# Car broke? Need winter mods? **URL:** \ **Category:** Classifieds\ **Created:** [September 29, 2009, 12:05pm UTC](https://forums.speedlife.net/t/car-broke-need-winter-mods/247180 "2009-09-29T12:05:42Z")\ **Posts on this page:** 20\ **Page:** 6
**Author:** ![oMek](https://avatars.discourse-cdn.com/v4/letter/o/aca169/32.png) [@oMek](https://forums.speedlife.net/u/oMek)\ **Post date:** [November 9, 2009, 8:11pm UTC](https://forums.speedlife.net/t/car-broke-need-winter-mods/247180/101 "2009-11-09T20:11:16Z")
> [@Ive been awake sence 5](https://forums.speedlife.net/t/ive-been-awake-sence-5/25592/10): > > I used those special tools that ninety1two40 posted. I got the bolt to move using that, but eventually it just kept rounding the head off. And yes, Honda LCA bolts are horrible. I basically had to melt the bushing to get the bolt to move. I dont think there is any bushing left in the control arm. PM’d Wayne. Rear LCA, BTW. my old integra this happend. I used a saw to cut threw the bolts and then just replaced them along with the lcas ---
**Author:** ![Code\_Blue](https://avatars.discourse-cdn.com/v4/letter/c/7ea924/32.png) [@Code\_Blue](https://forums.speedlife.net/u/Code_Blue)\ **Post date:** [November 15, 2009, 9:51am UTC](https://forums.speedlife.net/t/car-broke-need-winter-mods/247180/102 "2009-11-15T09:51:32Z")
how much to replace the up-pipe on my subaru ?? ---
**Author:** ![Auto0utcast1](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/auto0utcast1/32/6546_2.png) [@Auto0utcast1](https://forums.speedlife.net/u/Auto0utcast1)\ **Post date:** [November 15, 2009, 11:07am UTC](https://forums.speedlife.net/t/car-broke-need-winter-mods/247180/103 "2009-11-15T11:07:55Z")
go to capitalland subaru and get the upper and lower gaskets and we can do it in ur driveway in about 45 minutes. it r not hard. ---
**Author:** ![Singh1](https://avatars.discourse-cdn.com/v4/letter/s/ba8739/32.png) [@Singh1](https://forums.speedlife.net/u/Singh1)\ **Post date:** [November 15, 2009, 12:10pm UTC](https://forums.speedlife.net/t/car-broke-need-winter-mods/247180/104 "2009-11-15T12:10:07Z")
> [@Even these out?](https://forums.speedlife.net/t/even-these-out/25593/43): > > I hear AlpineSkiier’s dick is busted. Im sure he’d be willing to pay ya a few bucks to have it fixed up nice nice wayne i heard u got that new new, hook him up, not sideways ---
**Author:** ![Wayne64SS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/wayne64ss/32/6365_2.png) [@Wayne64SS](https://forums.speedlife.net/u/Wayne64SS)\ **Post date:** [November 15, 2009, 12:21pm UTC](https://forums.speedlife.net/t/car-broke-need-winter-mods/247180/105 "2009-11-15T12:21:00Z")
> [@Who's going to be cruising Wed evening??](https://forums.speedlife.net/t/whos-going-to-be-cruising-wed-evening/25828/16): > > how much to replace the up-pipe on my subaru ?? not much at all bro, gimme a pm and we can get this handled! ---
**Author:** ![Oppie1](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/oppie1/32/6374_2.png) [@Oppie1](https://forums.speedlife.net/u/Oppie1)\ **Post date:** [November 15, 2009, 6:03pm UTC](https://forums.speedlife.net/t/car-broke-need-winter-mods/247180/106 "2009-11-15T18:03:28Z")
> [@OFFICIAL Buffalo Sabres Thread](https://forums.speedlife.net/t/official-buffalo-sabres-thread/25170/3485): > > not much at all bro, gimme a pm and we can get this handled! Some good tips on NASIOC on the best approach. Not bad, really. Subbies are fun to work on :excited . ---
**Author:** ![Hank1](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/hank1/32/6329_2.png) [@Hank1](https://forums.speedlife.net/u/Hank1)\ **Post date:** [November 16, 2009, 11:32pm UTC](https://forums.speedlife.net/t/car-broke-need-winter-mods/247180/107 "2009-11-16T23:32:29Z")
> [@Another quick stereo job for a customer](https://forums.speedlife.net/t/another-quick-stereo-job-for-a-customer/25552/15): > > Lifesavers > [http://www.craftsman.com/shc/s/p\_10155\_12602\_00952166000P?vName=Tools+%26+Equipment&cName=Hand+Tools&sName=Mechanic+Tools](http://www.craftsman.com/shc/s/p_10155_12602_00952166000P?vName=Tools+%26+Equipment&cName=Hand+Tools&sName=Mechanic+Tools) tig or mig weld a nut on the end of said rounded bolt ---
**Author:** ![Code\_Blue](https://avatars.discourse-cdn.com/v4/letter/c/7ea924/32.png) [@Code\_Blue](https://forums.speedlife.net/u/Code_Blue)\ **Post date:** [November 19, 2009, 4:32pm UTC](https://forums.speedlife.net/t/car-broke-need-winter-mods/247180/108 "2009-11-19T16:32:57Z")
[quote=“Oppie1,post:25,topic:25858"”] Some good tips on NASIOC on the best approach. Not bad, really. Subbies are fun to work on :excited . [/quote] yes I have read them all, and I’m proficient with tools. but I have a bum shoulder ---
**Author:** ![Wayne64SS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/wayne64ss/32/6365_2.png) [@Wayne64SS](https://forums.speedlife.net/u/Wayne64SS)\ **Post date:** [November 19, 2009, 5:12pm UTC](https://forums.speedlife.net/t/car-broke-need-winter-mods/247180/109 "2009-11-19T17:12:10Z")
don’t look too bad 😉 pm’d you back. let’s sort this out. ---
**Author:** ![Wayne64SS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/wayne64ss/32/6365_2.png) [@Wayne64SS](https://forums.speedlife.net/u/Wayne64SS)\ **Post date:** [November 24, 2009, 12:54pm UTC](https://forums.speedlife.net/t/car-broke-need-winter-mods/247180/110 "2009-11-24T12:54:09Z")
Just wanted to say THANK YOU to whoever stickied my thread!!! :thumbup ---
**Author:** ![Oppie1](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/oppie1/32/6374_2.png) [@Oppie1](https://forums.speedlife.net/u/Oppie1)\ **Post date:** [November 25, 2009, 9:35pm UTC](https://forums.speedlife.net/t/car-broke-need-winter-mods/247180/111 "2009-11-25T21:35:07Z")
:thumbup > [@R32 Skyline winter build-up](https://forums.speedlife.net/t/r32-skyline-winter-build-up/24030/79): > > Just wanted to say THANK YOU to whoever stickied my thread!!! :thumbup ---
**Author:** ![OsoiNA6](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/osoina6/32/6301_2.png) [@OsoiNA6](https://forums.speedlife.net/u/OsoiNA6)\ **Post date:** [December 21, 2009, 8:00am UTC](https://forums.speedlife.net/t/car-broke-need-winter-mods/247180/112 "2009-12-21T08:00:23Z")
OK here’s an update. In addition to major rear end work on my 325i, Wayne’s helped me or people I know with the following: - clutch job / full suspension / brakes install on '98 Prelude (Cousin’s car) - timing belt / rear drums / front brakes on '01 Odyssey (wife’s killer street ride) All work was performed in a timely manner at a very reasonable rate. Cars were dropped off on a Saturday morning and were done by the next day. We were always kept informed about what else was found while car was apart (in Lude’s case, clutch m/c was leaky and had to be done so Wayne ordered it up and put it in there with time to spare). My cousin Brian was very happy with the work and pricing. The clutch has been great since the install over 2 months ago… Our Ody just turned 117k, so overdue for TB and brakes. Again, job was completed before schedule and Wayne was flexible in pickup/drop off so that really helped us out as I could just leave the car with him for the weekend and it was done when we got back last night. Cost was extremely reasonable considering what I would be charged to have this done by Honda. Van ran smooth on the way home and brakes felt a lot better according to the wife. I’ll update again once I drive it (and do a couple of 100-0 stops on Western Ave). J/k. Contact Wayne and ask him about stuff, he’s helpful and straight up no BS. :thumb ---
**Author:** ![Wayne64SS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/wayne64ss/32/6365_2.png) [@Wayne64SS](https://forums.speedlife.net/u/Wayne64SS)\ **Post date:** [December 21, 2009, 10:55am UTC](https://forums.speedlife.net/t/car-broke-need-winter-mods/247180/113 "2009-12-21T10:55:19Z")
> [@My Turn ver. Next Car Choices](https://forums.speedlife.net/t/my-turn-ver-next-car-choices/27527/34): > > OK here’s an update. > > In addition to major rear end work on my 325i, Wayne’s helped me or people I know with the following: > > - clutch job / full suspension / brakes install on '98 Prelude (Cousin’s car) > - timing belt / rear drums / front brakes on '01 Odyssey (wife’s killer street ride) > > All work was performed in a timely manner at a very reasonable rate. Cars were dropped off on a Saturday morning and were done by the next day. > > We were always kept informed about what else was found while car was apart (in Lude’s case, clutch m/c was leaky and had to be done so Wayne ordered it up and put it in there with time to spare). My cousin Brian was very happy with the work and pricing. The clutch has been great since the install over 2 months ago… > > Our Ody just turned 117k, so overdue for TB and brakes. Again, job was completed before schedule and Wayne was flexible in pickup/drop off so that really helped us out as I could just leave the car with him for the weekend and it was done when we got back last night. Cost was extremely reasonable considering what I would be charged to have this done by Honda. > > Van ran smooth on the way home and brakes felt a lot better according to the wife. I’ll update again once I drive it (and do a couple of 100-0 stops on Western Ave). J/k. > > Contact Wayne and ask him about stuff, he’s helpful and straight up no BS. :thumb Thanks bro! Glad we could get you all straightened out! :thumbup :thumbup now get that damn mirror fixed 🙂 ---
**Author:** ![oMek](https://avatars.discourse-cdn.com/v4/letter/o/aca169/32.png) [@oMek](https://forums.speedlife.net/u/oMek)\ **Post date:** [December 30, 2009, 9:33pm UTC](https://forums.speedlife.net/t/car-broke-need-winter-mods/247180/114 "2009-12-30T21:33:30Z")
How about swaping a radiator support, or atleast the top part in a wrx? wrecked my 02 wrx… going with a 04 front end. Have all the parts just need someone willing to tackle the support for me. ---
**Author:** ![Alpine](https://avatars.discourse-cdn.com/v4/letter/a/4da419/32.png) [@Alpine](https://forums.speedlife.net/u/Alpine)\ **Post date:** [January 5, 2010, 8:28pm UTC](https://forums.speedlife.net/t/car-broke-need-winter-mods/247180/115 "2010-01-05T20:28:53Z")
I’d like a new clutch put in my car if you’re bored. :lol What’s the going rate if I show up at your garage with the clutch kit/slave cylinder and a cooler full of beer ready to work? ---
**Author:** ![Oppie1](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/oppie1/32/6374_2.png) [@Oppie1](https://forums.speedlife.net/u/Oppie1)\ **Post date:** [January 5, 2010, 8:44pm UTC](https://forums.speedlife.net/t/car-broke-need-winter-mods/247180/116 "2010-01-05T20:44:27Z")
> [@Silver new 5 series with staggered rims on the 190 last night (4:30 am'ish)](https://forums.speedlife.net/t/silver-new-5-series-with-staggered-rims-on-the-190-last-night-4-30-amish/28057/15): > > I’d like a new clutch put in my car if you’re bored. :lol > > What’s the going rate if I show up at your garage with the clutch kit/slave cylinder and a cooler full of beer ready to work? He’s on vacation. Probably won’t get back to you for a little bit. ---
**Author:** ![Alpine](https://avatars.discourse-cdn.com/v4/letter/a/4da419/32.png) [@Alpine](https://forums.speedlife.net/u/Alpine)\ **Post date:** [January 5, 2010, 9:03pm UTC](https://forums.speedlife.net/t/car-broke-need-winter-mods/247180/117 "2010-01-05T21:03:39Z")
> [@FS: XBOX 360 Premium](https://forums.speedlife.net/t/fs-xbox-360-premium/27254/37): > > He’s on vacation. Probably won’t get back to you for a little bit. No problem, my car won’t be going anywhere for the next week or two anyway. :rofl ---
**Author:** ![Oppie1](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/oppie1/32/6374_2.png) [@Oppie1](https://forums.speedlife.net/u/Oppie1)\ **Post date:** [January 5, 2010, 9:31pm UTC](https://forums.speedlife.net/t/car-broke-need-winter-mods/247180/118 "2010-01-05T21:31:34Z")
> [@kingsario\>? :-O](https://forums.speedlife.net/t/kingsario-o/28063/3): > > No problem, my car won’t be going anywhere for the next week or two anyway. :rofl So I noticed! :eek ---
**Author:** ![Wayne64SS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/wayne64ss/32/6365_2.png) [@Wayne64SS](https://forums.speedlife.net/u/Wayne64SS)\ **Post date:** [January 9, 2010, 9:49pm UTC](https://forums.speedlife.net/t/car-broke-need-winter-mods/247180/119 "2010-01-09T21:49:28Z")
> [@Silver new 5 series with staggered rims on the 190 last night (4:30 am'ish)](https://forums.speedlife.net/t/silver-new-5-series-with-staggered-rims-on-the-190-last-night-4-30-amish/28057/15): > > I’d like a new clutch put in my car if you’re bored. :lol > > What’s the going rate if I show up at your garage with the clutch kit/slave cylinder and a cooler full of beer ready to work? Sorry man, but I don’t allow other people to work in my garage. I would be happy to get that clutch done for you though bro. Sorry about the delayed response, I was on vacation & out of the country. I will pm you a price. ---
**Author:** ![Alpine](https://avatars.discourse-cdn.com/v4/letter/a/4da419/32.png) [@Alpine](https://forums.speedlife.net/u/Alpine)\ **Post date:** [January 9, 2010, 10:21pm UTC](https://forums.speedlife.net/t/car-broke-need-winter-mods/247180/120 "2010-01-09T22:21:18Z")
I’m just going to have the deala do it, then if it blows out again they can fix it. [Previous page](https://forums.speedlife.net/t/car-broke-need-winter-mods/247180.md?page=5) [Next page](https://forums.speedlife.net/t/car-broke-need-winter-mods/247180.md?page=7)