# Bings Prototype 5x114.3 Wheel Adapters
**URL:** https://forums.speedlife.net/t/bings-prototype-5x114-3-wheel-adapters/115405
**Category:** Vendor Marketplace
**Created:** [May 10, 2008, 3:43pm UTC](https://forums.speedlife.net/t/bings-prototype-5x114-3-wheel-adapters/115405 "2008-05-10T15:43:41Z")
**Posts on this page:** 20
**Page:** 1
### Author:  [@bing](https://forums.speedlife.net/u/bing)
#### Post date: [May 10, 2008, 3:43pm UTC](https://forums.speedlife.net/t/bings-prototype-5x114-3-wheel-adapters/115405/1 "2008-05-10T15:43:41Z")
I have some new wheels going onto my coupe this year and in order to make them clear the coilovers and brakes i had to get adapters…
of course, i would never bolt silly china-adapters with janky studs and no hub-centric lip for the wheel so i had these made by CCF out of solid 6061 Billet aluminum
ARP extended studs pressed into the custom knurl. The hub centric lip will keep the wheel sitting perfectly centered on the adapters to the wheel hub and will also peek through as a built in center cap.
We did this as an excercise and are looking at manufacturing proper adapters with proper wheel studs but you dont even want to know what these cost to manufacture… this first set cost me several hundred dollars to build.
We are going to look at changing the design a bit to cut costs. These adapters are 30mm.
---
### Author:  [@rogerthat240](https://forums.speedlife.net/u/rogerthat240)
#### Post date: [May 10, 2008, 5:37pm UTC](https://forums.speedlife.net/t/bings-prototype-5x114-3-wheel-adapters/115405/2 "2008-05-10T17:37:32Z")
holy shit, bings’ first real “SHIZNIT” product that no one else has. Nice!
This is what I was asking you about in another thread haha! Awesome!
---
### Author:  [@ReeZer](https://forums.speedlife.net/u/ReeZer)
#### Post date: [May 10, 2008, 5:58pm UTC](https://forums.speedlife.net/t/bings-prototype-5x114-3-wheel-adapters/115405/3 "2008-05-10T17:58:39Z")
Those look pretty nice Bing.
---
### Author:  [@sidewayz240](https://forums.speedlife.net/u/sidewayz240)
#### Post date: [May 10, 2008, 6:17pm UTC](https://forums.speedlife.net/t/bings-prototype-5x114-3-wheel-adapters/115405/4 "2008-05-10T18:17:25Z")
Impressive.
---
### Author:  [@Pete\_FXT](https://forums.speedlife.net/u/Pete_FXT)
#### Post date: [May 10, 2008, 6:17pm UTC](https://forums.speedlife.net/t/bings-prototype-5x114-3-wheel-adapters/115405/5 "2008-05-10T18:17:55Z")
Sweet, looks good.
---
### Author:  [@sr20](https://forums.speedlife.net/u/sr20)
#### Post date: [May 10, 2008, 6:32pm UTC](https://forums.speedlife.net/t/bings-prototype-5x114-3-wheel-adapters/115405/6 "2008-05-10T18:32:16Z")
nice!! i wanted to make a similar one at work, but to adapt from 4 bolt to 5 bolt
---
### Author:  [@Adam\_s13](https://forums.speedlife.net/u/Adam_s13)
#### Post date: [May 10, 2008, 7:24pm UTC](https://forums.speedlife.net/t/bings-prototype-5x114-3-wheel-adapters/115405/7 "2008-05-10T19:24:18Z")
> [@On another topic](https://forums.speedlife.net/t/16949/30):
>
> nice!! i wanted to make a similar one at work, but to adapt from 4 bolt to 5 bolt
And that’s golden idea, do it, make that third million man.
---
### Author:  [@B\_Hebert](https://forums.speedlife.net/u/B_Hebert)
#### Post date: [May 10, 2008, 8:52pm UTC](https://forums.speedlife.net/t/bings-prototype-5x114-3-wheel-adapters/115405/8 "2008-05-10T20:52:20Z")
whats the point of putting extended wheel studs in 30 mm spacers??? This would be the first thing i get rid of as it to me is pretty useless IMO. +1 for better quality studs although.
let me know binger im interested in a pair of 30mm, they look sick!!
---
### Author:  [@jed240](https://forums.speedlife.net/u/jed240)
#### Post date: [May 10, 2008, 9:40pm UTC](https://forums.speedlife.net/t/bings-prototype-5x114-3-wheel-adapters/115405/9 "2008-05-10T21:40:53Z")
wat abt us 4luggers?
---
### Author:  [@Gonad](https://forums.speedlife.net/u/Gonad)
#### Post date: [May 11, 2008, 1:32am UTC](https://forums.speedlife.net/t/bings-prototype-5x114-3-wheel-adapters/115405/10 "2008-05-11T01:32:20Z")
Make conversion adapters too like 5x120 for BMW wheels 😃
---
### Author:  [@rogerthat240](https://forums.speedlife.net/u/rogerthat240)
#### Post date: [May 11, 2008, 4:49am UTC](https://forums.speedlife.net/t/bings-prototype-5x114-3-wheel-adapters/115405/11 "2008-05-11T04:49:49Z")
^That would be sick.
---
### Author:  [@Happy240sx](https://forums.speedlife.net/u/Happy240sx)
#### Post date: [May 11, 2008, 4:55am UTC](https://forums.speedlife.net/t/bings-prototype-5x114-3-wheel-adapters/115405/12 "2008-05-11T04:55:18Z")
Bing, I can’t beleive I didn’t think of this. I need a set of those that go from 6 bolt to 5 bolt for my Viper customers. Can you make it happen…get me on MSN
---
### Author:  [@bing](https://forums.speedlife.net/u/bing)
#### Post date: [May 11, 2008, 8:28am UTC](https://forums.speedlife.net/t/bings-prototype-5x114-3-wheel-adapters/115405/13 "2008-05-11T08:28:14Z")
unless you are prepared to spend $600+ on a set of custom adapters you are not getting them…lol
the ARP extended studs are stronger that china studs and actually cheaper than OEM studs for this application. the 12 x 1.25 studs are not though… plus, when you have them in a 30mm adapter you need some length to bring them through.
i could have them seat further into the adapter, but then you couldnt press in with an arbor press like your supposed to.
---
### Author:  [@Silvia\_Drift](https://forums.speedlife.net/u/Silvia_Drift)
#### Post date: [May 13, 2008, 10:52am UTC](https://forums.speedlife.net/t/bings-prototype-5x114-3-wheel-adapters/115405/14 "2008-05-13T10:52:19Z")
They look great Bing!
Make some 4 lug 15mm adapters at a competitive price and I will buy them :).
---
### Author:  [@Fobwall](https://forums.speedlife.net/u/Fobwall)
#### Post date: [May 13, 2008, 11:57am UTC](https://forums.speedlife.net/t/bings-prototype-5x114-3-wheel-adapters/115405/15 "2008-05-13T11:57:23Z")
I have to admit, they actually look pretty good
---
### Author:  [@system](https://forums.speedlife.net/u/system)
#### Post date: [May 19, 2008, 6:47am UTC](https://forums.speedlife.net/t/bings-prototype-5x114-3-wheel-adapters/115405/16 "2008-05-19T06:47:39Z")
These are pure hottness… but I think If you make the 4 bolt \>\> 5 Bolt ones they will sell like hotcakes Even in the states . Ps I get a discount for saying that when they come out. lol I need some
---
### Author:  [@Solarian](https://forums.speedlife.net/u/Solarian)
#### Post date: [May 19, 2008, 8:46am UTC](https://forums.speedlife.net/t/bings-prototype-5x114-3-wheel-adapters/115405/17 "2008-05-19T08:46:33Z")
Figure out a more economical way to make these, and I’ll buy 4. My stockies are sunk as shit.
---
### Author:  [@bing](https://forums.speedlife.net/u/bing)
#### Post date: [May 19, 2008, 8:49am UTC](https://forums.speedlife.net/t/bings-prototype-5x114-3-wheel-adapters/115405/18 "2008-05-19T08:49:13Z")
just use regular spacers… frig.
---
### Author:  [@DarkManX](https://forums.speedlife.net/u/DarkManX)
#### Post date: [May 19, 2008, 3:23pm UTC](https://forums.speedlife.net/t/bings-prototype-5x114-3-wheel-adapters/115405/19 "2008-05-19T15:23:43Z")
They look beautiful Bing. I’d love if you made 4 lug to 5 lug tho.
p.s i have a few things to tell you regarding Carstar. All I have to say is thank you.
-DK
---
### Author:  [@Slide\_Junkie](https://forums.speedlife.net/u/Slide_Junkie)
#### Post date: [June 1, 2008, 7:34pm UTC](https://forums.speedlife.net/t/bings-prototype-5x114-3-wheel-adapters/115405/20 "2008-06-01T19:34:32Z")
Make a set of these in 4 bolt and Im down for sure!!!
( not 4 - 5 ) just straight 4 bolt 35m bolt ons!!
Get them and Ill get some wide rear fenders to with it!!
Keep up the good work fella and its good to see your becoming an innovator in this scene!!!