# Bings.ca Projects for 2006 **URL:** \ **Category:** Vendor Marketplace\ **Created:** [March 16, 2006, 3:54pm UTC](https://forums.speedlife.net/t/bings-ca-projects-for-2006/93902 "2006-03-16T15:54:10Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\ **Post date:** [March 16, 2006, 3:54pm UTC](https://forums.speedlife.net/t/bings-ca-projects-for-2006/93902/1 "2006-03-16T15:54:10Z")
I am going to discuss a little bit of what is planned for this coming year for product offerings on the site. firstly, the multi-link. It has been going great, i cant even tell you… i am back ordered on it right now and the gear just keeps getting better and better. i just picked up the spacers for the rod ends, machined aluminum now, they will never rust and wil lsave an ounce of weight or two. also, i am being strongly urged to commit to an off-shoot project and all but gave in today. We’ve decided to add a crazy RUCA to the development list. It will be made out of 1/2" thick Billet Aluminum with aluminum spacers and teh craziest aluminum rod ends i can buy… it wont look anything like the current RUCA and it will be hard anodized by AeroQuip… its going to be gangster… no idea what it is going to cost but expect it to be double what the current RUCA is. Also, i we are going to develop our very own SR20DET intake manifold from scratch, velocity stacks and all… this project starts next week. there is also alot of talk about an exhaust manifold but i think it might be a bit too difficult. the VR4 conversion brackets are about to begin and i have been toying with the idea of doing the fender braces again. The key is volume. This multi-link has turned into a product that people are talking about all over the continent, as a result it proves that there is a market for well designed, quality items developed and built in Canada. the guys at the shop are particularly excited because it is an interesting addition to their production that is not very competitive right now. its gotten to the point where i dont have to come up with the ideas and push to get it done… now i talk about it and the shop pushes me to get it done…lol expect to see bings.ca gear representing Canada’s premier 240sx’s in all forms of race and show this year and in years to come. if you have any suggestions for products or ventures let them be known ---
**Author:** ![NeveR](https://avatars.discourse-cdn.com/v4/letter/n/e95f7d/32.png) [@NeveR](https://forums.speedlife.net/u/NeveR)\ **Post date:** [March 16, 2006, 3:56pm UTC](https://forums.speedlife.net/t/bings-ca-projects-for-2006/93902/2 "2006-03-16T15:56:28Z")
A man with a plan. That’s what I like to hear. Keep up the good work! ---
**Author:** ![Axlerod](https://avatars.discourse-cdn.com/v4/letter/a/8edcca/32.png) [@Axlerod](https://forums.speedlife.net/u/Axlerod)\ **Post date:** [March 16, 2006, 5:32pm UTC](https://forums.speedlife.net/t/bings-ca-projects-for-2006/93902/3 "2006-03-16T17:32:26Z")
Nice, when do you expect the new style RUCAs to be finished? ---
**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\ **Post date:** [March 16, 2006, 6:45pm UTC](https://forums.speedlife.net/t/bings-ca-projects-for-2006/93902/4 "2006-03-16T18:45:09Z")
the Billet ones will likely cost in excess of $500 so i doubt you are considering buying them… i am going to have them engraved with my logo and run them on my car just to be a true baller few weeks i imagine ---
**Author:** ![Dxero](https://avatars.discourse-cdn.com/v4/letter/d/db5fbb/32.png) [@Dxero](https://forums.speedlife.net/u/Dxero)\ **Post date:** [March 16, 2006, 7:05pm UTC](https://forums.speedlife.net/t/bings-ca-projects-for-2006/93902/5 "2006-03-16T19:05:18Z")
Great stuff man, goodluck with everything. If you make you’re own shirts or hats, I’ll definately wear those. 😃 ---
**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\ **Post date:** [March 16, 2006, 7:20pm UTC](https://forums.speedlife.net/t/bings-ca-projects-for-2006/93902/6 "2006-03-16T19:20:23Z")
^^^…lol i am thinking i will do that actually. i’d rock it too ---
**Author:** ![Sasha\_SG](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sasha_sg/32/5477_2.png) [@Sasha\_SG](https://forums.speedlife.net/u/Sasha_SG)\ **Post date:** [March 16, 2006, 7:43pm UTC](https://forums.speedlife.net/t/bings-ca-projects-for-2006/93902/7 "2006-03-16T19:43:28Z")
and everythings gonna be tested on my car 🙂 yay ---
**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\ **Post date:** [March 16, 2006, 8:02pm UTC](https://forums.speedlife.net/t/bings-ca-projects-for-2006/93902/8 "2006-03-16T20:02:14Z")
man, every day i come up with new ways to make this stuff better… in the next couple weeks i will be reducing the weight of the multi-link components a little bit… help sasha trim some seconds off his laptimes ---
**Author:** ![TM1](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/tm1/32/5517_2.png) [@TM1](https://forums.speedlife.net/u/TM1)\ **Post date:** [March 16, 2006, 9:29pm UTC](https://forums.speedlife.net/t/bings-ca-projects-for-2006/93902/9 "2006-03-16T21:29:53Z")
Aluminum eh… What grade? ---
**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\ **Post date:** [March 17, 2006, 6:57am UTC](https://forums.speedlife.net/t/bings-ca-projects-for-2006/93902/10 "2006-03-17T06:57:39Z")
not sure yet, but i will be running them on my own car only for a while ---
**Author:** ![dacatz](https://avatars.discourse-cdn.com/v4/letter/d/779978/32.png) [@dacatz](https://forums.speedlife.net/u/dacatz)\ **Post date:** [March 17, 2006, 11:14pm UTC](https://forums.speedlife.net/t/bings-ca-projects-for-2006/93902/11 "2006-03-17T23:14:12Z")
r u going to make some hard inner and tie rod end? ---
**Author:** ![a\_ahmed](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/a_ahmed/32/5411_2.png) [@a\_ahmed](https://forums.speedlife.net/u/a_ahmed)\ **Post date:** [March 18, 2006, 1:49am UTC](https://forums.speedlife.net/t/bings-ca-projects-for-2006/93902/12 "2006-03-18T01:49:19Z")
A man without a plan plans to fail, so a man with a plan gotta be a smart man or something something _runs_ Cool… ---
**Author:** ![overboosted](https://avatars.discourse-cdn.com/v4/letter/o/2acd7d/32.png) [@overboosted](https://forums.speedlife.net/u/overboosted)\ **Post date:** [March 19, 2006, 9:38am UTC](https://forums.speedlife.net/t/bings-ca-projects-for-2006/93902/13 "2006-03-19T09:38:17Z")
hey guys, Bing, did you get the Pm i sent you about maybe looking into making hard swaybar end links?? i think you could make them rather easy since you have the access to the heim joints. just an idea, cuz id like to buy some, and i could build my own, but dont feel like going threw the hassle of buying some good heim joints from the states, i hear its a hasssle. thanks, Rob ---
**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\ **Post date:** [March 19, 2006, 9:51am UTC](https://forums.speedlife.net/t/bings-ca-projects-for-2006/93902/14 "2006-03-19T09:51:05Z")
[http://bings.ca/images/frontsuspension1](http://bings.ca/images/frontsuspension1) we already did that 2 years ago… i will be having the brackets made up professionally and putting them to market soon… for the front only for now ---
**Author:** ![overboosted](https://avatars.discourse-cdn.com/v4/letter/o/2acd7d/32.png) [@overboosted](https://forums.speedlife.net/u/overboosted)\ **Post date:** [March 19, 2006, 10:04am UTC](https://forums.speedlife.net/t/bings-ca-projects-for-2006/93902/15 "2006-03-19T10:04:08Z")
ok sorry i havent been around that long to know you guys did them already. are they avalible?? ---
**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\ **Post date:** [March 19, 2006, 10:21am UTC](https://forums.speedlife.net/t/bings-ca-projects-for-2006/93902/16 "2006-03-19T10:21:36Z")
not right now, however, i did just order a few of those rod ends that will arrive next week in preparation for starting up production on them again ---
**Author:** ![dacatz](https://avatars.discourse-cdn.com/v4/letter/d/779978/32.png) [@dacatz](https://forums.speedlife.net/u/dacatz)\ **Post date:** [March 19, 2006, 2:40pm UTC](https://forums.speedlife.net/t/bings-ca-projects-for-2006/93902/17 "2006-03-19T14:40:15Z")
cool…wait for your good news…btw i need inner and outer (a set) for my s14…and i will be the first customer to get one… ---
**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\ **Post date:** [March 19, 2006, 2:58pm UTC](https://forums.speedlife.net/t/bings-ca-projects-for-2006/93902/18 "2006-03-19T14:58:01Z")
by inner and outter i assume you mean tie rods, which i dont do. ---
**Author:** ![overboosted](https://avatars.discourse-cdn.com/v4/letter/o/2acd7d/32.png) [@overboosted](https://forums.speedlife.net/u/overboosted)\ **Post date:** [March 20, 2006, 8:11am UTC](https://forums.speedlife.net/t/bings-ca-projects-for-2006/93902/19 "2006-03-20T08:11:57Z")
have you thought about maybe making some hard tierod ends like tein makes? ---
**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\ **Post date:** [March 20, 2006, 11:21am UTC](https://forums.speedlife.net/t/bings-ca-projects-for-2006/93902/20 "2006-03-20T11:21:47Z")
nah, i couldnt make them any better or cheaper [Next page](https://forums.speedlife.net/t/bings-ca-projects-for-2006/93902.md?page=2)