# Camber

**URL:** <https://forums.speedlife.net/t/camber/81165>\
**Category:** SON240sx Automotive\
**Created:** [June 17, 2004, 1:08pm UTC](https://forums.speedlife.net/t/camber/81165 "2004-06-17T13:08:54Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Sven](https://avatars.discourse-cdn.com/v4/letter/s/e47c2d/32.png) [@Sven](https://forums.speedlife.net/u/Sven)\
**Post date:** [June 17, 2004, 1:08pm UTC](https://forums.speedlife.net/t/camber/81165/1 "2004-06-17T13:08:54Z")

</div>

How close to stock camber can you get without a camber kit after installing lower springs (H&R height. I have the Gab Supers)?

I havn’t found the time to get my car aligned yet and I noticed my front tires are starting to show signs of wear in the inside (doh!)

Any suggestions if I DO need one ?

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\
**Post date:** [June 17, 2004, 7:19pm UTC](https://forums.speedlife.net/t/camber/81165/2 "2004-06-17T19:19:27Z")

</div>

Dude I have not yet installed a camber correction in my car and My wear is not to bad. now I did tweak the factory settings as much as possibul to try and help. you can see my wear when I get you the tires (saterday?)

---

<div class="post-metadata">

**Author:** ![SHIFT\_KA24DET](https://avatars.discourse-cdn.com/v4/letter/s/b9bd4f/32.png) [@SHIFT\_KA24DET](https://forums.speedlife.net/u/SHIFT_KA24DET)\
**Post date:** [June 17, 2004, 10:50pm UTC](https://forums.speedlife.net/t/camber/81165/3 "2004-06-17T22:50:31Z")

</div>

You need an alignment is all.

The reason you never noticed it before is because it wore out the whole tire not just the inside.

---

<div class="post-metadata">

**Author:** ![jjm\_240sx](https://avatars.discourse-cdn.com/v4/letter/j/b77776/32.png) [@jjm\_240sx](https://forums.speedlife.net/u/jjm_240sx)\
**Post date:** [June 21, 2004, 10:21am UTC](https://forums.speedlife.net/t/camber/81165/4 "2004-06-21T10:21:19Z")

</div>

I have a set of new camber bolts never used if your intrested. PM me

---

<div class="post-metadata">

**Author:** ![Sven](https://avatars.discourse-cdn.com/v4/letter/s/e47c2d/32.png) [@Sven](https://forums.speedlife.net/u/Sven)\
**Post date:** [June 21, 2004, 3:24pm UTC](https://forums.speedlife.net/t/camber/81165/5 "2004-06-21T15:24:05Z")

</div>

Thanks guys.  
The car will be back at wheel & tire zone tomorrow (with NEW tie rod ends) 😉

Hopefully it will be all fixed up 🙂