# Blitz injector **URL:** \ **Category:** SON240sx Automotive\ **Created:** [July 26, 2007, 5:19am UTC](https://forums.speedlife.net/t/blitz-injector/107975 "2007-07-26T05:19:32Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![absolum](https://avatars.discourse-cdn.com/v4/letter/a/e47c2d/32.png) [@absolum](https://forums.speedlife.net/u/absolum)\ **Post date:** [July 26, 2007, 5:19am UTC](https://forums.speedlife.net/t/blitz-injector/107975/1 "2007-07-26T05:19:32Z")
IS anyone familiar with installing blitz injectors. I was told that they required some injector adapter in order to bolt up to the SR rail. Does anyone has a link or a faq on how it’s done? ---
**Author:** ![conky](https://avatars.discourse-cdn.com/v4/letter/c/41988e/32.png) [@conky](https://forums.speedlife.net/u/conky)\ **Post date:** [July 26, 2007, 7:19am UTC](https://forums.speedlife.net/t/blitz-injector/107975/2 "2007-07-26T07:19:35Z")
The blitz injectors should come with what look like 4 big washers that are brass in color if i remeber correctly. Those are actually for Toyota but it will still work for the SR20DET. What you have to do is remove your old injector clips (they look like little clamps with 2 allen screws the hold the injectors in place). When you put the new injectors in, you have to remove one of the factory o-rings off the original injectors and transfer them to the new ones. (or get new ones from nissan) Once you change the orings over, install the injectors with the ‘Toyota washers’. Next, the injector wiring clip will not fit now because the injectrors sit lower due to the toyota ‘washers’ so you have to shave off a little of each plastic clip to snap the injector harness back in. Carefull not to shave too much or the clips wont stay put. I hope this helps… ---
**Author:** ![conky](https://avatars.discourse-cdn.com/v4/letter/c/41988e/32.png) [@conky](https://forums.speedlife.net/u/conky)\ **Post date:** [July 26, 2007, 7:20am UTC](https://forums.speedlife.net/t/blitz-injector/107975/3 "2007-07-26T07:20:54Z")
BTW…shave the plastic on the injector harness…not the injectors them selves ---
**Author:** ![absolum](https://avatars.discourse-cdn.com/v4/letter/a/e47c2d/32.png) [@absolum](https://forums.speedlife.net/u/absolum)\ **Post date:** [July 26, 2007, 2:22pm UTC](https://forums.speedlife.net/t/blitz-injector/107975/4 "2007-07-26T14:22:50Z")
Thanks a lot for the instruction but they seem to be more trouble than it’s worth. 1st off , I didn’t get any washer with the injectors, I bought a set of 4 brand new injector in the package that included new washer and new connectors. I think I am better off selling them and buying a top feed rail and use some top feed injectors than. Thanks.