# Car Audio Setups **URL:** \ **Category:** SON240sx Automotive\ **Created:** [December 27, 2007, 5:20am UTC](https://forums.speedlife.net/t/car-audio-setups/112053 "2007-12-27T05:20:34Z")\ **Posts on this page:** 10\ **Page:** 3
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [January 30, 2008, 8:19am UTC](https://forums.speedlife.net/t/car-audio-setups/112053/41 "2008-01-30T08:19:02Z")
The Tweeter install dimentions for nthe high end (My Nissan) are 1" deep, 1 7/8 cut out diameter the ones in my subie are the same, they are both 25mm tweeters. ---
**Author:** ![Hurricane](https://avatars.discourse-cdn.com/v4/letter/h/e9bcb4/32.png) [@Hurricane](https://forums.speedlife.net/u/Hurricane)\ **Post date:** [January 30, 2008, 8:26am UTC](https://forums.speedlife.net/t/car-audio-setups/112053/42 "2008-01-30T08:26:14Z")
> [@How Important Is ...](https://forums.speedlife.net/t/how-important-is/15705/3): > > Also I there is a pic of what a proper mounting plate looks like to put a 6.5" into a 4x6 hole. > > ![http://i199.photobucket.com/albums/aa55/Benson240sx/IMG_0001.jpg](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/3X/4/b/4b08d27fc61c7b8235319d6df3c68fabece00171.jpeg) > ![http://i199.photobucket.com/albums/aa55/Benson240sx/IMG_0002.jpg](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/3X/3/a/3a82cd9fc6cff6d97bf2dcabf3f5d5970f17f2f3.jpeg) Does a “proper mounting plate” always use 3 different types of screws? And does it matter which corner each screw goes in? 😛 ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [January 30, 2008, 8:31am UTC](https://forums.speedlife.net/t/car-audio-setups/112053/43 "2008-01-30T08:31:30Z")
hahaha well I was not counting those, but most of the holes were stripped and well the mettal was a little thin to tap, so you just put a big ass one on there and she is not going anyware 🙂 It sounds good and that you can not deny 🙂 and I got a price on the 8 for you but it was not good enough so I am lookin for a better deal. ---
**Author:** ![Hurricane](https://avatars.discourse-cdn.com/v4/letter/h/e9bcb4/32.png) [@Hurricane](https://forums.speedlife.net/u/Hurricane)\ **Post date:** [January 30, 2008, 5:35pm UTC](https://forums.speedlife.net/t/car-audio-setups/112053/44 "2008-01-30T17:35:51Z")
Sounds good buddy. ---
**Author:** ![spd-dmn](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/spd-dmn/32/5513_2.png) [@spd-dmn](https://forums.speedlife.net/u/spd-dmn)\ **Post date:** [January 30, 2008, 5:48pm UTC](https://forums.speedlife.net/t/car-audio-setups/112053/45 "2008-01-30T17:48:47Z")
do you have any problems with the speaker surround hitting the door panel? i made a similar looking mounting plate but the surround touches the door skin maybe the speaker isn’t low profile enough?? ![http://spddmn.com/main.php/d/623-2/P5120749.JPG](http://spddmn.com/main.php/d/623-2/P5120749.JPG) ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [January 30, 2008, 9:32pm UTC](https://forums.speedlife.net/t/car-audio-setups/112053/46 "2008-01-30T21:32:28Z")
When I crank It it does touch, that is something I am going to look at changing in the spring. ALso the drivers in my door have MAD Xmax for some nuts mid-bass, So I am sure that that is also not helping much. Ill let you know when I come up with a good solution ---
**Author:** ![DarkManX](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/darkmanx/32/5569_2.png) [@DarkManX](https://forums.speedlife.net/u/DarkManX)\ **Post date:** [January 31, 2008, 12:11am UTC](https://forums.speedlife.net/t/car-audio-setups/112053/47 "2008-01-31T00:11:08Z")
bensons a car audio nerd. ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [January 31, 2008, 5:18am UTC](https://forums.speedlife.net/t/car-audio-setups/112053/48 "2008-01-31T05:18:01Z")
Hahahahaha, Thanks 😃 It is what Pays the bills 🙂 ---
**Author:** ![googler](https://avatars.discourse-cdn.com/v4/letter/g/7993a0/32.png) [@googler](https://forums.speedlife.net/u/googler)\ **Post date:** [January 31, 2008, 9:30pm UTC](https://forums.speedlife.net/t/car-audio-setups/112053/49 "2008-01-31T21:30:39Z")
since were on the topic i got KICKER SS65.2 components for the front, and KICKER SSMB6 for my rear. i would like to mount my components up front in some way where i could use what kickers are best for, their grills. However if i were to mount them to the door, they wouldn’t be flush with the Carbon Fibre panels i have. ?'s are: 1. if i mount them to the CF panel, will i get a lot of distortion in the sound? 2. if i mount them to the CF panel, will they crack? if anyone could give me some advice on that it’d be greatly appreciated ---
**Author:** ![AhmadG](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ahmadg/32/5577_2.png) [@AhmadG](https://forums.speedlife.net/u/AhmadG)\ **Post date:** [February 1, 2008, 12:48am UTC](https://forums.speedlife.net/t/car-audio-setups/112053/50 "2008-02-01T00:48:37Z")
sry googler, I have no idea…but I did see a thread where someone drilled 6x9’s on the outsides of the front door panel, and it fit perfectly, and the grill could be mounted onto it, since it was not behind the panel. btw, I just picked up a 10" Infinity Reference 250W RMS sub in a little enclosure with a Rockford Fosgate P200.2 amp, so I guess I’ll be returning the 6x9’s that I was planning to use instead of subs lol. The problem is that the sub is a dual voice coil 4 ohm, so I can either wire it as 2 ohm parallel, or 8 ohm series. I have a 2 channel amp thats 2 ohm stable, but 4 ohm stable bridged, so I guess I’ll go one channel 2 ohm load, pushing 100W RMS. I hope its loud enough. How did you guys go on securing your subwoofer enclosures? Drilling _nervously bites nails_? Velcro??? I wanna put it right against the rear seat since it looks like this from the side (angled): /\_| lol [Previous page](https://forums.speedlife.net/t/car-audio-setups/112053.md?page=2)