# built from spare car parts... **URL:** \ **Category:** NYSpeed Off Topic\ **Created:** [June 26, 2011, 6:19pm UTC](https://forums.speedlife.net/t/built-from-spare-car-parts/213904 "2011-06-26T18:19:23Z")\ **Posts on this page:** 5\ **Page:** 2
**Author:** ![juicedz4](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/juicedz4/32/5051_2.png) [@juicedz4](https://forums.speedlife.net/u/juicedz4)\ **Post date:** [June 27, 2011, 11:40am UTC](https://forums.speedlife.net/t/built-from-spare-car-parts/213904/21 "2011-06-27T11:40:31Z")
Cool :tup: You possibly could have used some Linseed oil or Penetrol on the bare metal. But depending on the condition that still might not have looked good. Either way, I like it. I may have to put my old hollow core cavy cam to use … Dan ---
**Author:** ![turbojohnny](https://avatars.discourse-cdn.com/v4/letter/t/df788c/32.png) [@turbojohnny](https://forums.speedlife.net/u/turbojohnny)\ **Post date:** [June 27, 2011, 8:10pm UTC](https://forums.speedlife.net/t/built-from-spare-car-parts/213904/22 "2011-06-27T20:10:47Z")
> [@juicedz4](#): > > Cool :tup: > > You possibly could have used some Linseed oil or Penetrol on the bare metal. But depending on the condition that still might not have looked good. > > Either way, I like it. I may have to put my old hollow core cavy cam to use … > > Dan I’d definitely do it. ---
**Author:** ![ubengineering](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ubengineering/32/5171_2.png) [@ubengineering](https://forums.speedlife.net/u/ubengineering)\ **Post date:** [June 27, 2011, 8:19pm UTC](https://forums.speedlife.net/t/built-from-spare-car-parts/213904/23 "2011-06-27T20:19:22Z")
nice! i did this a while back with an old crank i had sitting in my garage ---
**Author:** ![turbojohnny](https://avatars.discourse-cdn.com/v4/letter/t/df788c/32.png) [@turbojohnny](https://forums.speedlife.net/u/turbojohnny)\ **Post date:** [June 27, 2011, 8:29pm UTC](https://forums.speedlife.net/t/built-from-spare-car-parts/213904/24 "2011-06-27T20:29:53Z")
ohh, I have one of those too… ---
**Author:** ![jsac442](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jsac442/32/5176_2.png) [@jsac442](https://forums.speedlife.net/u/jsac442)\ **Post date:** [June 27, 2011, 8:56pm UTC](https://forums.speedlife.net/t/built-from-spare-car-parts/213904/25 "2011-06-27T20:56:25Z")
I made a toilet paper holder for my shop out of old parts, the base is a rotor, cam shaft welded to one side of the top (outside) of the rotor where the studs go through not the part the pads ride on, and an inner tie rod end off a 07 chevy 2500 truck welded to the top of the cam so the rolls dispense off the tie rod end lol. Il post pics at work tomorrow [Previous page](https://forums.speedlife.net/t/built-from-spare-car-parts/213904.md?page=1)