# Borrow Bits? (Tools)

**URL:** <https://forums.speedlife.net/t/borrow-bits-tools/179391>\
**Category:** PittSpeed Off Topic\
**Created:** [January 10, 2006, 7:23am UTC](https://forums.speedlife.net/t/borrow-bits-tools/179391 "2006-01-10T07:23:20Z")\
**Posts on this page:** 16\
**Page:** 1

<div class="post-metadata">

**Author:** ![berad](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/berad/32/5953_2.png) [@berad](https://forums.speedlife.net/u/berad)\
**Post date:** [January 10, 2006, 7:23am UTC](https://forums.speedlife.net/t/borrow-bits-tools/179391/1 "2006-01-10T07:23:20Z")

</div>

Need M14 and M16 1/2 drive bits to pull my axle this weekend. Anyone have some I could borrow till Monday? = 🍺 at Hooters

---

<div class="post-metadata">

**Author:** ![fshowcars](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/fshowcars/32/5937_2.png) [@fshowcars](https://forums.speedlife.net/u/fshowcars)\
**Post date:** [January 10, 2006, 7:43am UTC](https://forums.speedlife.net/t/borrow-bits-tools/179391/2 "2006-01-10T07:43:02Z")

</div>

axle in what?

---

<div class="post-metadata">

**Author:** ![berad](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/berad/32/5953_2.png) [@berad](https://forums.speedlife.net/u/berad)\
**Post date:** [January 10, 2006, 7:50am UTC](https://forums.speedlife.net/t/borrow-bits-tools/179391/3 "2006-01-10T07:50:43Z")

</div>

> [@fshowcars](#):
>
> axle in what?

Passat. CV boot split in 1/2. Rebuild kit from ECS $25.

---

<div class="post-metadata">

**Author:** ![fshowcars](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/fshowcars/32/5937_2.png) [@fshowcars](https://forums.speedlife.net/u/fshowcars)\
**Post date:** [January 10, 2006, 7:53am UTC](https://forums.speedlife.net/t/borrow-bits-tools/179391/4 "2006-01-10T07:53:56Z")

</div>

i would think you’d only need the m14 triple square for the output shaft? i have one if it’s the same as all the other vws… however it’s at the garage which i won’t be to until thurs / friday. ☹

---

<div class="post-metadata">

**Author:** ![bgblockelcamino](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bgblockelcamino/32/5997_2.png) [@bgblockelcamino](https://forums.speedlife.net/u/bgblockelcamino)\
**Post date:** [January 10, 2006, 8:10am UTC](https://forums.speedlife.net/t/borrow-bits-tools/179391/5 "2006-01-10T08:10:27Z")

</div>

C & L Tool  
Address: 218 Flaugherty Run Rd, Coraopolis, PA 15108  
Phone: (724) 457-4900

if you can’t find one, they have been real reasonable for tools when i need them

---

<div class="post-metadata">

**Author:** ![berad](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/berad/32/5953_2.png) [@berad](https://forums.speedlife.net/u/berad)\
**Post date:** [January 10, 2006, 8:31am UTC](https://forums.speedlife.net/t/borrow-bits-tools/179391/6 "2006-01-10T08:31:36Z")

</div>

> [@fshowcars](#):
>
> i would think you’d only need the m14 triple square for the output shaft? i have one if it’s the same as all the other vws… however it’s at the garage which i won’t be to until thurs / friday. ☹

To pull the axle from the hub its a big ass M16 bolt, too pull the axle from the tranny theres a few M14’s.

Thurs/Fri is fine. Will call. Do I get to see any top secret stuff? :mullet: thanks.

---

<div class="post-metadata">

**Author:** ![Cheeks](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/cheeks/32/5930_2.png) [@Cheeks](https://forums.speedlife.net/u/Cheeks)\
**Post date:** [January 10, 2006, 11:46am UTC](https://forums.speedlife.net/t/borrow-bits-tools/179391/7 "2006-01-10T11:46:06Z")

</div>

I can get you either of them from work

---

<div class="post-metadata">

**Author:** ![berad](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/berad/32/5953_2.png) [@berad](https://forums.speedlife.net/u/berad)\
**Post date:** [January 13, 2006, 3:01pm UTC](https://forums.speedlife.net/t/borrow-bits-tools/179391/8 "2006-01-13T15:01:55Z")

</div>

SOnny call me back! GOing out to eat then to a move at Loews. If ur gonna be home around 10 just bring them with you.

If not, Cheeks, where are you?

Ive been puttin this off FOREVER but its getting done tomorrow no doubt. Thanks guys.

---

<div class="post-metadata">

**Author:** ![Cheeks](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/cheeks/32/5930_2.png) [@Cheeks](https://forums.speedlife.net/u/Cheeks)\
**Post date:** [January 13, 2006, 6:30pm UTC](https://forums.speedlife.net/t/borrow-bits-tools/179391/9 "2006-01-13T18:30:00Z")

</div>

etna advanced auto, call me 412.841.7448

---

<div class="post-metadata">

**Author:** ![berad](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/berad/32/5953_2.png) [@berad](https://forums.speedlife.net/u/berad)\
**Post date:** [January 14, 2006, 11:50am UTC](https://forums.speedlife.net/t/borrow-bits-tools/179391/10 "2006-01-14T11:50:30Z")

</div>

Nobdy fuckin has 16 or 14 mm hex dammit!!! ORdering online now. weaksauce

---

<div class="post-metadata">

**Author:** ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)\
**Post date:** [January 14, 2006, 12:39pm UTC](https://forums.speedlife.net/t/borrow-bits-tools/179391/11 "2006-01-14T12:39:08Z")

</div>

i do

---

<div class="post-metadata">

**Author:** ![whitey](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/whitey/32/5911_2.png) [@whitey](https://forums.speedlife.net/u/whitey)\
**Post date:** [January 14, 2006, 12:42pm UTC](https://forums.speedlife.net/t/borrow-bits-tools/179391/12 "2006-01-14T12:42:50Z")

</div>

i have them sitting in my garage

---

<div class="post-metadata">

**Author:** ![berad](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/berad/32/5953_2.png) [@berad](https://forums.speedlife.net/u/berad)\
**Post date:** [January 14, 2006, 1:29pm UTC](https://forums.speedlife.net/t/borrow-bits-tools/179391/13 "2006-01-14T13:29:30Z")

</div>

too late now. just have to wait for them too come in the mail. I drove to 6 different stores in the north hills and not 1 had anything bigger than a 10

---

<div class="post-metadata">

**Author:** ![whitey](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/whitey/32/5911_2.png) [@whitey](https://forums.speedlife.net/u/whitey)\
**Post date:** [January 14, 2006, 1:33pm UTC](https://forums.speedlife.net/t/borrow-bits-tools/179391/14 "2006-01-14T13:33:13Z")

</div>

why did you just not a VW person? i have them, sailor has them, sonny has them

---

<div class="post-metadata">

**Author:** ![berad](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/berad/32/5953_2.png) [@berad](https://forums.speedlife.net/u/berad)\
**Post date:** [January 15, 2006, 6:19am UTC](https://forums.speedlife.net/t/borrow-bits-tools/179391/15 "2006-01-15T06:19:15Z")

</div>

> [@whitey](#):
>
> why did you just not a VW person? i have them, sailor has them, sonny has them

Are they impact?  
Whitey can I borrow ur 16mm and 14mm bits? :burnout:

---

<div class="post-metadata">

**Author:** ![whitey](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/whitey/32/5911_2.png) [@whitey](https://forums.speedlife.net/u/whitey)\
**Post date:** [January 15, 2006, 8:59am UTC](https://forums.speedlife.net/t/borrow-bits-tools/179391/16 "2006-01-15T08:59:10Z")

</div>

of course