# Brake Rotors **URL:** \ **Category:** PittSpeed Off Topic\ **Created:** [October 21, 2003, 9:40am UTC](https://forums.speedlife.net/t/brake-rotors/162443 "2003-10-21T09:40:27Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![BlackZ28](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/blackz28/32/5932_2.png) [@BlackZ28](https://forums.speedlife.net/u/BlackZ28)\ **Post date:** [October 21, 2003, 9:40am UTC](https://forums.speedlife.net/t/brake-rotors/162443/1 "2003-10-21T09:40:27Z")
anybody know where i can get a good set of slotted and cross drilled rotors that are zinc washed, and don’t cost too much? also, i’m thinking hawk pads, but what does everyone think? ---
**Author:** ![Stroker](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/stroker/32/5948_2.png) [@Stroker](https://forums.speedlife.net/u/Stroker)\ **Post date:** [October 21, 2003, 9:46am UTC](https://forums.speedlife.net/t/brake-rotors/162443/2 "2003-10-21T09:46:01Z")
ever check e-bay ---
**Author:** ![fshowcars](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/fshowcars/32/5937_2.png) [@fshowcars](https://forums.speedlife.net/u/fshowcars)\ **Post date:** [October 21, 2003, 9:49am UTC](https://forums.speedlife.net/t/brake-rotors/162443/3 "2003-10-21T09:49:55Z")
hawk pads are good… don’t know about discs… mintex pads are good too. ---
**Author:** ![silvrhand](https://avatars.discourse-cdn.com/v4/letter/s/cc9497/32.png) [@silvrhand](https://forums.speedlife.net/u/silvrhand)\ **Post date:** [October 21, 2003, 10:05am UTC](https://forums.speedlife.net/t/brake-rotors/162443/4 "2003-10-21T10:05:01Z")
I went with slotted cause I really didn’t want to deal with cross drilled cracking. I’m happy with the, notice less brake fade and a bit better bite at high speeds, you can hear em whirr a little bit if you get on em hard… > _Originally posted by BlackZ28_ > **anybody know where i can get a good set of slotted and cross drilled rotors that are zinc washed, and don’t cost too much? also, i’m thinking hawk pads, but what does everyone think?** ---
**Author:** ![brokeasskorean](https://avatars.discourse-cdn.com/v4/letter/b/e19b73/32.png) [@brokeasskorean](https://forums.speedlife.net/u/brokeasskorean)\ **Post date:** [October 21, 2003, 10:11am UTC](https://forums.speedlife.net/t/brake-rotors/162443/5 "2003-10-21T10:11:27Z")
yea i dunno about cross drilled rotors,i mean they look cool and all but that is about it,they have a tendency to crack.i run power slots on my car on all 4 corners and it brakes pretty good.i recommend them ---
**Author:** ![BlackZ28](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/blackz28/32/5932_2.png) [@BlackZ28](https://forums.speedlife.net/u/BlackZ28)\ **Post date:** [October 21, 2003, 10:16am UTC](https://forums.speedlife.net/t/brake-rotors/162443/6 "2003-10-21T10:16:06Z")
yeah, i don’t like ebay for a couple reasons… 1 - you don’t always know who you’re dealing with…2 - they rarely have brand names and i won’t trust a non-brand name. i heard that powerslots will eventually warp, which is what i’m trying to stay away from because my stock rotors were warped to shit after 5k miles on the car. ---
**Author:** ![silvrhand](https://avatars.discourse-cdn.com/v4/letter/s/cc9497/32.png) [@silvrhand](https://forums.speedlife.net/u/silvrhand)\ **Post date:** [October 21, 2003, 10:22am UTC](https://forums.speedlife.net/t/brake-rotors/162443/7 "2003-10-21T10:22:02Z")
Ouch, Warped after 5k, could it be something besides the rotors or is this a known issue? I’d check something else before dropping $400 on new rotors only to have them go after 5k. My powerslots have yet to warp and still feel strong after 2 years and 12k miles. > _Originally posted by BlackZ28_ > **yeah, i don’t like ebay for a couple reasons… 1 - you don’t always know who you’re dealing with…2 - they rarely have brand names and i won’t trust a non-brand name.** > > > > **i heard that powerslots will eventually warp, which is what i’m trying to stay away from because my stock rotors were warped to shit after 5k miles on the car.** ---
**Author:** ![halo\_666](https://avatars.discourse-cdn.com/v4/letter/h/e36b37/32.png) [@halo\_666](https://forums.speedlife.net/u/halo_666)\ **Post date:** [October 21, 2003, 10:23am UTC](https://forums.speedlife.net/t/brake-rotors/162443/8 "2003-10-21T10:23:35Z")
powerslots are loud as hell im runnin brembos now, slotted with ebc green stuff pads there nice, i got mine from the tirerack for a pretty good price ebc green stuff is ok, they dont leave that much dust on your wheels, dont fade, but sometimes squeek a little but i keep hearing good stuff about hawk pads, so i think thats where im headin twards next time i need brakes ---
**Author:** ![brokeasskorean](https://avatars.discourse-cdn.com/v4/letter/b/e19b73/32.png) [@brokeasskorean](https://forums.speedlife.net/u/brokeasskorean)\ **Post date:** [October 21, 2003, 10:24am UTC](https://forums.speedlife.net/t/brake-rotors/162443/9 "2003-10-21T10:24:57Z")
> _Originally posted by BlackZ28_ > **yeah, i don’t like ebay for a couple reasons… 1 - you don’t always know who you’re dealing with…2 - they rarely have brand names and i won’t trust a non-brand name.** > > > > **i heard that powerslots will eventually warp, which is what i’m trying to stay away from because my stock rotors were warped to shit after 5k miles on the car.** i have about 16k on my front power slots and about 1600 on the backs…still stop smoothly with no signs of warping and hardly an fade. ---
**Author:** ![77rednecktruck](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/77rednecktruck/32/5966_2.png) [@77rednecktruck](https://forums.speedlife.net/u/77rednecktruck)\ **Post date:** [October 21, 2003, 10:41am UTC](https://forums.speedlife.net/t/brake-rotors/162443/10 "2003-10-21T10:41:20Z")
Exactly - i had a problem with my sho going through rotors every year and all I needed was a different temp brake pad. The bendix brakes from autozone would heat up too much and warp the rotor. I ordered a set of pads from some sho site(I forget what they were) and the braking completely changed. You may not need to drop $$$ for rotors, just try a different pad first. > _Originally posted by silvrhand_ > **Ouch,** > > > > Warped after 5k, could it be something besides the rotors or is this a known issue? > > I’d check something else before dropping $400 on new rotors only to have them go after 5k. > > **My powerslots have yet to warp and still feel strong after 2 years and 12k miles.** ---
**Author:** ![brokeasskorean](https://avatars.discourse-cdn.com/v4/letter/b/e19b73/32.png) [@brokeasskorean](https://forums.speedlife.net/u/brokeasskorean)\ **Post date:** [October 21, 2003, 10:44am UTC](https://forums.speedlife.net/t/brake-rotors/162443/11 "2003-10-21T10:44:38Z")
> _Originally posted by 2kaltima_ > **Exactly - i had a problem with my sho going through rotors every year and all I needed was a different temp brake pad. The bendix brakes from autozone would heat up too much and warp the rotor. I ordered a set of pads from some sho site(I forget what they were) and the braking completely changed. You may not need to drop $$$ for rotors, just try a different pad first.** yea i actually did some “research” b4 i bought my brakes for my eclipse and found out that all the hardcore road racers that drive dsm’s run power slot rotors and axxis metal master brake pads for the street,then swap out the pads for another set or race pads that go thru rotors pretty f’in fast,i think the pads will go thru 2-3 sets of rotors b4 the pads go,but u stop like a champ ---
**Author:** ![BlackZ28](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/blackz28/32/5932_2.png) [@BlackZ28](https://forums.speedlife.net/u/BlackZ28)\ **Post date:** [October 21, 2003, 10:49am UTC](https://forums.speedlife.net/t/brake-rotors/162443/12 "2003-10-21T10:49:31Z")
remember, i bought my car new. i don’t think GM would put a pad thats gets too hot for their rotors. i’m going to call [www.irotors.com](http://www.irotors.com) and see if i can get a picture or two from them. ---
**Author:** ![brokeasskorean](https://avatars.discourse-cdn.com/v4/letter/b/e19b73/32.png) [@brokeasskorean](https://forums.speedlife.net/u/brokeasskorean)\ **Post date:** [October 21, 2003, 10:51am UTC](https://forums.speedlife.net/t/brake-rotors/162443/13 "2003-10-21T10:51:39Z")
> _Originally posted by BlackZ28_ > **remember, i bought my car new. i don’t think GM would put a pad thats gets too hot for their rotors. i’m going to call [www.irotors.com](http://www.irotors.com) and see if i can get a picture or two from them.** well actually factory brakes pretty much suck on any car minus a few that have nice brembos or something of that sort from the factory.the stock brakes werent designed to stop u from 120mph in 100ft u know what i mean? ---
**Author:** ![ohsoquik02](https://avatars.discourse-cdn.com/v4/letter/o/ecccb3/32.png) [@ohsoquik02](https://forums.speedlife.net/u/ohsoquik02)\ **Post date:** [October 21, 2003, 10:53am UTC](https://forums.speedlife.net/t/brake-rotors/162443/14 "2003-10-21T10:53:20Z")
> _Originally posted by BlackZ28_ > **remember, i bought my car new. i don’t think GM would put a pad thats gets too hot for their rotors. i’m going to call [www.irotors.com](http://www.irotors.com) and see if i can get a picture or two from them.** what about on the Z06s what do they run? if possible use theirs ---
**Author:** ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)\ **Post date:** [October 21, 2003, 10:58am UTC](https://forums.speedlife.net/t/brake-rotors/162443/15 "2003-10-21T10:58:10Z")
hold i know the guy that qwns red devil brakes he’s making the brakes for 04 up zo6’s …i’ll get him to make them 4 f-body’s:D ---
**Author:** ![77rednecktruck](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/77rednecktruck/32/5966_2.png) [@77rednecktruck](https://forums.speedlife.net/u/77rednecktruck)\ **Post date:** [October 21, 2003, 11:01am UTC](https://forums.speedlife.net/t/brake-rotors/162443/16 "2003-10-21T11:01:11Z")
First - it’s a gm so they do all kind of stupid shit from the factory 😃 Second - like brokeass said, they design their cars for the normal person, not the enthuiasist(sp?) > _Originally posted by BlackZ28_ > **remember, i bought my car new. i don’t think GM would put a pad thats gets too hot for their rotors. i’m going to call [www.irotors.com](http://www.irotors.com) and see if i can get a picture or two from them.** ---
**Author:** ![ohsoquik02](https://avatars.discourse-cdn.com/v4/letter/o/ecccb3/32.png) [@ohsoquik02](https://forums.speedlife.net/u/ohsoquik02)\ **Post date:** [October 21, 2003, 11:20am UTC](https://forums.speedlife.net/t/brake-rotors/162443/17 "2003-10-21T11:20:18Z")
> _Originally posted by 2kaltima_ > **First - it’s a gm so they do all kind of stupid shit from the factory 😃 > Second - like brokeass said, they design their cars for the normal person, not the enthuiasist(sp?)** Z06 was set up for some serious shit ---
**Author:** ![BlackZ28](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/blackz28/32/5932_2.png) [@BlackZ28](https://forums.speedlife.net/u/BlackZ28)\ **Post date:** [October 21, 2003, 11:24am UTC](https://forums.speedlife.net/t/brake-rotors/162443/18 "2003-10-21T11:24:01Z")
> _Originally posted by brokeasskorean_ > **well actually factory brakes pretty much suck on any car minus a few that have nice brembos or something of that sort from the factory.the stock brakes werent designed to stop u from 120mph in 100ft u know what i mean?** yeah, but i’m not that hard on my brakes, actually i don’t think i’ve ever stomped on them all the way. ---
**Author:** ![whitey](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/whitey/32/5911_2.png) [@whitey](https://forums.speedlife.net/u/whitey)\ **Post date:** [October 21, 2003, 12:22pm UTC](https://forums.speedlife.net/t/brake-rotors/162443/19 "2003-10-21T12:22:11Z")
I am running Green Stuffs right now, not the biggest fan of them. Check at autozone and see if they make performance frictions for your car. Awesome brake pads and they have unlimited warranty so you spend 50 bucks and have pads for life. slotted rotors are the best for your application it seems, see about getting them kryoed if you really want strength and stopping ability. ---
**Author:** ![silvrhand](https://avatars.discourse-cdn.com/v4/letter/s/cc9497/32.png) [@silvrhand](https://forums.speedlife.net/u/silvrhand)\ **Post date:** [October 21, 2003, 12:28pm UTC](https://forums.speedlife.net/t/brake-rotors/162443/20 "2003-10-21T12:28:23Z")
Just depends on the driving you are doing. If you are really hard on the brakes you could be overheating them and not letting them cool properly, which would be an extreme. I went with the setup that brokeass mentioned, the powerslot slotted rotors with metal matrix pads, they suck right at first in the morning but once warmed up they’ll lock up the seat belt on you hard. > _Originally posted by BlackZ28_ > **remember, i bought my car new. i don’t think GM would put a pad thats gets too hot for their rotors. i’m going to call [www.irotors.com](http://www.irotors.com) and see if i can get a picture or two from them.** [Next page](https://forums.speedlife.net/t/brake-rotors/162443.md?page=2)