# Best Muffler shop in Edmonton?? **URL:** \ **Category:** Canada Nissan Automotive\ **Created:** [April 6, 2005, 10:10pm UTC](https://forums.speedlife.net/t/best-muffler-shop-in-edmonton/138728 "2005-04-06T22:10:35Z")\ **Posts on this page:** 10\ **Page:** 1
**Author:** ![canadians14](https://avatars.discourse-cdn.com/v4/letter/c/58f4c7/32.png) [@canadians14](https://forums.speedlife.net/u/canadians14)\ **Post date:** [April 6, 2005, 10:10pm UTC](https://forums.speedlife.net/t/best-muffler-shop-in-edmonton/138728/1 "2005-04-06T22:10:35Z")
Anyone here have any experience with good muffler shops that have the ability to make a custom mandrel bent downpipe here in edmonton? Or if anyone knows where i could buy a 2.5in downpipe (KA24DE) off the internet that would be even better. Thx. ---
**Author:** ![1mns13](https://avatars.discourse-cdn.com/v4/letter/1/8491ac/32.png) [@1mns13](https://forums.speedlife.net/u/1mns13)\ **Post date:** [April 6, 2005, 10:15pm UTC](https://forums.speedlife.net/t/best-muffler-shop-in-edmonton/138728/2 "2005-04-06T22:15:49Z")
> [@canadians14](#): > > Anyone here have any experience with good muffler shops that have the ability to make a custom mandrel bent downpipe here in edmonton? Or if anyone knows where i could buy a 2.5in downpipe (KA24DE) off the internet that would be even better. Thx. I’d go 3" for teh downpipe. At the turbo, you want the largest amount of gases to leave. I’d try ABC or Speedworks. Mandrel bent tubing can be bought from B2B or warehouse services or gregg’s ---
**Author:** ![Buddyworm](https://avatars.discourse-cdn.com/v4/letter/b/85e7bf/32.png) [@Buddyworm](https://forums.speedlife.net/u/Buddyworm)\ **Post date:** [April 7, 2005, 2:03pm UTC](https://forums.speedlife.net/t/best-muffler-shop-in-edmonton/138728/3 "2005-04-07T14:03:36Z")
I’m not sure if this is true, but I read somewhere that the KA needs a bit of backpressure to make its torque further down in the rev band. I think it might adds some grunt near the top but I’m not sure. :rolleyes: Anyone got the downlow? B-Wurm 😃 ---
**Author:** ![1mns13](https://avatars.discourse-cdn.com/v4/letter/1/8491ac/32.png) [@1mns13](https://forums.speedlife.net/u/1mns13)\ **Post date:** [April 7, 2005, 4:37pm UTC](https://forums.speedlife.net/t/best-muffler-shop-in-edmonton/138728/4 "2005-04-07T16:37:27Z")
> [@Buddyworm](#): > > I’m not sure if this is true, but I read somewhere that the KA needs a bit of backpressure to make its torque further down in the rev band. I think it might adds some grunt near the top but I’m not sure. :rolleyes: Anyone got the downlow? > > B-Wurm 😃 all n/a engines need back pressure. ---
**Author:** ![canadians14](https://avatars.discourse-cdn.com/v4/letter/c/58f4c7/32.png) [@canadians14](https://forums.speedlife.net/u/canadians14)\ **Post date:** [April 7, 2005, 5:51pm UTC](https://forums.speedlife.net/t/best-muffler-shop-in-edmonton/138728/5 "2005-04-07T17:51:25Z")
I wish i could go with a 3in … especially with all the 3in silvia downpipes available… but the “pre-downpipe” i have that connects the turbo to the stock downpipe’s location is only 2.5 in… and i don’t know if i trust a muffler shop to make a replacement for it … especially since they’d need to weld in a EGR return … wastegate return… O2 bung… and still make it fit back on the car and not break … tough ---
**Author:** ![ozzmosis](https://avatars.discourse-cdn.com/v4/letter/o/439d5e/32.png) [@ozzmosis](https://forums.speedlife.net/u/ozzmosis)\ **Post date:** [April 7, 2005, 9:42pm UTC](https://forums.speedlife.net/t/best-muffler-shop-in-edmonton/138728/6 "2005-04-07T21:42:25Z")
We have built alot of 3" Downpipes and complete custom exhausts as a matter of fact. We use 100% mandrel bends and make it as strong as it needs to be. We’ve had no comebacks either. Give us a call next week to book it in: Speedworks Racing Development / Al’s Auto Salvage 447-3282 20004-107Ave Edmonton AB ---
**Author:** ![silvia\_s13](https://avatars.discourse-cdn.com/v4/letter/s/ac8455/32.png) [@silvia\_s13](https://forums.speedlife.net/u/silvia_s13)\ **Post date:** [April 7, 2005, 10:39pm UTC](https://forums.speedlife.net/t/best-muffler-shop-in-edmonton/138728/7 "2005-04-07T22:39:19Z")
Every muffler i have bought has been from Park Muffer in Sherwood Park. I just got a 2.5 inch magna flow for the d21 for $350 for everything. I asked if they gave car club discounts and they gave me $50 off. SO BECOME A MEMBER AND GET DISCOUTS!! ---
**Author:** ![Jay\_Nismo](https://avatars.discourse-cdn.com/v4/letter/j/c37758/32.png) [@Jay\_Nismo](https://forums.speedlife.net/u/Jay_Nismo)\ **Post date:** [April 7, 2005, 11:28pm UTC](https://forums.speedlife.net/t/best-muffler-shop-in-edmonton/138728/8 "2005-04-07T23:28:45Z")
> [@silvia\_s13](#): > > Every muffler i have bought has been from Park Muffer in Sherwood Park. I just got a 2.5 inch magna flow for the d21 for $350 for everything. I asked if they gave car club discounts and they gave me $50 off. SO BECOME A MEMBER AND GET DISCOUTS!! Discouts are very VERY similar to discounts!! :E ---
**Author:** ![canadians14](https://avatars.discourse-cdn.com/v4/letter/c/58f4c7/32.png) [@canadians14](https://forums.speedlife.net/u/canadians14)\ **Post date:** [April 9, 2005, 1:31pm UTC](https://forums.speedlife.net/t/best-muffler-shop-in-edmonton/138728/9 "2005-04-09T13:31:40Z")
Do you guys have any 3" SR downpipes in stock right now? ---
**Author:** ![Jay\_Nismo](https://avatars.discourse-cdn.com/v4/letter/j/c37758/32.png) [@Jay\_Nismo](https://forums.speedlife.net/u/Jay_Nismo)\ **Post date:** [April 10, 2005, 2:03am UTC](https://forums.speedlife.net/t/best-muffler-shop-in-edmonton/138728/10 "2005-04-10T02:03:44Z")
> [@canadians14](#): > > Do you guys have any 3" SR downpipes in stock right now? You’d have to contact Speedworks directly to find that out: Speedworks is located within Al’s Auto Salvage in the west end of Edmonton. 20004-107ave 488-2544 A Membership gets you a discount there!!