# Built T56 Transmission, Bellhousings, hydraulics, and more, oh my
**URL:** https://forums.speedlife.net/t/built-t56-transmission-bellhousings-hydraulics-and-more-oh-my/70325
**Category:** Classifieds
**Created:** [July 10, 2009, 6:05am UTC](https://forums.speedlife.net/t/built-t56-transmission-bellhousings-hydraulics-and-more-oh-my/70325 "2009-07-10T06:05:28Z")
**Posts on this page:** 12
**Page:** 1
### Author:  [@turbo\_ls1\_ss](https://forums.speedlife.net/u/turbo_ls1_ss)
#### Post date: [July 10, 2009, 6:05am UTC](https://forums.speedlife.net/t/built-t56-transmission-bellhousings-hydraulics-and-more-oh-my/70325/1 "2009-07-10T06:05:28Z")
**2001 F-Body T56 Transmission**
Built in 2007 by Six Speeds Inc.
1-2 Slider Assembly
3-4 Slider Assembly
Billet Slider Keys (3-4 and 5-6)
3-4 Steel Fork
1-2 Bronze Fork Pads
3-4 Bronze Fork Pads
carbon syncro ring kit
new GM 2nd gear
new GM 3rd gear
new GM 5th gear
Viper Shaft
- labor & shipping
Viper 30 spline DS Yoke (1350 series) included
New Slave Cylinder with remountable remote bleeder
Clean and Painted
Mobil 1 ATF, changed yearly
there is minor bearing noise, but nothing to lose sleep over. Tranny still shifts tremendously, (when you have a clutch in front of it :mamoru:)
this build cost over $2000 alone, not including my oem tranny.
**$1500** - i just want it gone, but pretty firm on the price
**2001 F-body T56 Bellhousing**
OEM Aluminum Bell
**$125**
**Quick Time Performance SFI Bellhousing**
Wound Steel, same application
Comes with block shield
low miles. So you can keep you legs when your clutch explodes
i had to grind a small spot as shown below to clearance for a pipe. in no way does it diminish integrity
**$275** - cost $480 new plus shipping
**Pro 5.0 T56 Shifter
$60** - i believe i paid like $150 for this
**McLeod Adjustable Master Cylinder**
New Improved Version - New this season
under 1000 miles
**$225** - cost $330 new plus shipping
**27 Spline (stock F-body T56) 1350 Series Yoke
$40**
- $80 new
good day
---
### Author:  [@steve2k1116](https://forums.speedlife.net/u/steve2k1116)
#### Post date: [July 10, 2009, 2:47pm UTC](https://forums.speedlife.net/t/built-t56-transmission-bellhousings-hydraulics-and-more-oh-my/70325/2 "2009-07-10T14:47:31Z")
glad to hear your going auto :tup: glws bill
---
### Author:  [@Hass](https://forums.speedlife.net/u/Hass)
#### Post date: [July 10, 2009, 2:58pm UTC](https://forums.speedlife.net/t/built-t56-transmission-bellhousings-hydraulics-and-more-oh-my/70325/3 "2009-07-10T14:58:24Z")
wtb parts list.
steel shift forks etc…?
---
### Author:  [@jt76](https://forums.speedlife.net/u/jt76)
#### Post date: [July 10, 2009, 3:55pm UTC](https://forums.speedlife.net/t/built-t56-transmission-bellhousings-hydraulics-and-more-oh-my/70325/4 "2009-07-10T15:55:55Z")
I need a slave cyl 🙂
---
### Author:  [@joelster](https://forums.speedlife.net/u/joelster)
#### Post date: [July 10, 2009, 4:21pm UTC](https://forums.speedlife.net/t/built-t56-transmission-bellhousings-hydraulics-and-more-oh-my/70325/5 "2009-07-10T16:21:45Z")
Keep the driveshaft, you “MAY” be able to use it with the auto.
---
### Author:  [@turbo\_ls1\_ss](https://forums.speedlife.net/u/turbo_ls1_ss)
#### Post date: [July 13, 2009, 8:49am UTC](https://forums.speedlife.net/t/built-t56-transmission-bellhousings-hydraulics-and-more-oh-my/70325/6 "2009-07-13T08:49:41Z")
BUMP
---
### Author:  [@jt76](https://forums.speedlife.net/u/jt76)
#### Post date: [July 13, 2009, 11:22am UTC](https://forums.speedlife.net/t/built-t56-transmission-bellhousings-hydraulics-and-more-oh-my/70325/7 "2009-07-13T11:22:33Z")
I want the hurst shift knob and short stick
thanksssss pumpkin
---
### Author:  [@turbo\_ls1\_ss](https://forums.speedlife.net/u/turbo_ls1_ss)
#### Post date: [October 5, 2009, 5:45am UTC](https://forums.speedlife.net/t/built-t56-transmission-bellhousings-hydraulics-and-more-oh-my/70325/8 "2009-10-05T05:45:06Z")
Official Itemized List:
1-2 Slider Assembly
3-4 Slider Assembly
Billet Slider Keys (3-4 and 5-6)
3-4 Steel Fork
1-2 Bronze Fork Pads
3-4 Bronze Fork Pads
carbon syncro ring kit
new GM 2nd gear
new GM 3rd gear
new GM 5th gear
Viper Shaft
- labor & shipping
Viper 30 spline DS Yoke included
---
### Author:  [@turbo\_ls1\_ss](https://forums.speedlife.net/u/turbo_ls1_ss)
#### Post date: [October 25, 2009, 3:59pm UTC](https://forums.speedlife.net/t/built-t56-transmission-bellhousings-hydraulics-and-more-oh-my/70325/9 "2009-10-25T15:59:23Z")
i updated my first post with prices, lots of pictures, and more. take it!!!
---
### Author:  [@stmotorsports](https://forums.speedlife.net/u/stmotorsports)
#### Post date: [October 25, 2009, 7:28pm UTC](https://forums.speedlife.net/t/built-t56-transmission-bellhousings-hydraulics-and-more-oh-my/70325/10 "2009-10-25T19:28:52Z")
man im so tempted to get this for the 54
---
### Author:  [@turbo\_ls1\_ss](https://forums.speedlife.net/u/turbo_ls1_ss)
#### Post date: [October 25, 2009, 7:47pm UTC](https://forums.speedlife.net/t/built-t56-transmission-bellhousings-hydraulics-and-more-oh-my/70325/11 "2009-10-25T19:47:43Z")
do it!..
i just posted this on ls1tech a couple hours ago, and the offers are starting to pour in like on everything else i sell on there. i’d much rather not have to deal with the shipping though :tdown:
---
### Author:  [@Studderin](https://forums.speedlife.net/u/Studderin)
#### Post date: [October 25, 2009, 10:01pm UTC](https://forums.speedlife.net/t/built-t56-transmission-bellhousings-hydraulics-and-more-oh-my/70325/12 "2009-10-25T22:01:55Z")
is thats trans sandblasted? looks like sand got into shifter?