# CA clutch

**URL:** <https://forums.speedlife.net/t/ca-clutch/142218>\
**Category:** Canada Nissan Automotive\
**Created:** [April 14, 2006, 6:10pm UTC](https://forums.speedlife.net/t/ca-clutch/142218 "2006-04-14T18:10:30Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Dynamo7](https://avatars.discourse-cdn.com/v4/letter/d/5fc32e/32.png) [@Dynamo7](https://forums.speedlife.net/u/Dynamo7)\
**Post date:** [April 14, 2006, 6:10pm UTC](https://forums.speedlife.net/t/ca-clutch/142218/1 "2006-04-14T18:10:30Z")

</div>

So I was doin my turbo and rear seal and found the clutch needs to be done. So my question is:  
Is there any clutches from other cars work on a CA? I saw somewhere that you can use a ka24de one but it wasnt a super reliable source. If you can use it, what kind of power can a stock ka clutch handle?

Thanks

---

<div class="post-metadata">

**Author:** ![silvia\_sr20det\_s13](https://avatars.discourse-cdn.com/v4/letter/s/ed655f/32.png) [@silvia\_sr20det\_s13](https://forums.speedlife.net/u/silvia_sr20det_s13)\
**Post date:** [April 14, 2006, 10:06pm UTC](https://forums.speedlife.net/t/ca-clutch/142218/2 "2006-04-14T22:06:39Z")

</div>

u can use ka but u need to get stuff machined for it to fit! i recomend getting one from japan! OS gikken 🙂 or OGURA they are GOOD clutches!

---

<div class="post-metadata">

**Author:** ![CA18DET-180SX](https://avatars.discourse-cdn.com/v4/letter/c/e0b2c6/32.png) [@CA18DET-180SX](https://forums.speedlife.net/u/CA18DET-180SX)\
**Post date:** [April 15, 2006, 2:42am UTC](https://forums.speedlife.net/t/ca-clutch/142218/3 "2006-04-15T02:42:26Z")

</div>

I just put a Spec Stage 4 in my car and I’m loving every minute of it, mind you its a little tricky to get used to cause of the harsh engagement but oh well.

---

<div class="post-metadata">

**Author:** ![Speed\_Dreams](https://avatars.discourse-cdn.com/v4/letter/s/cdc98d/32.png) [@Speed\_Dreams](https://forums.speedlife.net/u/Speed_Dreams)\
**Post date:** [April 15, 2006, 7:23am UTC](https://forums.speedlife.net/t/ca-clutch/142218/4 "2006-04-15T07:23:43Z")

</div>

I can get spec clutches for a reasonable price if you want PM me

---

<div class="post-metadata">

**Author:** ![Dynamo7](https://avatars.discourse-cdn.com/v4/letter/d/5fc32e/32.png) [@Dynamo7](https://forums.speedlife.net/u/Dynamo7)\
**Post date:** [April 15, 2006, 9:43am UTC](https://forums.speedlife.net/t/ca-clutch/142218/5 "2006-04-15T09:43:59Z")

</div>

> u can use ka but u need to get stuff machined for it to fit!

What do I have to get machined? Last i heard it was the alignment pin holes. I would like to get the car back on the road soon, so I’m just goin to get a oe one. I wont br building serious power for a year or 2 so ill worry about upgrading then. I just need to get the car back on the street.

---

<div class="post-metadata">

**Author:** ![Dynamo7](https://avatars.discourse-cdn.com/v4/letter/d/5fc32e/32.png) [@Dynamo7](https://forums.speedlife.net/u/Dynamo7)\
**Post date:** [April 16, 2006, 2:27pm UTC](https://forums.speedlife.net/t/ca-clutch/142218/6 "2006-04-16T14:27:53Z")

</div>

K well i went and got a KA24DE clutch, and it works! All i had to do was ream out 2 aligning holes and add one. Other than that the thing is identical to the CA one. Pedal’s a little easier to push but she works nice and grabs decently. only time will tell i guess.