# Bling Bling 2.0 Rods and 20v pistons y0

**URL:** <https://forums.speedlife.net/t/bling-bling-2-0-rods-and-20v-pistons-y0/8524>\
**Category:** NYSpeed Automotive\
**Created:** [February 23, 2006, 11:39am UTC](https://forums.speedlife.net/t/bling-bling-2-0-rods-and-20v-pistons-y0/8524 "2006-02-23T11:39:00Z")\
**Posts on this page:** 11\
**Page:** 2

<div class="post-metadata">

**Author:** ![2TurboZ](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/2turboz/32/7577_2.png) [@2TurboZ](https://forums.speedlife.net/u/2TurboZ)\
**Post date:** [February 24, 2006, 5:31pm UTC](https://forums.speedlife.net/t/bling-bling-2-0-rods-and-20v-pistons-y0/8524/21 "2006-02-24T17:31:52Z")

</div>

Listen to the Ravis (Serika) He is Piston Master of JE 🙂

---

<div class="post-metadata">

**Author:** ![ieatpaint](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ieatpaint/32/7311_2.png) [@ieatpaint](https://forums.speedlife.net/u/ieatpaint)\
**Post date:** [February 24, 2006, 6:14pm UTC](https://forums.speedlife.net/t/bling-bling-2-0-rods-and-20v-pistons-y0/8524/22 "2006-02-24T18:14:51Z")

</div>

I feel your pain about screw ups. I was sent the wrong engine bearings, so now I send them back and the ones I ordered are back-ordered, I’m SOL for a few weeks. Good luck though.

---

<div class="post-metadata">

**Author:** ![66impalass](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/66impalass/32/7429_2.png) [@66impalass](https://forums.speedlife.net/u/66impalass)\
**Post date:** [February 24, 2006, 6:33pm UTC](https://forums.speedlife.net/t/bling-bling-2-0-rods-and-20v-pistons-y0/8524/23 "2006-02-24T18:33:06Z")

</div>

measure it with a caliper to check, but i think that is just the casting nummber as well

---

<div class="post-metadata">

**Author:** ![Shrives](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shrives/32/7250_2.png) [@Shrives](https://forums.speedlife.net/u/Shrives)\
**Post date:** [February 24, 2006, 6:43pm UTC](https://forums.speedlife.net/t/bling-bling-2-0-rods-and-20v-pistons-y0/8524/24 "2006-02-24T18:43:19Z")

</div>

listen to hotrodkid…

are you keeping them then? i thought the plans were building it for next summer, so why not send them back and wait…

---

<div class="post-metadata">

**Author:** ![Shrives](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shrives/32/7250_2.png) [@Shrives](https://forums.speedlife.net/u/Shrives)\
**Post date:** [February 24, 2006, 6:45pm UTC](https://forums.speedlife.net/t/bling-bling-2-0-rods-and-20v-pistons-y0/8524/25 "2006-02-24T18:45:52Z")

</div>

edit: listen to serika too actually, that could be it…

---

<div class="post-metadata">

**Author:** ![HotRodKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/hotrodkid/32/7609_2.png) [@HotRodKid](https://forums.speedlife.net/u/HotRodKid)\
**Post date:** [February 24, 2006, 6:49pm UTC](https://forums.speedlife.net/t/bling-bling-2-0-rods-and-20v-pistons-y0/8524/26 "2006-02-24T18:49:34Z")

</div>

> [@Shrives](#):
>
> listen to hotrodkid…

lol … listen to me?

---

<div class="post-metadata">

**Author:** ![Coldaccord](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/coldaccord/32/7272_2.png) [@Coldaccord](https://forums.speedlife.net/u/Coldaccord)\
**Post date:** [February 24, 2006, 6:54pm UTC](https://forums.speedlife.net/t/bling-bling-2-0-rods-and-20v-pistons-y0/8524/27 "2006-02-24T18:54:39Z")

</div>

well now i know never to take shrives advice

heh

---

<div class="post-metadata">

**Author:** ![PsngrSeatsR4Boys](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/psngrseatsr4boys/32/3078_2.png) [@PsngrSeatsR4Boys](https://forums.speedlife.net/u/PsngrSeatsR4Boys)\
**Post date:** [February 24, 2006, 7:23pm UTC](https://forums.speedlife.net/t/bling-bling-2-0-rods-and-20v-pistons-y0/8524/28 "2006-02-24T19:23:26Z")

</div>

> [@Coldaccord](#):
>
> well now i know never to take shrives advice
> 
> heh

hahha, just now found this out? :poke:

Talked to rodney(guy i got them through)… turns out it is the forging.

I was measuring with a ruler on the piston top, came out to ~81mm, but the top is ribbed somewhat, so kinda hard to measure. Hard to describe, but anyways, i went back and measured the flat spot on the bottom below the pin and it came out to about 82mm… which is too big for an 81mm bore. Monday i’ll go to the physics lab at school and get a digital caliper to be sure.

\<— haenszel ☹

---

<div class="post-metadata">

**Author:** ![HotRodKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/hotrodkid/32/7609_2.png) [@HotRodKid](https://forums.speedlife.net/u/HotRodKid)\
**Post date:** [February 24, 2006, 7:35pm UTC](https://forums.speedlife.net/t/bling-bling-2-0-rods-and-20v-pistons-y0/8524/29 "2006-02-24T19:35:08Z")

</div>

well the top is going to be undersized because it runs hotter and therefor it expands more

---

<div class="post-metadata">

**Author:** ![Shrives](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shrives/32/7250_2.png) [@Shrives](https://forums.speedlife.net/u/Shrives)\
**Post date:** [February 25, 2006, 11:10am UTC](https://forums.speedlife.net/t/bling-bling-2-0-rods-and-20v-pistons-y0/8524/30 "2006-02-25T11:10:07Z")

</div>

> [@Coldaccord](#):
>
> well now i know never to take shrives advice
> 
> heh

:word: :tup:

---

<div class="post-metadata">

**Author:** ![2TurboZ](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/2turboz/32/7577_2.png) [@2TurboZ](https://forums.speedlife.net/u/2TurboZ)\
**Post date:** [February 25, 2006, 5:47pm UTC](https://forums.speedlife.net/t/bling-bling-2-0-rods-and-20v-pistons-y0/8524/31 "2006-02-25T17:47:25Z")

</div>

Well for those of you that don’t know…Serika works for JE in Cali…I would have taken his word and measured as to what he said :tup:

[Previous page](https://forums.speedlife.net/t/bling-bling-2-0-rods-and-20v-pistons-y0/8524.md?page=1)
