, strong grab. What stage are you running? ---
**Author:** ![sil\_eightyRPS13](https://avatars.discourse-cdn.com/v4/letter/s/2bfe46/32.png) [@sil\_eightyRPS13](https://forums.speedlife.net/u/sil_eightyRPS13)\ **Post date:** [March 12, 2006, 2:58pm UTC](https://forums.speedlife.net/t/best-clutch-for-sr20/141741/12 "2006-03-12T14:58:12Z")
> [@silvia](#): > > Any thoughts on the differnce between 3pucks and 6 pucks?? Harsher/ feel the same with more grab? more pucks doesnt mean its stonger…the 3 puck is a killer setup to go with…most japanese ppl run them if they run a single plate setup… ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [March 14, 2006, 2:16pm UTC](https://forums.speedlife.net/t/best-clutch-for-sr20/141741/13 "2006-03-14T14:16:36Z")
i vote twin plate…streetable and will take all the abuse you hand it. but it might cost a bit much :roll: