# built rb26dett motorset fs **URL:** \ **Category:** Classifieds\ **Created:** [November 28, 2007, 11:49am UTC](https://forums.speedlife.net/t/built-rb26dett-motorset-fs/111429 "2007-11-28T11:49:28Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [November 28, 2007, 11:49am UTC](https://forums.speedlife.net/t/built-rb26dett-motorset-fs/111429/1 "2007-11-28T11:49:28Z")
\*\* Please fill in all the fields before creating the thread \*\*I would lke to sell this as a complete set. R32 rb26dett block and head block has been balanced and blueprinted, bored .020 over , nismo bearings cp pistons cryo-d connecting rods crank has been pulled and re machined for the N1 oil pump cometic1.2m head gasket head 5 angle valve job stage 3 port and polish planed head stock cams overal 750cc msd injectors hks fuel rail aeromotive fuel pressure regulator apexi power fc d-jetro w/ 2 map sensors apexi power fc commander turbo is polished holset hx 35, with high interference exhaust wheel 4" turbo inlet 3" v-band clamp exhaust outlet tial 4mm waste gate with .9bar spring and screemer pipe ex engineering exhaust manifold this motor was built by taylor and sons this motor made 440rwhp at 12psi and 345ftlbs of torque this motor was built for 600plus hp, but not run higher than 15psi, this is complete and ready to run , i also have an rb25 tranny for this motor and the wiring if it was to go into and s13 240sx looking to get $6500. for this setup thanks Bryan ---
**Author:** ![Canadian\_Idol](https://avatars.discourse-cdn.com/v4/letter/c/b9e5f3/32.png) [@Canadian\_Idol](https://forums.speedlife.net/u/Canadian_Idol)\ **Post date:** [November 28, 2007, 12:21pm UTC](https://forums.speedlife.net/t/built-rb26dett-motorset-fs/111429/2 "2007-11-28T12:21:24Z")
> [@focusinprogress is a free man](https://forums.speedlife.net/t/focusinprogress-is-a-free-man/15055/8): > > tial 4mm waste gate with .9bar spring and screemer pipe That wastegate is weaksauce! J/K Bryan is that the 40 or 44mm? And is that RB25 tranny included … that was unclear. Sick deal. I’ll spread the word. ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [November 28, 2007, 12:32pm UTC](https://forums.speedlife.net/t/built-rb26dett-motorset-fs/111429/3 "2007-11-28T12:32:05Z")
44mm. bryan ---
**Author:** ![Happy240sx](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/happy240sx/32/5515_2.png) [@Happy240sx](https://forums.speedlife.net/u/Happy240sx)\ **Post date:** [November 28, 2007, 1:27pm UTC](https://forums.speedlife.net/t/built-rb26dett-motorset-fs/111429/4 "2007-11-28T13:27:53Z")
Retarded deal…this is almost crazier than my pricing. ---
**Author:** ![matty](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/matty/32/5043_2.png) [@matty](https://forums.speedlife.net/u/matty)\ **Post date:** [November 28, 2007, 1:32pm UTC](https://forums.speedlife.net/t/built-rb26dett-motorset-fs/111429/5 "2007-11-28T13:32:27Z")
bryan, if you do decide to part, i might be interested i one or two things sick deal tho try gtrc if you havent already ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [November 29, 2007, 6:03am UTC](https://forums.speedlife.net/t/built-rb26dett-motorset-fs/111429/6 "2007-11-29T06:03:07Z")
this motor can be seen running , if the weather is noice i might be able to drive the car farmer