# Build your own sportscar **URL:** \ **Category:** Builds\ **Created:** [August 27, 2006, 6:32pm UTC](https://forums.speedlife.net/t/build-your-own-sportscar/16577 "2006-08-27T18:32:26Z")\ **Posts on this page:** 1\ **Showing post:** 150
**Author:** ![eMKay](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/emkay/32/7428_2.png) [@eMKay](https://forums.speedlife.net/u/eMKay)\ **Post date:** [March 12, 2007, 10:34am UTC](https://forums.speedlife.net/t/build-your-own-sportscar/16577/150 "2007-03-12T10:34:17Z")
Lots of progress over the last week or so, I got a steering rack from a Triumph Spitfire, Chevette master cylinder, and calipers are on the way. I also fabbed the motor mounts, this I was dreading but it was actually really easy. They are just tacked for now until I’m SURE everything is straight and level. I may have overbuilt them a little, and the rubber part is from a circle track website (speedway motors) so they are REALLY overkill for a 1298cc engine. But they are nice and stiff, not as stiff as poly mounts though. Also I got to work on the front half of the wiring harness. This is going to take FOREVER. Next I have to cut 6" or so out of the Spitfire rack and make brackets for that. ![http://www.emkayusa.com/locost/locost79.jpg](http://www.emkayusa.com/locost/locost79.jpg) ![http://www.emkayusa.com/locost/locost80.jpg](http://www.emkayusa.com/locost/locost80.jpg) ![http://www.emkayusa.com/locost/locost81.jpg](http://www.emkayusa.com/locost/locost81.jpg) ![http://www.emkayusa.com/locost/locost82.jpg](http://www.emkayusa.com/locost/locost82.jpg) ![http://www.emkayusa.com/locost/locost83.jpg](http://www.emkayusa.com/locost/locost83.jpg) --- _[View the full topic](https://forums.speedlife.net/t/build-your-own-sportscar/16577)._