# Bings Tension Control Rod - Prototypes **URL:** \ **Category:** Bings.ca\ **Created:** [February 22, 2007, 3:36pm UTC](https://forums.speedlife.net/t/bings-tension-control-rod-prototypes/103973 "2007-02-22T15:36:12Z")\ **Posts on this page:** 20\ **Page:** 2
**Author:** ![flyingchicken](https://avatars.discourse-cdn.com/v4/letter/f/ac91a4/32.png) [@flyingchicken](https://forums.speedlife.net/u/flyingchicken)\ **Post date:** [February 25, 2007, 1:34pm UTC](https://forums.speedlife.net/t/bings-tension-control-rod-prototypes/103973/21 "2007-02-25T13:34:56Z")
wtf, wheres the price yo? unless my glasses aren’t working…shiiit ---
**Author:** ![sidewayz240](https://avatars.discourse-cdn.com/v4/letter/s/e99b99/32.png) [@sidewayz240](https://forums.speedlife.net/u/sidewayz240)\ **Post date:** [February 25, 2007, 2:07pm UTC](https://forums.speedlife.net/t/bings-tension-control-rod-prototypes/103973/22 "2007-02-25T14:07:04Z")
> [@Anyone want to go to Lancaster Drag Strip tomorrow????](https://forums.speedlife.net/t/anyone-want-to-go-to-lancaster-drag-strip-tomorrow/11506/4): > > wtf, wheres the price yo? unless my glasses aren’t working…shiiit > [@Bing](#): > > Price will be $220 - $225 shipped get new glasses, lol. ---
**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\ **Post date:** [February 25, 2007, 3:55pm UTC](https://forums.speedlife.net/t/bings-tension-control-rod-prototypes/103973/23 "2007-02-25T15:55:33Z")
> [@Great Series Photos from VIR/GrandAM](https://forums.speedlife.net/t/great-series-photos-from-vir-grandam/11505/3): > > i mainly support bings products the most with this statement… its Canadian goods… in fact it is indeed very strong and well made and competitive with other brand name products… i have the experience of using his products on track before and also saving money from replacement parts Yes Season has first hand knowledge of the value in buying local… if he had any other multi-link on his car he would have had to buy it all over again even though he only hit one side of his car…that would translate into a loss of upwards of $900 if he had SPL or BV on his car and even more if he used Tanabe or Cusco. I have also addressed all of Samson’s concerns, however, in the interest of professional courtesy and not revelaing the competitve secrets of other companies i will not go into detail in public. Needless to say, there should be no concerns about R&D or the price point of the items relative to anything else on the market. ---
**Author:** ![jammin1911](https://avatars.discourse-cdn.com/v4/letter/j/a9a28c/32.png) [@jammin1911](https://forums.speedlife.net/u/jammin1911)\ **Post date:** [February 25, 2007, 5:13pm UTC](https://forums.speedlife.net/t/bings-tension-control-rod-prototypes/103973/24 "2007-02-25T17:13:50Z")
The rods look really good bing. If I hadn’t already purchased BV a while back I’d be on this for sure. Next time, I know where to go. Hopefully one day you will rid yourself of the “copies only” reputation that you’ve managed to build Bings.ca - People will eventually realize that your Canadian Made products are another legitimate competitor in the mass marketplace alongside the [currently] bigger name products. ---
**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\ **Post date:** [February 25, 2007, 6:08pm UTC](https://forums.speedlife.net/t/bings-tension-control-rod-prototypes/103973/25 "2007-02-25T18:08:06Z")
its a local phenomenon because people know me personally… elsewhere people talk about alot of my gear the way we talk about companies like SPL and BV. And the people near those companies talk about the owners, not the products… kind of like the people around here who need to feel important about themselves and start drama about whatever… its boring side note, just today i was searching on some western canadian forums where they were talking about my R&D…lol ---
**Author:** ![jammin1911](https://avatars.discourse-cdn.com/v4/letter/j/a9a28c/32.png) [@jammin1911](https://forums.speedlife.net/u/jammin1911)\ **Post date:** [February 25, 2007, 6:43pm UTC](https://forums.speedlife.net/t/bings-tension-control-rod-prototypes/103973/26 "2007-02-25T18:43:15Z")
thats an interesting theory actually, and most of the retarded comments all of a sudden make sense. any other arms becoming available in the near future? ---
**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\ **Post date:** [February 25, 2007, 7:04pm UTC](https://forums.speedlife.net/t/bings-tension-control-rod-prototypes/103973/27 "2007-02-25T19:04:54Z")
im thinking about it… but there is some research i have to do before we start to design… ---
**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\ **Post date:** [February 27, 2007, 12:28pm UTC](https://forums.speedlife.net/t/bings-tension-control-rod-prototypes/103973/28 "2007-02-27T12:28:53Z")
colour switch… it’s all going to be red…like me logo ---
**Author:** ![Uniac](https://avatars.discourse-cdn.com/v4/letter/u/34f0e0/32.png) [@Uniac](https://forums.speedlife.net/u/Uniac)\ **Post date:** [February 27, 2007, 1:07pm UTC](https://forums.speedlife.net/t/bings-tension-control-rod-prototypes/103973/29 "2007-02-27T13:07:07Z")
ah man, red, now alex is really going to get pissed when he see’s your stuff. I’ve got a busted bushing, i may have to pick a set of these up from you. ---
**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\ **Post date:** [February 27, 2007, 1:25pm UTC](https://forums.speedlife.net/t/bings-tension-control-rod-prototypes/103973/30 "2007-02-27T13:25:21Z")
the gunmetal was going to take a few days to mix and take double the time = double the cost… red suits my logo more plus there is anothe rmajor client that uses this colour, Bicknell Racing, so i am going ot use their colour too. cut the price in half… not sure if it will be a long term thing… we’ll see. ---
**Author:** ![cloudzero3](https://avatars.discourse-cdn.com/v4/letter/c/2acd7d/32.png) [@cloudzero3](https://forums.speedlife.net/u/cloudzero3)\ **Post date:** [February 27, 2007, 5:08pm UTC](https://forums.speedlife.net/t/bings-tension-control-rod-prototypes/103973/31 "2007-02-27T17:08:34Z")
im down with red ---
**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\ **Post date:** [March 10, 2007, 2:09pm UTC](https://forums.speedlife.net/t/bings-tension-control-rod-prototypes/103973/32 "2007-03-10T14:09:11Z")
Guess what time it is? ![http://bings.ca/images/parts/tc.jpg](http://bings.ca/images/parts/tc.jpg) ![http://bings.ca/images/parts/tc1.jpg](http://bings.ca/images/parts/tc1.jpg) ![http://bings.ca/images/parts/tc2.jpg](http://bings.ca/images/parts/tc2.jpg) i will be at SG Motorsports tonite showing them off to some folks. first sets are going on my car and Jean Francois Chaisson from Drift Mania’s Team Onderground ---
**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\ **Post date:** [March 11, 2007, 12:15am UTC](https://forums.speedlife.net/t/bings-tension-control-rod-prototypes/103973/33 "2007-03-11T00:15:38Z")
Also… just to note, these are not yet ready for sale… i want to include install hardware with them and so i am going to do a bit more non-existant R&D that never gets done but somehow does… ---
**Author:** ![flyingchicken](https://avatars.discourse-cdn.com/v4/letter/f/ac91a4/32.png) [@flyingchicken](https://forums.speedlife.net/u/flyingchicken)\ **Post date:** [March 11, 2007, 8:06am UTC](https://forums.speedlife.net/t/bings-tension-control-rod-prototypes/103973/34 "2007-03-11T08:06:49Z")
bing, i noticed the triangle thing at SG, but i did not know what it was, and forgot to ask. so. what is that thing? fender brace? ---
**Author:** ![DJPyro](https://avatars.discourse-cdn.com/v4/letter/d/278dde/32.png) [@DJPyro](https://forums.speedlife.net/u/DJPyro)\ **Post date:** [March 11, 2007, 8:50am UTC](https://forums.speedlife.net/t/bings-tension-control-rod-prototypes/103973/35 "2007-03-11T08:50:49Z")
If it’s what I think it is, I’m pretty sure it’s a caliper relocation bracket for using different brakes. I thought he mentioned something about it on another thread I read. I could be wrong though. ---
**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\ **Post date:** [March 11, 2007, 10:15am UTC](https://forums.speedlife.net/t/bings-tension-control-rod-prototypes/103973/36 "2007-03-11T10:15:36Z")
yeah those are the VR4 caliper brackets… i wont be letting them go until i get them on a car first. ---
**Author:** ![steve\_o1989](https://avatars.discourse-cdn.com/v4/letter/s/6a8cbe/32.png) [@steve\_o1989](https://forums.speedlife.net/u/steve_o1989)\ **Post date:** [March 11, 2007, 7:24pm UTC](https://forums.speedlife.net/t/bings-tension-control-rod-prototypes/103973/37 "2007-03-11T19:24:02Z")
When do you think those tension rods will be ready to rock? I am going to be needing some coming up. Also, how much do you think a package of all 4 of the multilinks is going to run? ---
**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\ **Post date:** [March 11, 2007, 11:50pm UTC](https://forums.speedlife.net/t/bings-tension-control-rod-prototypes/103973/38 "2007-03-11T23:50:15Z")
no set time yet, i dont want to haste them to market… but be excited… very excited… i r ---
**Author:** ![a\_ahmed](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/a_ahmed/32/5411_2.png) [@a\_ahmed](https://forums.speedlife.net/u/a_ahmed)\ **Post date:** [March 17, 2007, 10:35pm UTC](https://forums.speedlife.net/t/bings-tension-control-rod-prototypes/103973/39 "2007-03-17T22:35:41Z")
bings are you going to build front lower control arms (copy ikeya arm design with roll center adjustment? Only other ppl who sell such arms are SPL). ---
**Author:** ![duckJAI](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/duckjai/32/5553_2.png) [@duckJAI](https://forums.speedlife.net/u/duckJAI)\ **Post date:** [March 18, 2007, 8:27am UTC](https://forums.speedlife.net/t/bings-tension-control-rod-prototypes/103973/40 "2007-03-18T08:27:12Z")
ikeya is the shit! ballers only. make them! [Previous page](https://forums.speedlife.net/t/bings-tension-control-rod-prototypes/103973.md?page=1) [Next page](https://forums.speedlife.net/t/bings-tension-control-rod-prototypes/103973.md?page=3)