# CA aftermarket intake

**URL:** <https://forums.speedlife.net/t/ca-aftermarket-intake/140340>\
**Category:** Canada Nissan Automotive\
**Created:** [October 16, 2005, 1:12pm UTC](https://forums.speedlife.net/t/ca-aftermarket-intake/140340 "2005-10-16T13:12:37Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Dynamo7](https://avatars.discourse-cdn.com/v4/letter/d/5fc32e/32.png) [@Dynamo7](https://forums.speedlife.net/u/Dynamo7)\
**Post date:** [October 16, 2005, 1:12pm UTC](https://forums.speedlife.net/t/ca-aftermarket-intake/140340/1 "2005-10-16T13:12:37Z")

</div>

Is there anyone in Edmonton that sells an intake kit for a CA in a 180? My 180 has the stock intake still and I will be upgrading it over winter if i can find somehting good.

---

<div class="post-metadata">

**Author:** ![silvia\_sr20det\_s13](https://avatars.discourse-cdn.com/v4/letter/s/ed655f/32.png) [@silvia\_sr20det\_s13](https://forums.speedlife.net/u/silvia_sr20det_s13)\
**Post date:** [October 17, 2005, 12:57am UTC](https://forums.speedlife.net/t/ca-aftermarket-intake/140340/2 "2005-10-17T00:57:00Z")

</div>

SPECIFY!!! filter or intake mainifold! if u want a filter just use a sr20 MAF adapter and a regular cone filter

---

<div class="post-metadata">

**Author:** ![Dynamo7](https://avatars.discourse-cdn.com/v4/letter/d/5fc32e/32.png) [@Dynamo7](https://forums.speedlife.net/u/Dynamo7)\
**Post date:** [October 17, 2005, 6:27pm UTC](https://forums.speedlife.net/t/ca-aftermarket-intake/140340/3 "2005-10-17T18:27:59Z")

</div>

not the intake manifold, i mean removing the airbox and putting in a cone filter or if there is a kit that includes a new up pipe to the manifold. K&N makes a whole kit(tube filter and MAF adapter) for a 200sx turbo but it isnt very specific on which engine. I think the 200sx is the same as the 180sx but im not totally sure.

---

<div class="post-metadata">

**Author:** ![Scat](https://avatars.discourse-cdn.com/v4/letter/s/c2a13f/32.png) [@Scat](https://forums.speedlife.net/u/Scat)\
**Post date:** [October 17, 2005, 6:45pm UTC](https://forums.speedlife.net/t/ca-aftermarket-intake/140340/4 "2005-10-17T18:45:34Z")

</div>

the 200sx kit is most likely for the late 80’s 200sx (ca18e) and i highly doubt it would fit your car without modification.  
easiest thing to do is get an adapter for the maf and a cone filter.

---

<div class="post-metadata">

**Author:** ![Dynamo7](https://avatars.discourse-cdn.com/v4/letter/d/5fc32e/32.png) [@Dynamo7](https://forums.speedlife.net/u/Dynamo7)\
**Post date:** [October 17, 2005, 8:02pm UTC](https://forums.speedlife.net/t/ca-aftermarket-intake/140340/5 "2005-10-17T20:02:28Z")

</div>

No that kit is for a 1990 200SX, and the service manual says its the CA, but ive had a few instances where the 200sx comes up as like a sentra or pulsar here in north america.Where would be a good place in edmonton to get the MAF adaptor, do any necc affiliates carry them?

---

<div class="post-metadata">

**Author:** ![DeathBy240](https://avatars.discourse-cdn.com/v4/letter/d/258eb7/32.png) [@DeathBy240](https://forums.speedlife.net/u/DeathBy240)\
**Post date:** [October 17, 2005, 8:23pm UTC](https://forums.speedlife.net/t/ca-aftermarket-intake/140340/6 "2005-10-17T20:23:32Z")

</div>

Fulblown should be able to get one. They arent expensive.