# Bolt In Roll Bar

**URL:** <https://forums.speedlife.net/t/bolt-in-roll-bar/80581>\
**Category:** SON240sx Automotive\
**Created:** [February 17, 2004, 5:14am UTC](https://forums.speedlife.net/t/bolt-in-roll-bar/80581 "2004-02-17T05:14:33Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Ezzie](https://avatars.discourse-cdn.com/v4/letter/e/c5a1d2/32.png) [@Ezzie](https://forums.speedlife.net/u/Ezzie)\
**Post date:** [February 17, 2004, 5:14am UTC](https://forums.speedlife.net/t/bolt-in-roll-bar/80581/1 "2004-02-17T05:14:33Z")

</div>

Anyone have any experience with a bolt in roll bar for an S13 FB? Where to get? Installation Issues?.. for Solo I use.

---

<div class="post-metadata">

**Author:** ![Pavel](https://avatars.discourse-cdn.com/v4/letter/p/a4c791/32.png) [@Pavel](https://forums.speedlife.net/u/Pavel)\
**Post date:** [February 17, 2004, 8:55am UTC](https://forums.speedlife.net/t/bolt-in-roll-bar/80581/2 "2004-02-17T08:55:11Z")

</div>

hmm… You can make one? CP Racing has one as well I think.

---

<div class="post-metadata">

**Author:** ![SHIFT\_KA24DET](https://avatars.discourse-cdn.com/v4/letter/s/b9bd4f/32.png) [@SHIFT\_KA24DET](https://forums.speedlife.net/u/SHIFT_KA24DET)\
**Post date:** [February 17, 2004, 6:48pm UTC](https://forums.speedlife.net/t/bolt-in-roll-bar/80581/3 "2004-02-17T18:48:28Z")

</div>

O’Brian Motorsports

Ask for Ronald O’Brian he makes custom roll cages and other race equipment.

Cell: 416-803-1284

---

<div class="post-metadata">

**Author:** ![Polak182](https://avatars.discourse-cdn.com/v4/letter/p/7feea3/32.png) [@Polak182](https://forums.speedlife.net/u/Polak182)\
**Post date:** [February 17, 2004, 8:16pm UTC](https://forums.speedlife.net/t/bolt-in-roll-bar/80581/4 "2004-02-17T20:16:07Z")

</div>

do these guys make rollcages that connect to your rollbar? i would really wanna stiffen my suspension. and whats the cost? roughtly…

---

<div class="post-metadata">

**Author:** ![Ezzie](https://avatars.discourse-cdn.com/v4/letter/e/c5a1d2/32.png) [@Ezzie](https://forums.speedlife.net/u/Ezzie)\
**Post date:** [February 18, 2004, 4:54am UTC](https://forums.speedlife.net/t/bolt-in-roll-bar/80581/5 "2004-02-18T04:54:38Z")

</div>

OK thanks guys, I am after a bolt-in for this car. I have used Ronny O’Brien (Brampton,ON) for full cage work but he prefers to do weld-ins rather than bolt-ins. He does excellent work and I highly recommend him if you need a nice chrome-moly cage done.

Looks like there are no alternatives to the Autopower (San Diego, CA) ones? I was hoping to avoid the cost of shipping/customs clearance to get one.

Has anyone on this forum ever bought and installed one of the Autopower bars for the 240SX?