# Brand new Greddy Engine Oil Block Adapter 3/4 x 16UNF -10AN Fittings

**URL:** <https://forums.speedlife.net/t/brand-new-greddy-engine-oil-block-adapter-3-4-x-16unf-10an-fittings/230203>\
**Category:** Classifieds\
**Created:** [April 24, 2013, 9:53pm UTC](https://forums.speedlife.net/t/brand-new-greddy-engine-oil-block-adapter-3-4-x-16unf-10an-fittings/230203 "2013-04-24T21:53:44Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![I\_3-SR20DET](https://avatars.discourse-cdn.com/v4/letter/i/f0a364/32.png) [@I\_3-SR20DET](https://forums.speedlife.net/u/I_3-SR20DET)\
**Post date:** [April 24, 2013, 9:53pm UTC](https://forums.speedlife.net/t/brand-new-greddy-engine-oil-block-adapter-3-4-x-16unf-10an-fittings/230203/1 "2013-04-24T21:53:44Z")

</div>

LOCATED IN BRAMPTON TEXT: (905-460-four829)  
Please no time wasters, its an inexpensive item, you dont need to meet up to just ‘check it out’

As the title states I purchased a brand new Greddy oil filter sandwitch plate that is intended to feed an oil cooler. I also have to go along with the sale one of the caps that adapts a port to thread an oil pressure or temp sensor into.  
Some key features. (info from frsport)

"-Greddy oil block adapter with built in thermostat. This is to be used with an external oil cooler. Threaded -10AN fittings are a common size used by most oil coolers.

-Built in thermostat allows the engine to warm up faster. This helps keep engine wear to a minimum."

![http://i1.frsimg.com/images/detailed_images/Greddy_12401123_01.jpg](http://i1.frsimg.com/images/detailed_images/Greddy_12401123_01.jpg)

![http://i1.frsimg.com/images/detailed_images/Greddy_16400720_03.jpg](http://i1.frsimg.com/images/detailed_images/Greddy_16400720_03.jpg)

The reason I am selling is: The unit does not fit onto my modified 2JZ block (deleted factory oil cooler/warmer), which I discovered after I had purchased this from FRSport and paid out the ass on shipping and duties.

[Greddy 12401123 LINK](http://www.frsport.com/Greddy-12401123-Engine-Oil-Block-Adapter-3-4-x-16UNF--10AN-Fittings_p_26314.html)

[Sensor Adapter LINK.](http://www.frsport.com/Greddy-16400720-M18-Thread-1-8-PT-Sensor-Gauge-Adapter_p_16528.html)

For SR20 fitment guide:  
-Redtop/early blacktop S13 SR’s use 3/4x16 thread pitch.  
-Will not fit Late model type-X S13 or S14 SR.

-Look up the part number of the oil filter you use to discover your thread pitch if you do not know.

The item is brand new all I did was assemble the fittings into the unit, properly lubricated the o-rings etc.

I am looking to get what FRSport charges plus duties, minus shipping.  
**$160 for both items.** (no I will not sell separate!)

---

<div class="post-metadata">

**Author:** ![I\_3-SR20DET](https://avatars.discourse-cdn.com/v4/letter/i/f0a364/32.png) [@I\_3-SR20DET](https://forums.speedlife.net/u/I_3-SR20DET)\
**Post date:** [July 2, 2013, 2:35pm UTC](https://forums.speedlife.net/t/brand-new-greddy-engine-oil-block-adapter-3-4-x-16unf-10an-fittings/230203/2 "2013-07-02T14:35:42Z")

</div>

Just because I actually put time into this FS thread, ill bump it.  
Someone must be interested in having this.